id|mpn|title|description|link|image_link|availability|price|shipping_weight|brand|color|condition|adult|promotion_id 334-0200AV|334-0200AV|Morrison Bros. 334-0200AV 1-Inch Single Poppet Foot Valve|Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.|https://spatco.com/shop/products/morrison-bros-334-0200av-1-inch-single-poppet-foot-valve|https://spatco.com//assets/products/images/334-0200AV.jpg|in stock|112.14 USD|3 lb|Morrison Bros.||new|no| 494096|494096|Emco 494096 Riser Seal Assembly|The Emco Wheaton 494096 Riser Seal Assembly allows standing fuel or water inside a spill container to be drained into the storage tank ullage, eliminating fuel evaporation and fugitive vapor emissions.|https://spatco.com/shop/products/emco-494096-riser-seal-assembly|https://spatco.com//assets/products/images/494096.png|in stock|132.75 USD|4 lb|Emco||new|no| H11931M|H11931M|OPW H11931M 4-Inch 61SO/71SO Drop Tube O-Ring|Replacement o-ring seal for OPW 61SO and 71SO overfill valve drop tubes. |https://spatco.com/shop/products/opw-h11931m-4-inch-61so-71so-drop-tube-o-ring|https://spatco.com//assets/products/images/H11931M.jpg|in stock|6.87 USD|2 lb|OPW||new|no| 691BSS-07001V|691BSS-07001V|Morrison Bros. 691BSS-07001V 1-1/2-Inch Stainless Steel Full Port Locking Ball Valve|Ball valves are used throughout fuel piping systems where a shut off is required or desired. Lockable with a padlock.|https://spatco.com/shop/products/morrison-bros-691bss-07001v-1-1-2-inch-stainless-steel-full-port-locking-ball-valve|https://spatco.com//assets/products/images/691BSS-07001V.jpg|in stock|208.82 USD|5 lb|Morrison Bros.||new|no| 21BV-0200|21BV-0200|OPW 21BV-0200 2-Inch Full Port Two-Way Ball Valve|OPW Ball Valves are used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system. These full-port, forged brass valves feature a manual open-close arm and a quick quarter-turn handle, allowing easy shut down of your AST or UST system. Compatible with gasoline, alcohol fuels, diesel and MTBE.|https://spatco.com/shop/products/opw-21bv-0200-2-inch-full-port-two-way-ball-valve|https://spatco.com//assets/products/images/21BV-0200.jpg|in stock|121.02 USD|7 lb|OPW||new|no| FSFS120150|FSFS120150|Hose Master FSFS120150 2-Inch, Male x Male FireShield Flexible Metal Hose Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s FireShield connectors meet all specifications for aboveground and underground piping applications, and comply with NFPA and UFC codes. Connectors are designed to accept approved secondary containment systems.|https://spatco.com/shop/products/hose-master-fsfs120150-2-inch-male-x-male-fireshield-flexible-metal-hose-connector|https://spatco.com//assets/products/images/FSMM120200.jpg|in stock|211.72 USD|4 lb|Hose Master||new|no| FSMM120100|FSMM120100|Hose Master FSMM120100 1-Inch x 12-Inch, Male x Male, FireShield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s FireShield connectors meet all specifications for aboveground and underground piping applications, and comply with NFPA and UFC codes. Connectors are designed to accept approved secondary containment systems.|https://spatco.com/shop/products/hose-master-fsmm120100-1-inch-x-12-inch-male-x-male-fireshield-flex-connector|https://spatco.com//assets/products/images/FSMM120100.jpg|in stock|91.08 USD|5 lb|Hose Master||new|no| 407493002|407493002|Franklin Fueling 407493002 2-Inch EZ Fit Flange Gasket|2 EZ Fit gasket (one required per EZ Fit connection).|https://spatco.com/shop/products/franklin-fueling-407493002-2-inch-ez-fit-flange-gasket|https://spatco.com//assets/products/images/407493002.jpg|in stock|30.17 USD|2 lb|Franklin Fueling||new|no| EZ30CLAMP|EZ30CLAMP|Franklin Fueling Systems EZ30CLAMP 3-Inch EZ Fit Clamp|Franklin Fueling EZ30CLAMP is a 3-inch SS EZ Fit Clamp for FLEX-ING™ flexible connector.|https://spatco.com/shop/products/franklin-fueling-systems-ez30clamp-3-inch-ez-fit-clamp|https://spatco.com//assets/products/images/EZ30CLAMP.png|in stock|47.7 USD|4 lb|Franklin Fueling||new|no| 678XA-0100AC|678XA-0100AC|Morrison Bros. 678XA-0100AC 1-Inch Monitoring Well Plug|The locking plug for monitoring wells seals against the inside wall of the well casing to provide a watertight, tamper-proof seal.|https://spatco.com/shop/products/morrison-bros-678xa-0100ac-1-inch-monitoring-well-plug|https://spatco.com//assets/products/images/678XA-0100AC.jpg|in stock|40.87 USD|2 lb|Morrison Bros.||new|no| 62PMC-0400|62PMC-0400|OPW 62PMC-0400 Lockable Monitoring Cap|The OPW 62PMC is designed to thread or solvent-weld to a 61SPVC 4 slotted PVC monitoring-well pipe. The 62PMC is constructed of durable PVC with a stainless-steel hinge pin for resistance to rust and corrosion. The 62PMC can be locked with a longshank padlock.|https://spatco.com/shop/products/opw-62pmc-0400-lockable-monitoring-cap|https://spatco.com//assets/products/images/62PMC-0400.jpg|in stock|41.72 USD|62 lb|OPW||new|no| H15187M|H15187M|OPW H15187M Gasket for Raintight Manhole Cover|Replacement gasket seal for 700L series rain tight manhole cover.|https://spatco.com/shop/products/opw-h15187m-gasket-for-raintight-manhole-cover|https://spatco.com//assets/products/images/H15187M.jpg|in stock|60.51 USD|2 lb|OPW||new|no| E00510M|E00510M|OPW E00510M 12-Inch Cast Iron Cover for 104A Series Manholes|Replacement cast-iron cover for the OPW 104A series 12-inch manholes.|https://spatco.com/shop/products/opw-e00510m-12-inch-cast-iron-cover-for-104a-series-manholes|https://spatco.com//assets/products/images/E00510M.jpg|in stock|111.96 USD|30 lb|OPW||new|no| FC-10-SEAL|FC-10-SEAL|OPW FC-10-SEAL 10-Inch Replacement Gasket|Replacement gasket for OPW FC-10 manhole cover. |https://spatco.com/shop/products/opw-fc-10-seal-10-inch-replacement-gasket|https://spatco.com//assets/products/images/FC-10-SEAL.jpg|in stock|109.43 USD|2 lb|OPW||new|no| E00618|E00618|OPW E00618 39-1/2 Inch Grey Conquistador Composite Plain Cover with Recess Handle|Lightweight and extremely durable, composite cover manholes make sump accessibility safer and easier than ever before. Designed for use in many service station, commercial and industrial driveway applications, these manholes offer a wide variety of features to ensure the ultimate in user-friendly convenience and long-lasting performance. The Conquistador™ Duratuff® helps put an end to the risk of back, foot and hand injuries with a slip-resistant tread pattern and lightweight, low-profile construction for easier and safer access to tank sumps and other underground equipment. Replacement cover only. Manhole not included.|https://spatco.com/shop/products/opw-e00618-39-1-2-inch-grey-conquistador-composite-plain-cover-with-recess-handle|https://spatco.com//assets/products/images/E00618.jpg|in stock|1190.02 USD|83 lb|OPW|Grey|new|no| 1SC-2105|1SC-2105|OPW 1SC-2105 5-Gallon, Slip-On Spill Container Sealable Cover|OPW Slip-On Spill Containment Manholes are used on new or existing UST riser pipes. The spill bucket slides onto 3 or 4 fill and vapor return riser pipes and is then  secured in place. Slip-on spill containers provide a fast, economical way to replace uncontained manholes or fill boxes.|https://spatco.com/shop/products/opw-1sc-2105-5-gallon-slip-on-spill-container-sealable-cover|https://spatco.com//assets/products/images/1SC-2105.png|in stock|1081.81 USD|45 lb|OPW||new|no| A0717-122|A0717-122|Emco A0717-122 12-Inch Round Steel Manhole|The Emco Wheaton A0717 multi-purpose manhole provides access to all types of underground storage or containment vessels and meets AASHTO H20 wheel loading.|https://spatco.com/shop/products/emco-a0717-122-12-inch-round-steel-manhole|https://spatco.com//assets/products/images/A0717-122.png|in stock|147.97 USD|30 lb|Emco||new|no| P040-02-030|P040-02-030|Verifone P040-02-030 Thermal Receipt Printer|Verifone thermal receipt printer for Sapphire, Topaz, and Ruby systems.|https://spatco.com/shop/products/verifone-p040-02-030-thermal-receipt-printer|https://spatco.com//assets/products/images/P040-02-030.jpg|in stock|444.29 USD|10 lb|Verifone||new|no| BPK149-001-01-R|BPK149-001-01-R|Verifone BPK149-001-01-R Site Controller Battery Pack|Replacement battery pack for Verifone Commander site controller.|https://spatco.com/shop/products/verifone-bpk149-001-01-r-site-controller-battery-pack|https://spatco.com//assets/products/images/BPK149-001-01-R.jpg|in stock|205 USD|5 lb|Verifone||new|no| 33469203|33469203|Ameron 33469203 3-Inch LCX Containment Tee (2 Piece)|LCX rigid fiberglass coaxial piping is a cost-effective solution for contained piping systems. LCX is used for product delivery lines in underground fuel handling systems to convey fuel from the tank to the dispensers.|https://spatco.com/shop/products/ameron-33469203-3-inch-lcx-containment-tee-2-piece|https://spatco.com//assets/products/images/33469203.jpg|in stock|265.65 USD|3 lb|Ameron||new|no| 33469202|33469202|Ameron 33469202 3-Inch LCX 45-Degree Containment Elbow (2 Piece)|LCX rigid fiberglass coaxial piping is a cost-effective solution for contained piping systems. LCX is used for product delivery lines in underground fuel handling systems to convey fuel from the tank to the dispensers.|https://spatco.com/shop/products/ameron-33469202-3-inch-lcx-45-degree-containment-elbow-2-piece|https://spatco.com//assets/products/images/33469202.jpg|in stock|210.94 USD|3 lb|Ameron||new|no| 22482735|22482735|Ameron 22482735 2-Inch LCX Rubber Closure without Test Port|2-Inch LCX rubber closure without test port.|https://spatco.com/shop/products/ameron-22482735-2-inch-lcx-rubber-closure-without-test-port|https://spatco.com//assets/products/images/22482735.jpg|in stock|59.5 USD|3 lb|Ameron||new|no| 012040-101-4|012040-101-4|Ameron 012040-101-4 4-Inch Primary Sleeve Coupling|Used for joining 4-inch primary piping.|https://spatco.com/shop/products/ameron-012040-101-4-4-inch-primary-sleeve-coupling|https://spatco.com//assets/products/images/012040-101-4.jpg|in stock|47.6 USD|0 lb|Ameron||new|no| 012040-231-4|012040-231-4|Ameron 012040-231-4 Red Thread 4x3 Fiberglass Reducer Bushing|Female NPT threads.|https://spatco.com/shop/products/ameron-012040-231-4-red-thread-4x3-fiberglass-reducer-bushing|https://spatco.com//assets/products/images/012040-231-4.jpg|in stock|91.91 USD|3 lb|Ameron||new|no| 012040-238-3|012040-238-3|Ameron 012040-238-3 4-Inch x 3-Inch Concentric Reducer (2 Piece)|Fiberglass clamshell secondary containment concentric reducer.|https://spatco.com/shop/products/ameron-012040-238-3-4-inch-x-3-inch-concentric-reducer-2-piece|https://spatco.com//assets/products/images/012040-238-3.jpg|in stock|89.3 USD|5 lb|Ameron||new|no| 32387605|32387605|Ameron 32387605 3-Inch x 2-Inch Secondary Containment Reducer (2 Piece)|Fiberglass clamshell secondary containment reducer.|https://spatco.com/shop/products/ameron-32387605-3-inch-x-2-inch-secondary-containment-reducer-2-piece|https://spatco.com//assets/products/images/32387605.jpg|in stock|82.5 USD|5 lb|Ameron||new|no| 32387604|32387604|Ameron 32387604 3-Inch x 2-Inch Secondary Containment Reducer with 3/4-Inch Test Port (2 Piece)|Secondary containment reducer with test port.|https://spatco.com/shop/products/ameron-32387604-3-inch-x-2-inch-secondary-containment-reducer-with-3-4-inch-test-port-2-piece|https://spatco.com//assets/products/images/32387604.jpg|in stock|177.5 USD|5 lb|Ameron||new|no| 012040-101-3|012040-101-3|Ameron 012040-101-3 4-Inch 2-Piece Secondary Containment Coupling|Fiberglass clamshell secondary containment coupling.|https://spatco.com/shop/products/ameron-012040-101-3-4-inch-2-piece-secondary-containment-coupling|https://spatco.com//assets/products/images/012040-101-3.jpg|in stock|236.4 USD|5 lb|Ameron||new|no| 012030-235-3|012030-235-3|Ameron 012030-235-3 3-Inch x 2-Inch Reducer without Tap (2 Piece)|Fiberglass clamshell secondary containment split coupling.|https://spatco.com/shop/products/ameron-012030-235-3-3-inch-x-2-inch-reducer-without-tap-2-piece|https://spatco.com//assets/products/images/012030-235-3_2.jpg|in stock|112.5 USD|5 lb|Ameron||new|no| M05912A003|M05912A003|Gilbarco Left, Lift-to-Start Nozzle Boot Assembly for Enhance Encore|Replacement Lift-to-Start Nozzle Boot Assembly for Gilbarco Encore. Lift tab on left. |https://spatco.com/shop/products/gilbarco-left-lift-to-start-nozzle-boot-assembly-for-enhance-encore|https://spatco.com//assets/products/images/M05912A003.jpg|in stock|84.18 USD|4 lb|Gilbarco||new|no| M13977B001|M13977B001|Gasboy M13977B001 Spring Handle|Replacement Gasboy spring handle.|https://spatco.com/shop/products/gasboy-m13977b001-spring-handle|https://spatco.com//assets/products/images/M13977B001.jpg|in stock|20.52 USD|1 lb|Gasboy||new|no| R19457|R19457|Gilbarco R19457 High-Capacity Strainer Insert|Part of the Gilbarco Gasboy external filter kit.|https://spatco.com/shop/products/gilbarco-r19457-high-capacity-strainer-insert|https://spatco.com//assets/products/images/R19457.jpg|in stock|6.88 USD|1 lb|Gilbarco||new|no| WM040446-0002-R|WM040446-0002-R|Wayne WM040446-0002-R Xflo Meter, Iron Body with Low Height, Nickel-Plated Aluminum Dome|Wayne Xflo meter with iron body and low height, nickel-plated aluminum dome for use with E85 or gasoline. Does not include the inlet casting, filter or pulser.|https://spatco.com/shop/products/wayne-wm040446-0002-r-xflo-meter-iron-body-with-low-height-nickel-plated-aluminum-dome|https://spatco.com//assets/products/images/WM040446-0002-R.jpg|in stock|2236.82 USD|45 lb|Wayne||new|no| BP-1396-290|BP-1396-290|SVI International BP-1396-290 3/4-Inch ID x 1-1/8-Inch OD Conventional Hose Clamp with White Insert|Clamshell-style retractor cable clamp for 29,0mm OD cable, hose, or wire.|https://spatco.com/shop/products/svi-international-bp-1396-290-3-4-inch-id-x-1-1-8-inch-od-conventional-hose-clamp-with-white-insert|https://spatco.com//assets/products/images/BP-1396-290.png|in stock|14.86 USD|2 lb|SVI International||new|no| 13005-5|13005-5|Wayne 13005-5 101 4-Wheel, Non-Computer, Wheels in Top Position, Configured for Tokheim Electric Reset|Non-computer, wheels in top position, configured for a Tokheim Electric Reset with a top drive coupling on the right side of the computer.  Used with Tokheim power reset pumps. Refund of $147.32 with return of core.|https://spatco.com/shop/products/wayne-13005-5-101-4-wheel-non-computer-wheels-in-top-position-configured-for-tokheim-electric-reset|https://spatco.com//assets/products/images/13005-5.jpg|in stock|496.06 USD|4 lb|Wayne||new|no| ENE0615G005|ENE0615G005|Gilbarco ENE0615G005 ADA Printer Door Softkey Graphic Overlay With Monochrome Softkeys|ADA printer door softkey graphic overlay with monochrome softkeys for use with Encore 500 S and Encore 700 S dispensers.|https://spatco.com/shop/products/gilbarco-ene0615g005-ada-printer-door-softkey-graphic-overlay-with-monochrome-softkeys|https://spatco.com//assets/products/images/ENE0615G005.jpg|in stock|67.18 USD|2 lb|Gilbarco||new|no| WM040824-0012|WM040824-0012|Wayne WM040824-0012 Dual Price Point LCD Display Module|Replacement dual price point PPU module for Helix dispensers. |https://spatco.com/shop/products/wayne-wm040824-0012-dual-lcd-display-module|https://spatco.com//assets/products/images/WM040824-0012.jpg|in stock|63.54 USD|4 lb|Wayne||new|no| M10369B003|M10369B003|Gilbarco M10369B003 5.7-Inch Color Display|This replacement 5.7 color display fits Gilbarco Advantage and Encore 300/500/500S/700S dispensers.|https://spatco.com/shop/products/gilbarco-m10369b003-5-7-inch-color-display|https://spatco.com//assets/products/images/M10369B003.png|in stock|2375.82 USD|5 lb|Gilbarco||new|no| T18350-G3R|T18350-G3R|Gilbarco T18350-G3R Rebuilt Pulser 125/175 Volt Assembly|Replacement pulser assembly for Gilbarco Advantage dispensers. |https://spatco.com/shop/products/gilbarco-t18350-g3r-rebuilt-pulser-125-175-volt-assembly|https://spatco.com//assets/products/images/T18350-G3R.png|in stock|150 USD|6 lb|Gilbarco||new|no| R19096-G1|R19096-G1|Gilbarco R19096-G1 Advantage Pulser Drive Assembly|Replacement pulser drive assembly for Gilbarco Advantage dispenser.|https://spatco.com/shop/products/gilbarco-r19096-g1-advantage-pulser-drive-assembly|https://spatco.com//assets/products/images/R19096-G1.jpg|in stock|40.5 USD|6 lb|Gilbarco||new|no| W2893591-001|W2893591-001|Wayne W2893591-001 Dual Head Card Reader|Replacement dual head card reader to be used in Wayne Ovation, Ovation2 and Helix dispensers. |https://spatco.com/shop/products/wayne-w2893591-001-dual-head-card-reader|https://spatco.com//assets/products/images/W2893591-001.png|in stock|368.96 USD|3 lb|Wayne||new|no| ENE0201G001|ENE0201G001|Gilbarco ENE0201G001 Main Display Overlay|Standard gallons main display graphic, white on black for Gilbarco Encore dispensers.|https://spatco.com/shop/products/gilbarco-ene0201g001-main-display-overlay|https://spatco.com//assets/products/images/ENE0201G001.jpg|in stock|27.84 USD|2 lb|Gilbarco||new|no| M07220K001|M07220K001|Gilbarco M07220K001 Ultra-Hi Flow™ Valve with Coil|Two-stage valve, with coil and conduit. 1-1/4 threaded ports.|https://spatco.com/shop/products/gilbarco-m07220k001-ultra-hi-flow-valve-with-coil|https://spatco.com//assets/products/images/M07220K001.png|in stock|1943.41 USD|5 lb|Gilbarco||new|no| M02958A002|M02958A002|Gilbarco M02958A002 Proportional Valve Coil Assembly for Encore 300/500|Replacement proportional valve coil assembly for Encore 300/500 dispensers. |https://spatco.com/shop/products/gilbarco-m02958a002-proportional-valve-coil-assembly-for-encore-300-500|https://spatco.com//assets/products/images/M02958A002.jpg|in stock|159.87 USD|3 lb|Gilbarco||new|no| PI-SSL-250G-BK|PI-SSL-250G-BK|Performance Ink PI-SSL-250G-BK Roll of 250 Black Security Seals|Roll of 250 stickers for all dispensers to be used as security seals.|https://spatco.com/shop/products/performance-ink-pi-ssl-250g-bk-roll-of-250-black-security-seals|https://spatco.com//assets/products/images/PI-SSL-250G-BK.png|in stock|81.36 USD|2 lb|Performance Ink|Black|new|no| CP16HW.75|CP16HW.75|Husky CP16HW.75 1” x 9 Black Hardwall Assembly Hose with Brass Couplings|The Husky CP16HW.75 1-Inch M NPTF by 9-Inch Hardwall Black Whip Hose with Permanent Couplings is a supreme quality whip hose for fueling applications. Connects inline between nozzle and dispenser. Can be used in conjunction with a break away.|https://spatco.com/shop/products/husky-cp16hw-75-1-x-9-black-hardwall-assembly-hose-with-brass-couplings|https://spatco.com//assets/products/images/CP16HW.75.jpg|in stock|65.13 USD|2 lb|Husky||new|no| 75B-008-S2F2|75B-008-S2F2|Franklin Fueling 75B-008-S2F2 3/4-Inch x 8-Inch HEALY™ Coaxial Hose with Swivel x Fixed Ends|The Franklin Fueling 75B-008-S2F2 whip hose is designed for use in vapor recovery refueling applications to improve air quality and emissions. For use with 8710-VV breakaway and HEALY™ product hose.|https://spatco.com/shop/products/franklin-fueling-75b-008-s2f2-3-4-inch-x-8-inch-healy-coaxial-hose-with-swivel-x-fixed-ends|https://spatco.com//assets/products/images/75B-008-S2F2.jpg|in stock|89 USD|3 lb|Franklin Fueling||new|no| 66H-0975-E85|66H-0975-E85|OPW 66H-0975-E85 3/4-Inch x 9-Inch Straightening Whip Hose|The 66H-0975-E85 hoses are third-party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-85. Maximum working pressure 50PSI.|https://spatco.com/shop/products/opw-66h-0975-e85-3-4-inch-x-9-inch-straightening-whip-hose|https://spatco.com//assets/products/images/66H-0975-E85.png|in stock|124.4 USD|2 lb|OPW||new|no| SDN075GAN|SDN075GAN|Fill-Rite SDN075GAN 3/4-Inch Green Automatic Diesel Spout Nozzle|The SDN075GAN is a 0.75 automatic shutoff nozzle designed for fuel transfer. This model is designed for diesel applications with a 15/16 spout size and green jacket. The SD Series nozzles from Fill-Rite usher in a new era of both value and performance. These nozzles are graded standard-duty and are offered at competitive prices, yet still feature the trusted Fill-Rite reliability and durability customers expect. Please note: Fill-Rite auto shut off nozzles are not intended to be used for gravity flow systems|https://spatco.com/shop/products/fill-rite-sdn075gan-3-4-inch-green-automatic-diesel-spout-nozzle|https://spatco.com//assets/products/images/SDN075GAN.png|in stock|79.99 USD|6 lb|Fill-Rite|Green|new|no| SDN075RAN|SDN075RAN|Fill-Rite SDN075RAN 3/4-Inch Red Automatic Gasoline Spout Nozzle|The SDN075RAN is a 0.75 automatic shutoff nozzle designed for fuel transfer. This model is designed for gasoline applications with a 13/16 spout size and red jacket. The SD Series nozzles from Fill-Rite usher in a new era of both value and performance. These nozzles are graded standard-duty and are offered at competitive prices, yet still feature the trusted Fill-Rite reliability and durability customers expect. Please note: Fill-Rite auto shut off nozzles are not intended to be used for gravity flow systems|https://spatco.com/shop/products/fill-rite-sdn075ran-3-4-inch-red-automatic-gasoline-spout-nozzle|https://spatco.com//assets/products/images/SDN075RAN.png|in stock|79.99 USD|6 lb|Fill-Rite|Red|new|no| N100DAU12G|N100DAU12G|Fill-Rite N100DAU12G 1-Inch Green Automatic Diesel Spout Nozzle|The N100DAU12G is a 1 ultra-high-flow automatic shutoff nozzle designed for fuel transfer. This model is equipped with a 1-1/8 spout and a green jacket, ideal for diesel applications. Please note: Fill-Rite auto shut off nozzles are not intended to be used for gravity flow systems|https://spatco.com/shop/products/fill-rite-n100dau12g-1-inch-green-automatic-diesel-spout-nozzle|https://spatco.com//assets/products/images/N100DAU12G.png|in stock|164.99 USD|6 lb|Fill-Rite|Green|new|no| 7H-5100|7H-5100|OPW 7H-5100 Green Automatic Shut-Off Nozzle without Spout Ring|For Heavy-Duty, High-Flow Truck, Bus and Fleet Service. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. 7H Nozzles are no longer permitted and sold with Hold-Open Clips per UL 2586 requirements.|https://spatco.com/shop/products/opw-7h-5100-green-automatic-shut-off-nozzle-without-spout-ring|https://spatco.com//assets/products/images/7H-5100.png|in stock|166.27 USD|8 lb|OPW|Green|new|no| 177610-02|177610-02|Husky 177610-02 VIIIS Red Heavy Duty Diesel Nozzle with Three Notch Hold Open Clip|Pressure activated, automatic shut-off nozzle for truck stop and other high volume full-service, self-service and unattended stations. VIIIS nozzle shuts off when - the pump shuts off.- the gas tank is full.- the lever is opened before the pump is turned on.- the leak detector has not completed the test cycle. Spout is reinforced with thick aluminum bushing that retains spout spring and keeps spout from rounding-in: the two leading causes of clicking off and splash-back spillage. Nozzle is equipped with a unique Flo-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Comes standard with smooth full grip guard and waffle splash guard.|https://spatco.com/shop/products/husky-177610-02-viiis-red-heavy-duty-diesel-nozzle-with-three-notch-hold-open-clip|https://spatco.com//assets/products/images/177610-02.png|in stock|127.48 USD|8 lb|Husky||new|no| 11AP-0500|11AP-0500|OPW 11AP-0500 Blue Unleaded Nozzle Without Hold Open Clip 3/4 Inch Inlet|The OPW 11 Series automatic nozzles are OPW’s premium conventional nozzles for safe retail and commercial petroleum filling. The OPW 11 Series is the most trusted conventional nozzle in the world for full service use. Compatible up to E10 (10% Ethanol). Unleaded nozzles are designed for appropriate flow rates and have smaller diameter spouts than diesel or leaded gasoline spouts.|https://spatco.com/shop/products/opw-11ap-0500-blue-unleaded-nozzle-without-hold-open-clip-3-4-inch-inlet|https://spatco.com//assets/products/images/11AP-0500.jpg|in stock|92.87 USD|8 lb|OPW|Blue|new|no| 60003|60003|Cim-Tek 60003 Vapor Control Pre-Vent Fill Cap|For use on above ground farm tanks, fuel transfer tanks, and oil tanks.|https://spatco.com/shop/products/cim-tek-60003-vapor-control-pre-vent-fill-cap|https://spatco.com//assets/products/images/60003.jpg|in stock|13.67 USD|2 lb|Central Illinois||new|no| H10886M|H10886M|OPW H10886M 3 Replacement Gasket for 1711T Vapor Recovery Cap|Replacement nitrile gasket for OPW 1711T vapor recovery cap.|https://spatco.com/shop/products/opw-h10886m-3-replacement-gasket-for-1711t-vapor-recovery-cap|https://spatco.com//assets/products/images/H10886M.jpg|in stock|18.72 USD|1 lb|OPW||new|no| 633TC-8090|633TC-8090|OPW 633TC-8090 4-Inch Anodized Aluminum Coaxial Vapor Recovery Adaptor|OPW coaxial vapor recovery fittings provide an easy, inexpensive means to convert existing conventional 4 underground storage tank fill pipes to coaxial vapor recovery installations when Stage I Vapor Recovery is required. Normally, little or no digging or breaking of concrete is necessary. Simply remove existing tight-fill adaptor and drop tube (if installation is so equipped), and insert an OPW 61TC Coaxial Drop Tube and the 633TC Adaptor. The OPW 633TC Adaptor is designed to mate with a coaxial delivery elbow.|https://spatco.com/shop/products/opw-633tc-8090-4-inch-anodized-aluminum-coaxial-vapor-recovery-adaptor|https://spatco.com//assets/products/images/633TC-8090.jpg|in stock|100.83 USD|3 lb|OPW||new|no| 62M-0375|62M-0375|OPW 62M-0375 Monitor Probe Cap Adaptor Kit|Monitoring Probe Caps are installed on tank riser pipes to help prevent vapors from escaping or water from entering the tank. Monitoring Probe Caps include a wire grommet fitting to accommodate the electronic tank gauge probe. The OPW Monitoring Probe Adaptor Kit includes a 4 side-sealing adaptor, 4 side-sealing cap (tapped), and a 3/8 wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe. A bracket, located on the underside of the cap, is provided to install a tension wire to relieve strain on probe cables. The 62M-0375 is gasketed to seal against water and debris entering, or vapors from escaping the tank. The cap includes provisions for a padlock to secure entry.|https://spatco.com/shop/products/opw-62m-0375-monitor-probe-cap-adaptor-kit|https://spatco.com//assets/products/images/62M-0375.png|in stock|96.65 USD|4 lb|OPW||new|no| 305XP-1200ACEVR|305XP-1200ACEVR|Morrison Bros. 305XP-1200ACEVR 4-Inch Tank Monitoring Cap|Tank monitor caps are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. 1/2” threaded (NPT) hole for cable connector.|https://spatco.com/shop/products/morrison-bros-305xp-1200acevr-4-inch-tank-monitoring-cap|https://spatco.com//assets/products/images/305XP-1200ACEVR.jpg|in stock|73.59 USD|4 lb|Morrison Bros.||new|no| 116M-0375|116M-0375|OPW 116M-0375 Monitor Probe Cap|The OPW 116M-0375 Monitor Probe Cap is a standard 116 4-Inch threaded pipe cap, drilled and tapped to accept a 3/8 wire grommet to secure an electronic tank-gauge prop in a tank riser pipe. The cap is gasketed for vapor and watertight service.|https://spatco.com/shop/products/opw-116m-0375-monitor-probe-cap|https://spatco.com//assets/products/images/116M-0375.png|in stock|58.93 USD|2 lb|OPW||new|no| A0076-124S|A0076-124S|Emco A0076-124S Vapor Swivel Adapter|The Emco Wheaton A0076-124S Vapor Swivel Adapter typically installs on the tank vapor riser. The top of the adapter rotates 360 degrees while the base is stationary, preventing accidental loosening from the riser during fuel deliveries. A normally closed poppet valve opens to recover the vapor.|https://spatco.com/shop/products/emco-a0076-124-vapor-swivel-adapter|https://spatco.com//assets/products/images/A0076-124S.png|in stock|310.92 USD|12 lb|Emco||new|no| A0097-005|A0097-005|Emco Wheaton A0097-005 Tight Top Seal Fill Cap, 4-Inch, EVR|The caps are lockable and feature a self-aligning, toggle-action design with a center collar to prevent breakage. Emco’s adapter caps fit all Emco and major competitor 4” cam and groove style adapters. |https://spatco.com/shop/products/emco-wheaton-a0097-005-tight-top-seal-fill-cap-4-inch-evr|https://spatco.com//assets/products/images/A0097-005.jpg|in stock|45.9 USD|4 lb|Emco||new|no| 305L-0200AA|305L-0200AA|Morrison Bros. 305L-0200AA 4-Inch Top Seal Adaptor with Internal Lugs|Top seal adaptors are installed on underground and aboveground storage tank fill ports and riser pipes where a tight fill connection is required. 2-5/16″ Height. Body: Brass. Gasket: Buna-N.|https://spatco.com/shop/products/morrison-bros-305l-0200aa-4-inch-top-seal-adaptor-with-internal-lugs|https://spatco.com//assets/products/images/305L-0200AA.png|in stock|78.96 USD|4 lb|Morrison Bros.||new|no| ZE381|ZE381|Zeeline By Milton ZE381 Lever Action Pump for 15-55 Gallon Drum|High Flow Output: Dispensing at a rate of 1 gallon per 9 strokes or 1/2 quart per stroke. With a max fluid viscosity of 40 wt, this drum pump is designed to thread onto 2 bung openings of a 15-55 gallon drum. Threaded Spout: Spout end includes an integrated garden hose thread. Attaching a hose end allows more accurate dispensing and reduces the likelihood of spills. Ensure precision in every use! Fits A Variety of Barrel Types: This lever action drum pump features 3 different locking positions for more precise fluid delivery. Telescoping suction tube allows for use with 15 to 55-Gallon barrels with 2” bung openings. Durable Construction: This Barrel Pump has a steel with Die-Cast aluminum head and base. Designed with professionals in mind the suction tube is telescoping PVC. |https://spatco.com/shop/products/zeeline-by-milton-ze381-lever-action-pump-for-15-55-gallon-drum|https://spatco.com//assets/products/images/ZE381.jpg|in stock|57.62 USD|9 lb|Milton Industries||new|no| WU023181-0001|WU023181-0001|Wayne WU023181-0001 Dual PPU / Cash Credit - Unit Price Module|Replacement Cash/Credit PPU display for Wayne Ovation dispensers.|https://spatco.com/shop/products/wayne-wu023181-0001-dual-ppu-cash-credit-unit-price-module|https://spatco.com//assets/products/images/WU023181-0001.jpg|in stock|118.58 USD|5 lb|Wayne||new|no| WU019854-0001|WU019854-0001|Wayne WU019854-0001 DFS Wireless Connect Access Point|Wireless Forecourt Access Point With Network Switch. The Wireless Forecourt Access Point offers secure and reliable local wireless networking connectivity to fuel dispensers. In addition to the wireless local area network and secure managed switch has been integrated into the unit to connect additional fuel centerdevices like your point-of-sale system, merchant service gateway and/or forecourt controller.|https://spatco.com/shop/products/wayne-wu019854-0001-dfs-wireless-connect-access-point|https://spatco.com//assets/products/images/WU019854-0001.jpeg|in stock|814.88 USD|12 lb|Wayne||new|no| WU016603-0001|WU016603-0001|Wayne WU016603-0001 1-5 Product UPD Programed Board|Replacement electronic board used in Helix dispensers. |https://spatco.com/shop/products/wayne-wu016603-0001-1-5-product-upd-programed-board|https://spatco.com//assets/products/images/WU016603-0001.jpg|in stock|275.88 USD|5 lb|Wayne||new|no| WU016104-0001|WU016104-0001|Wayne WU016104-0001 Product Select Switch|Replacement product select switch for Wayne Helix dispensers. |https://spatco.com/shop/products/wayne-wu016104-0001-product-select-switch|https://spatco.com//assets/products/images/WU016104-0001.png|in stock|81.53 USD|4 lb|Wayne||new|no| WU013661-0001|WU013661-0001|Wayne WU013661-0001 SPM Keypad Gasket For Ovation2 and Helix Dispenser|Replacement SPM keypad gasket for Ovation 2 and Helix dispensers.|https://spatco.com/shop/products/wayne-wu013661-0001-spm-keypad-gasket-for-ovation2-and-helix-dispenser|https://spatco.com//assets/products/images/WU013661-0001.jpg|in stock|13.35 USD|2 lb|Wayne||new|no| WU012783-0001-R|WU012783-0001-R|Wayne WU012783-0001-R Rebuilt DW-14 Thermal Printer without Sensor and Cable|Replacement thermal printer for Ovation 2 and Helix dispensers. Refund of $350.00 with return of core.|https://spatco.com/shop/products/wayne-wu012783-0001-r-rebuilt-dw-14-thermal-printer-without-sensor-and-cable|https://spatco.com//assets/products/images/WU012783-0001-R.webp|in stock|900 USD|12 lb|Wayne||new|no| WU010913-0001|WU010913-0001|Wayne WU010913-0001 10.4-Inch Soft Key Pad / Bracket Assembly|Replacement key pad bracket assembly for use with the Wayne Ovation 2 dispenser.|https://spatco.com/shop/products/wayne-wu010913-0001-10-4-inch-soft-key-pad-bracket-assembly|https://spatco.com//assets/products/images/WU010913-0001.jpg|in stock|431.94 USD|5 lb|Wayne||new|no| WU010587-0001|WU010587-0001|Wayne WU010587-0001 E3 Vice Action Compression Key|Wayne compression key for Wayne Ovation dispensers.|https://spatco.com/shop/products/wayne-wu010587-0001-e3-vice-action-compression-key|https://spatco.com//assets/products/images/WU010587-0001.jpg|in stock|23.9 USD|0 lb|Wayne||new|no| WU009754-0001|WU009754-0001|Wayne WU009754-0001 E3 Vice Action Compression Lock|Wayne compression lock kit for Wayne Ovation dispensers. |https://spatco.com/shop/products/wayne-wu009754-0001-e3-vice-action-compression-lock|https://spatco.com//assets/products/images/WU009754-0001.jpg|in stock|128.02 USD|2 lb|Wayne||new|no| WU008231-0001|WU008231-0001|Generic WU008231-0001 85-93 Octane Actuator Decal Kit for Helix Dispenser|This high-quality, generic actuator sticker is engineered to ensure long-lasting visibility and resilience against frequent use. Designed for easy application and durable performance.|https://spatco.com/shop/products/generic-wu008231-0001-85-93-octane-actuator-decal-kit-for-helix-dispenser|https://spatco.com//assets/products/images/WU008231-0001.jpg|in stock|25.65 USD|2 lb|Wayne||new|no| WU007681|WU007681|Wayne WU007681 Key Coded DW2|Replacement key for Wayne Helix dispenser.|https://spatco.com/shop/products/wayne-wu007681-key-coded-dw2|https://spatco.com//assets/products/images/WU007681.jpg|in stock|23.9 USD|2 lb|Wayne||new|no| WU007563-0001|WU007563-0001|Wayne WU007563-0001 Unit Price Control Display Board for Helix|For use in Wayne Helix dispensers. Controls and displays unit price information.|https://spatco.com/shop/products/wayne-wu007563-0001-unit-price-control-display-board-for-helix|https://spatco.com//assets/products/images/WU007563-0001.jpg|in stock|296.16 USD|6 lb|Wayne||new|no| WU004677|WU004677|Wayne WU004677 Ovation 5.7 QVGA Display (FSTN) with LED Backlight|QVGA display for Wayne Ovation 2 and Helix dispensers. Features LED backlight and 109mm-wide viewing area.|https://spatco.com/shop/products/wayne-wu004677-ovation-5-7-qvga-display-fstn-with-led-backlight|https://spatco.com//assets/products/images/WU004677.jpg|in stock|461.21 USD|6 lb|Wayne||new|no| WU000371-001|WU000371-001|Wayne WU000371-0001 XWIP1 Pulser Kit|For all Wayne Select dispenser models except S1-3/G71xx only.|https://spatco.com/shop/products/wayne-wu000371-0001-xwip1-pulser-kit|https://spatco.com//assets/products/images/WU000371-001.png|in stock|297.71 USD|9 lb|Wayne||new|no| WU000371-0002|WU000371-0002|Wayne WU000371-0002 XWIP II Service Pulser, UL|Replacement Wayne Service Pulser. |https://spatco.com/shop/products/wayne-wu000371-0002-xwip-ii-service-pulser-ul|https://spatco.com//assets/products/images/WU000371-0002.jpeg|in stock|297.71 USD|9 lb|Wayne||new|no| WM061355-0002|WM061355-0002|Wayne WM061355-0002 Smart Security Controller Switch Board for Door|For use in Ovation2 HS Ultra High Capacity Fuel DEF dispensers.|https://spatco.com/shop/products/wayne-wm061355-0002-smart-security-controller-switch-board-for-door|https://spatco.com//assets/products/images/WM061355-0002.jpg|in stock|275.24 USD|5 lb|Wayne||new|no| WM001908-0014-R|WM001908-0014-R|Wayne WM001908-0014-R Rebuilt Global Full CPU Board (ST10F276)|The Wayne iGEM 1.5 computer (p/n WM001908-0014-R) is used for new dispensers and service replacements. iGEM software version 82.00 is the minimum version for these boards and requires ServTerm version 7.0.37. iGEM software. Versions lower than 82.00 will not work with this board, and will require performing the boot-strap procedure to correct the issue. Refund of $445.00 with return of core.|https://spatco.com/shop/products/wayne-wm001908-0014-r-rebuilt-global-full-cpu-board-st10f276|https://spatco.com//assets/products/images/WM001908-0014-R.jpg|in stock|1345.04 USD|5 lb|Wayne||new|no| WU002549-0001|WU002549-0001|Wayne WU002549-0001 iX Jade Board VGA Display Backlight Driver Cable Rev. 02|Driver cable for use with W2894472-002-700 iX Pay SPM 2.5 EMV US Keypad Assembly.|https://spatco.com/shop/products/wayne-wu002549-0001-ix-jade-board-vga-display-backlight-driver-cable-rev-02|https://spatco.com//assets/products/images/WU002549-0001.jpg|in stock|16.8 USD|2 lb|Wayne||new|no| W2894472-002-700|W2894472-002-700|Wayne W2894472-002-700 iX Pay SPM 2.5 EMV US Keypad Assembly (Generic/No Injection)|The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. Does not ship with SPM Keypad Gasket. iX Pay SPM 2.5 (W2894472-002-xxx) replaces SPM1 keypad (892638-006-xxx/892638-106-xxx) in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.|https://spatco.com/shop/products/wayne-w2894472-002-700-ix-pay-spm-2-5-emv-us-keypad-assembly-blank|https://spatco.com//assets/products/images/W2894472-002-700.jpg|in stock|1289.15 USD|4 lb|Wayne||new|no| W2894103-002|W2894103-002|Wayne W2894103-002 P95 Secure Card Reader Service Kit|Kit is used in Gilbarco Encore 500/700 ECIM models. Includes WU017568-0001 P95 hybrid chip card reader and WU000637-0001 gasket.|https://spatco.com/shop/products/wayne-w2894103-002-p95-secure-card-reader-service-kit|https://spatco.com//assets/products/images/W2894103-002.jpeg|in stock|1201.6 USD|6 lb|Wayne||new|no| TSP-KI2|TSP-KI2|Franklin Fueling TSP-KI2 Interstitial Riser Cap|Installation kit for installing the DIS, EIS or ULS sensors in dry interstitial spaces with 2 (5 cm) riser pipe openings. The cap is compression-fit into the riser pipe via the use of a lever.|https://spatco.com/shop/products/franklin-fueling-tsp-ki2-interstitial-riser-cap|https://spatco.com//assets/products/images/TSP-KI2.jpg|in stock|185 USD|4 lb|Franklin Fueling||new|no| TS-LSU500|TS-LSU500|Incon TS-LSU500 Electronic Line Leak Detector Sensor|Replacement sensor. For use with Franklin Fueling EVO™ 600/6000.|https://spatco.com/shop/products/incon-ts-lsu500-electronic-line-leak-detector-sensor|https://spatco.com//assets/products/images/TS-LSU500_3.jpg|in stock|993 USD|5 lb|Incon||new|no| TBA-0200|TBA-0200|OPW TBA-0200 2-Inch Test Boot with Air Stem|FlexWorks Test Boots  are used to isolate and air-test the interstitial space between the primary and secondary pipe. One test boot is required for each pipe end.|https://spatco.com/shop/products/opw-tba-0200-2-inch-test-boot-with-air-stem|https://spatco.com//assets/products/images/TBA-0200_2025-10-03-133612_spvt.jpg|in stock|31.59 USD|2 lb|OPW||new|no| T20005-G4R|T20005-G4R|Gilbarco T20005-G4R Rebuilt Pump Controller Board for Advantage Dispenser|This is a rebuilt replacement pump controller board for the Gilbarco Advantage dispenser.|https://spatco.com/shop/products/gilbarco-t20005-g4r-rebuilt-pump-controller-board-for-advantage-dispensers|https://spatco.com//assets/products/images/T20005-G4R.jpg|in stock|295 USD|5 lb|Gilbarco||new|no| T19501-G2R|T19501-G2R|Gilbarco T19501-G2R Rebuilt Monochrome CPU Board|Monochrome CPU board to be used with Gilbarco Encore and Advantage dispensers.|https://spatco.com/shop/products/gilbarco-t19501-g2r-rebuilt-monochrome-cpu-board|https://spatco.com//assets/products/images/T19501-G2R.jpg|in stock|195 USD|5 lb|Gilbarco||new|no| STP-CBS|STP-CBS|FE Petro STP-CBS Standard Control Box|The FE PETRO® standard single-phase control box latches line power to the submersible when the relay is energized by a dispenser signal. Compatible with FE PETRO® and competitive makes of single-phase, fixed speed submersible turbines up to 2 hp.|https://spatco.com/shop/products/fe-petro-stp-cbs-standard-control-box|https://spatco.com//assets/products/images/STP-CBS.jpg|in stock|255 USD|10 lb|FE Petro||new|no| SS02|SS02|Gasoila SS02 Soft-Set Thread Sealant with PTFE|The Gasoila SS02 is a soft-set thread sealant with PTFE. It provides a positive seal on pipe thread, joints, fittings, hoses, nozzles, LPG cylinders, pump assemblies, motors, oil burners, hydraulics, compressors, engines, housings, plugs, fuel lines, couplings and more.|https://spatco.com/shop/products/gasoila-ss02-soft-set-thread-sealant-with-ptfe|https://spatco.com//assets/products/images/SS02.jpg|in stock|4.82 USD|1 lb|Gasoila Chemicals||new|no| SMA-2020|SMA-2020|OPW SMA-2020 FlexWorks 2-Inch Adaptor (2 NPSH to 2 Male NPT)|The OPW SMA-2020 FlexWorks 2-Inch Adaptor is used to interconnect flexible piping.|https://spatco.com/shop/products/opw-sma-2020-flexworks-2-inch-adaptor-2-npsh-to-2-male-npt|https://spatco.com//assets/products/images/SMA-2020.jpg|in stock|114.4 USD|2.7 lb|OPW||new|no| SMA-1010|SMA-1010|OPW SMA-1010 FlexWorks Swedge-On 1-Inch Adaptor (1 Male NPT to 1 Female NPT)|The OPW SMA-1010 FlexWorks Swedge-On 1-Inch Adaptor is used to interconnect flexible piping.|https://spatco.com/shop/products/opw-sma-1010-flexworks-swedge-on-1-inch-adaptor-1-male-npt-to-1-female-npt|https://spatco.com//assets/products/images/SMA-1010.jpg|in stock|57.01 USD|2 lb|OPW||new|no| SBC-2100|SBC-2100|OPW SBC-2100 Swivel Bolt-On Coupling, 1-Inch Male NPT|The SBC Swivel Bolt-On Coupling features a double wall design that eliminates the need to trim back the secondary jacket. The need for rubber test boots is eliminated. Permanent access to the pipes interstice allows for future integrity testing or continuous interstitial monitoring. Swivel Bolt-On Couplings have an integral interstitial fluid path and a threaded access port located directly on the coupling collar. This state of the art method of connection is a cost effective solution that allows rapid system integrity testing as well as interstitial monitoring capability, at installation and in the future to accommodate new monitoring regulations.|https://spatco.com/shop/products/opw-sbc-2100-swivel-bolt-on-coupling-1-inch-male-npt|https://spatco.com//assets/products/images/SBC-2100.jpg|in stock|223.99 USD|3 lb|OPW||new|no| PMA-VS4|PMA-VS4|Franklin Fueling PMA-VS4 4HP Variable Speed Pump Motor Assembly|Franklin Fueling (FE Petro) 400276908 PMA-MVS4 4HP Variable Speed Pump Motor Assembly.|https://spatco.com/shop/products/franklin-fueling-pma-vs4-4hp-variable-speed-pump-motor-assembly|https://spatco.com//assets/products/images/PMA-VS4.jpg|in stock|1881 USD|90 lb|Franklin Fueling||new|no| PMA-MVS4|PMA-MVS4|Franklin Fueling PMA-MVS4 4HP Variable Speed Pump Motor Assembly with MagShell® (25 long)|Franklin Fueling (FE Petro) 402493908 PMA-MVS4 4HP Variable Speed Pump Motor Assembly.|https://spatco.com/shop/products/franklin-fueling-pma-mvs4-4hp-variable-speed-pump-motor-assembly-with-magshell-25-long|https://spatco.com//assets/products/images/PMA-MVS4.jpg|in stock|1881 USD|90 lb|Franklin Fueling||new|no| PMA-150|PMA-150|Franklin Fueling PMA-150 1 1/2 HP Pump Motor Assembly for 4-Inch. Submersible Turbine Pump|FE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping. FE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products. If ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.|https://spatco.com/shop/products/franklin-fueling-pma-150-1-1-2-hp-pump-motor-assembly-for-4-inch-submersible-turbine-pump|https://spatco.com//assets/products/images/PMA-150.jpg|in stock|1417 USD|38 lb|Franklin Fueling||new|no| M16183A002|M16183A002|Gilbarco M16183A002 Omnia with DCM3 Assembly|Encore 900 Omnia interface board with bracket for use in Encore 700S dispenser. Replaces p/n M16181A002.|https://spatco.com/shop/products/gilbarco-m16183a002-omnia-with-dcm3-assembly|https://spatco.com//assets/products/images/M16183A002.jpg|in stock|2414.86 USD|6 lb|Gilbarco||new|no| M15550K901|M15550K901|Gilbarco M15550K901 Alpha Numeric Universal Payment Module (UPM)|Gilbarco M15550K901 Alpha Numeric Universal Payment Module (UPM) programmed, North America, no key. Compatible with Encore 300, 500, 500S, and 700S dispensers. Designed to support both numeric and text input, this UPM delivers secure PIN entry and smooth customer interactions at the pump.|https://spatco.com/shop/products/gilbarco-m15550k901-alpha-numeric-universal-payment-module-upm|https://spatco.com//assets/products/images/M15550K901.png|in stock|2816.72 USD|8 lb|Gilbarco||new|no| M15182B002 |M15182B002 |Gilbarco M15182B002 Combined Pulser for Encore 500/500S/700S|Combined pulser for Gilbarco Encore 500, 500S, and 700S dispensers. The combined pulser converts mechanical motion from the meter into precise electronic pulses for transaction processing, ensuring accuracy in volume measurement and fuel delivery tracking. Replaces p/n M15182B001.|https://spatco.com/shop/products/gilbarco-m15182b002-combined-pulser-for-encore-500-500s-700s|https://spatco.com//assets/products/images/M15182B002.png|in stock|632.34 USD|8 lb|Gilbarco||new|no| M14100A001|M14100A001|Gilbarco M14100A001 DEF Temperature Control Board|Replacement Gilbarco DEF temperature control board.|https://spatco.com/shop/products/gilbarco-m14100a001-def-temperature-control-board|https://spatco.com//assets/products/images/M14100A001.jpg|in stock|301.75 USD|5 lb|Gilbarco||new|no| M12803A008R |M12803A008R |Gilbarco M12803A008R Refurbished SP-III Door Node 5, 6-Digit Card Reader with SP-II Support|Refurbished SP-III Door Node 5 with Card Reader and SP-II Support. Supports secure card acceptance and door control. Optional core exchange. Refund of $510.78 with return of core.|https://spatco.com/shop/products/gilbarco-m12803a008r-refurbished-sp-iii-door-node-5-6-digit-card-reader-with-sp-ii-support|https://spatco.com//assets/products/images/M12803A008R.jpg|in stock|1007.49 USD|7 lb|Gilbarco||new|no| M12287B001|M12287B001|Gilbarco M12287B001 ADA Keypad for Encore 700S|Gilbarco ADA Keypad. Used With ENE0611G, ENE0614G And ENE0615G Series Graphics.|https://spatco.com/shop/products/gilbarco-m12287b001-ada-keypad-for-encore-700s|https://spatco.com//assets/products/images/M12287B001.png|in stock|44.3 USD|3 lb|Gilbarco||new|no| M11930K001|M11930K001|Gilbarco M11930K001 Replacement Flexpay Control Board Kit|Replacement Flexpay control board kit for use in the following dispensers:  Encore 300, Encore 500, Encore 500S, and Encore 700S. |https://spatco.com/shop/products/gilbarco-m11930k001-replacement-flexpay-control-board-kit|https://spatco.com//assets/products/images/M11930K001_2025-09-23-181742_vhbw.jpg|in stock|4072.68 USD|6 lb|Gilbarco||new|no| M10473A001|M10473A001|Gilbarco M10473A001 Encore DEF Nozzle Boot|Gilbarco M10473A001 Encore DEF nozzle boot.  For units built after 2012.|https://spatco.com/shop/products/gilbarco-m10473a001-encore-def-nozzle-boot|https://spatco.com//assets/products/images/M10473A001.png|in stock|204.61 USD|5 lb|Gilbarco|Black|new|no| M07555A004R|M07555A004R|Gilbarco M07555A004R Refurbished Encore Power Supply Assembly|This refurbished M07555A004R Gilbarco Encore Power Supply Assembly (IP-130-U24) replaces the M04104A001, M07555A001, M07555A002, and M07555A003 Power Supply Assembly. It also allows the removal of the auxiliary power supply to make the unit compatible with Insite360™ remote power cycle.  Optional core exchange. Refund of $583.33 with return of core. The core must also be exactly like-for-like and must be in a “repairable condition” meaning there are no signs of obvious lightning damage or component damage that is beyond repair.|https://spatco.com/shop/products/gilbarco-m07555a004r-refurbished-encore-power-supply-assembly|https://spatco.com//assets/products/images/M07555A004R.png|in stock|1324.51 USD|8 lb|Gilbarco||new|no| M07333K003|M07333K003|Gilbarco M07333K003 Heater/Fan Install Kit|The M07333K003 Kit is used to replace faulty Fan/Heater assembly in Encore 300/The Advantage Series [with FlexPay EMV (Canada Only)]/Atlas DEF and Encore S/Encore 500/700/DEF units. The Heater/Fan assembly provides up to 750 Watts of heat to the dispenser at low temperature. At low temperature, the heater turns off when the Submersible Turbine Pumps (STPs) are activated. This ensures that the maximum current draw of the dispenser remains the same.  At high temperature, the fan will turn on to circulate air. There is a Light Emitting Diode (LED) indicator for the heater and one for the fan, indicating that the controller board is trying to turn them on.  |https://spatco.com/shop/products/gilbarco-m07333k003-heater-fan-install-kit|https://spatco.com//assets/products/images/M07333K001.jpg|in stock|446.6 USD|18 lb|Gilbarco||new|no| M07333K001|M07333K001|Gilbarco M07333K001 Heater/Fan Install Kit|The M07333K001 Kit is used to install 110/120V Fan/Heater assembly in Encore 300/The Advantage Series [with FlexPay EMV (Canada Only)] and Encore S/Encore 500/700 units.  The Heater/Fan assembly provides up to 750 Watts of heat to the dispenser at low temperature. At low temperature, the heater turns off when the Submersible Turbine Pumps (STPs) are activated. This ensures that the maximum current draw of the dispenser remains the same.  At high temperature, the fan will turn on to circulate air. There is a Light Emitting Diode (LED) indicator for the heater and one for the fan, indicating that the controller board is trying to turn them on.  |https://spatco.com/shop/products/gilbarco-m07333k001-heater-fan-install-kit|https://spatco.com//assets/products/images/M07333K001.jpg|in stock|1250.16 USD|18 lb|Gilbarco||new|no| M06194A001R|M06194A001R|Gilbarco Refurbished M06194A001R 3-Grade Single-PPU with Bracket|3-Grade Single-PPU PCB and Panel Assembly Board for use in Gilbarco Encore 500 S Dispenser. Optional core exchange. Refund of $220.58 with return of core. |https://spatco.com/shop/products/gilbarco-refurbished-m06194a001r-3-grade-single-ppu-with-bracket|https://spatco.com//assets/products/images/M06194A001R_2.jpg|in stock|634.71 USD|8 lb|Gilbarco||new|no| M05912A001 |M05912A001 |Gilbarco M05912A001 Nozzle Boot Assembly for Encore 500S Dispenser|Nozzle boot assembly used on Gilbarco Encore 500 S series dispensers.|https://spatco.com/shop/products/gilbarco-m05912a001-nozzle-boot-assembly-for-encore-500s-dispenser|https://spatco.com//assets/products/images/M05912A001.png|in stock|85.92 USD|5 lb|Gilbarco||new|no| M04329A001|M04329A001|Gilbarco M04329A001 Single PPU BOARD|PPU board with LED backlight for use with Encore 500 and Encore 500S. Optional core exchange. Refund of $83.33 with return of core.|https://spatco.com/shop/products/gilbarco-m04329a001-single-ppu-board|https://spatco.com//assets/products/images/M04329A001.jpg|in stock|224.75 USD|4 lb|Gilbarco||new|no| M01598A001R|M01598A001R|Gilbarco M01598A001R Refurbished Pump Controller Board for Encore 300|Refurbished Pump Controller Board for Gilbarco Encore 300. Controls motor and dispenser functions. Fully tested and functioning. Refund of $96.25 with return of core.|https://spatco.com/shop/products/gilbarco-m01598a001r-refurbished-pump-controller-board-for-encore-300|https://spatco.com//assets/products/images/M01598A001R.webp|in stock|200 USD|5 lb|Gilbarco||new|no| M00317A003R|M00317A003R|Gilbarco M00317A003R Refurbished Printer Module for Encore 300|Refurbished Printer Module for Gilbarco Encore 300. Prints customer receipts at the dispenser. Fully tested and functioning.|https://spatco.com/shop/products/gilbarco-m00317a003r-refurbished-printer-module-for-encore-300|https://spatco.com//assets/products/images/M00317A003R.png|in stock|286.67 USD|0 lb|Gilbarco||new|no| KKH2OMOD|KKH2OMOD|Kolor Kut KKH2OMOD Modified Water Finding Paste, 2.5 oz.|Kolor Kut Modified Water Finding Paste changes from dark brown to bright red in contact with water. Phase-separated alcohol solutions with as little as 6% water will turn the paste yellow. Kolor Kut modified water finding paste has been designed for use in methanol, ethanol enriched fuel systems (B7, B10, XTL, E5, E10, E20). Alcohols are soluble in fuels in all proportions when they are water-free but relatively small amounts of water can cause separation of alcohol from the fuel. The mixture settling to the bottom of the storage tank contains a high concentration of alcohol and cannot be detected by most water detection pastes.|https://spatco.com/shop/products/kolor-kut-kkh2omod-modified-water-finding-paste-2-5-oz|https://spatco.com//assets/products/images/KKH2OMOD.jpg|in stock|8.75 USD|1 lb|Kolor Kut||new|no| IA-ESOCA/T|IA-ESOCA/T|Franklin Fueling IA-ESOCA/T Yellow Emergency Stop Operator|Emergency Stop Operators provide immediate shut off of dispensers and submersible pumps for compliance with National Electrical Code requirements. Twist to release with lift-up clear cover and alarm.|https://spatco.com/shop/products/franklin-fueling-ia-esoca-t-yellow-emergency-stop-operator|https://spatco.com//assets/products/images/IA-ESOCA-T.jpg|in stock|270 USD|5 lb|Franklin Fueling|Yellow|new|no| HEF-0751|HEF-0751|OPW HEF-0751 1/2, 3/4, and 1 Conduit Hybrid Entry Fitting|FlexWorks Hybrid Entry Fittings are designed to seal the sump penetration. These entry fittings bring the best of both worlds from the robust and popular REF and legacy DEB lines of products. The outer buried half features a hard-shell exterior to weather the elements and abuse of the underground environment, the same as you find on an REF. The inner accessible half provides the flexibility of the DEB. The sealing redundancy throughout the fitting provides maximum containment and unmatched protection from water intrusion. Hole Saw Dimension: 2.5 / 6.35cm|https://spatco.com/shop/products/opw-hef-0751-1-2-3-4-and-1-conduit-hybrid-entry-fitting|https://spatco.com//assets/products/images/HEF-0751.jpg|in stock|93.41 USD|4 lb|OPW||new|no| H04150M|H04150M|OPW H04150M Gasket For 633T Series Top-Seal Adaptors|This is a replacement gasket for OPW 633T Series Top-Seal Adaptors. Nitrile® Gasket: 3x 4, 76mm x 102mm.|https://spatco.com/shop/products/opw-h04150m-gasket-for-633t-series-top-seal-adaptors|https://spatco.com//assets/products/images/H04150M.jpg|in stock|4.67 USD|1 lb|OPW||new|no| GE08|GE08|Gasoila Chemicals GE08 8-Ounce Gasoila E-Seal Thread Sealant with Brush|• Non-hardening, non-toxic, opaque, dark green paste designed specifically for ethanol blended gasoline including E10 and E85 (for 100% ethanol or 100% methanol applications - use Gasoila 100).• Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, pump assemblies, oil burners, hydraulics, bolts, compressors, engines, motors, fuel lines and couplings.• For use on brass, copper, stainless steel, aluminum, black pipe, tin and galvanized pipe.• Excellent resistance to gasoline, ethanol blended gasoline such as E10 and E85, petroleum solvents, kerosene diesel oil, BioDiesel propane, jet fuels, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam and potable water.• NOT for use on oxygen.|https://spatco.com/shop/products/gasoila-chemicals-ge08-8-ounce-gasoila-e-seal-thread-sealant-with-brush|https://spatco.com//assets/products/images/GE08.png|in stock|25.04 USD|1 lb|Gasoila Chemicals||new|no| FSMM120200|FSMM120200|Hose Master FSMM120200 2-Inch, Male x Male, 12-Inch Long FireShield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s unique process makes the difference by minimizing residual stress points created in the hose during the manufacturing process. Hose Master’s proprietary tube seam weld technology resists aromatic vapor permeation and Hose Master’s precise ASME certified welders follow specified procedures to insure the strongest fitting attachments.|https://spatco.com/shop/products/hose-master-fsmm120200-2-inch-male-x-male-12-inch-long-fireshield-flex-connector|https://spatco.com//assets/products/images/FSMM120075.png|in stock|146.52 USD|1.5 lb|Hose Master||new|no| FSMM120075|FSMM120075|Hose Master FSMM120075 3/4-Inch, Male x Male, 12-Inch Long FireShield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s unique process makes the difference by minimizing residual stress points created in the hose during the manufacturing process. Hose Master’s proprietary tube seam weld technology resists aromatic vapor permeation and Hose Master’s precise ASME certified welders follow specified procedures to insure the strongest fitting attachments.|https://spatco.com/shop/products/hose-master-fsmm120075-3-4-inch-male-x-3-4-inch-male-12-inch-long-fireshield-flex-connector|https://spatco.com//assets/products/images/FSMM120075.png|in stock|90.9 USD|1.5 lb|Hose Master||new|no| FMP-ULS|FMP-ULS|Franklin Fueling FMP-ULS Universal Liquid Sump Sensor|Based on float-switch technology and made of chemically-resistant materials, the ULS is a low-cost sensor that can be installed in sumps, dispenser pans, steel double wall tanks or other locations where the presence of liquid indicates a leak has occurred. For use with all EVO™ Series equipment. |https://spatco.com/shop/products/franklin-fueling-fmp-uls-universal-liquid-sump-sensor|https://spatco.com//assets/products/images/FMP-ULS.jpg|in stock|379.33 USD|4.5 lb|Franklin Fueling||new|no| EBF-0200F|EBF-0200F|OPW EBF-0200F 2-Inch Entry Boot Fitting for 2-Inch Rigid Pipe|This FlexWorks entry boot may be installed in the sidewall of a dispenser sump or tank sump. The flexible entry boots permit angled entries up to a 15-degree angle off the perpendicular center line in any direction without leaking or putting undue stress on the pipe or conduit seal.|https://spatco.com/shop/products/opw-ebf-0200f-2-inch-entry-boot-fitting-for-2-inch-rigid-pipe|https://spatco.com//assets/products/images/EBF-0200F.jpg|in stock|91.61 USD|2 lb|OPW||new|no| C86NT|C86NT|Catlow C86NT 3/4 Single-Use Breakaway|The Catlow C86NT 3/4” Single-Use Breakaway is a small and lightweight, minimal flow restriction breakaway designed to be installed between the whip hose and the primary hose. The internal dual poppets close when a drive-off occurs, trapping the fuel inside the hoses at both ends to prevent costly fuel spills and possible damage to the environment.|https://spatco.com/shop/products/catlow-c86nt-3-4-single-use-breakaway|https://spatco.com//assets/products/images/C86NT.png|in stock|44.3 USD|2 lb|Catlow||new|no| C7203/4|C7203/4|Catlow C7203/4 3/4 Male x 3/4 Female Twister Swivel|This Catlow twister swivel raises the level of swivel flexibility with two 360-degree, rotating swivel planes. Special seals protect this heavy-duty swivel from extreme cold weather conditions and are designed for blended fuels. Ethanol Blends up to E25; Biodiesel blends up to B20.|https://spatco.com/shop/products/catlow-c7203-4-3-4-male-x-3-4-female-twister-swivel|https://spatco.com//assets/products/images/C72034.jpg|in stock|33.68 USD|2 lb|Catlow||new|no| C7201X1|C7201X1|Catlow C7201X1 1 Male x 1 Female Twister Swivel|This Catlow twister swivel raises the level of swivel flexibility with two 360-degree, rotating swivel planes. Special seals protect this heavy-duty swivel from extreme cold weather conditions and are designed for blended fuels.|https://spatco.com/shop/products/catlow-c7201x1-1-male-x-1-female-twister-swivel|https://spatco.com//assets/products/images/C7201X1.jpg|in stock|61.73 USD|2 lb|Catlow||new|no| A1004-001GAGE|A1004-001GAGE|Emco A1004-001GAGE Gauge for Double Wall Spill Containment|For use on 5 gallon double wall spill containment in place of a dipstick. The EZ-Gage allows for handsfree, visual inspection of interstitial space, displaying green (OK) or red (TEST) to indicate if liquid removal is required.|https://spatco.com/shop/products/emco-a1004-001gage-gauge-for-double-wall-spill-containment|https://spatco.com//assets/products/images/A1004-001GAGE.jpg|in stock|124.16 USD|0 lb|Emco||new|no| 887225-R01|887225-R01|Wayne 887225-R01 iGEM Pump Relay Board|For use in Wayne Ovation, Ovation2, and Vista Dispensers. Refund of $66.83 with return of core.|https://spatco.com/shop/products/wayne-887225-r01-igem-pump-relay-board|https://spatco.com//assets/products/images/887225-R01.jpg|in stock|151.46 USD|2.6 lb|Wayne||new|no| 859080-002|859080-002|Veeder Root 859080-002 Digital Pressurized Line Leak Detection (DPLLD) with SwiftCheck Valve|The Veeder-Root Digital Pressurized Line Leak Detection (DPLLD) system is designed to meet your everyday compliance needs in a variety of applications. Our patented technology performs precision line leak testing at full pump pressure for 0.1 Gallons Per Hour (GPH)/0.38 Liters Per Hour (LPH) and 0.2 GPH/0.76 LPH, and a pressure decay test to meet the U.S. Environmental Protection Agency (EPA) EPA 3.0 GPH/11.4 LPH test requirements. DPLLD offers flexible testing and digital reporting options, helping to detect catastrophic leaks. When paired with a TLS-450PLUS Automatic Tank Gauge (ATG), customers can monitor up to 1,178 gallons/4,459 liters of fuel line volume.|https://spatco.com/shop/products/veeder-root-859080-002-digital-pressurized-line-leak-detection-dplld-with-swiftcheck-valve|https://spatco.com//assets/products/images/859080-002.jpg|in stock|1572.79 USD|8 lb|Veeder Root||new|no| 857080-111|857080-111|Veeder Root 857080-111 Mag Sump Sensor|Quickly and accurately detect the presence and the amount of water and/or fuel in the containment sump or dispenser pan. Using proven magnetostrictive technology to detect hydrocarbons or water, the Mag Sump Sensor produces fast reaction and recovery times, which eliminates costly and unwarranted service calls and sensor replacements. Its high-grade polymer housing provides enhanced corrosion resistance and fuel compatibility.|https://spatco.com/shop/products/veeder-root-857080-111-mag-sump-sensor|https://spatco.com//assets/products/images/857080-111.png|in stock|1130.74 USD|12 lb|Veeder Root||new|no| 818-0400AGEVR|818-0400AGEVR|Morrison Brothers 818-0400AGEVR Clock Gauge|The Morrison 818 series clock gauges are designed to measure the liquid level in storage tanks up to 12 feet in measurement. The liquid level reading is displayed in feet and inches. CARB EVR Executive Order VR-402; Florida DEP EQ-873.|https://spatco.com/shop/products/morrison-brothers-818-0400agevr-clock-gauge|https://spatco.com//assets/products/images/818-0400AGEVR.png|in stock|585.21 USD| lb|Morrison Bros.||new|no| 724-0200AI|724-0200AI|Morrison Brothers 724-0200AI 2” Leak Indicator|The Leak Indicator is designed to detect leaks in the interstitial space of an aboveground storage tank. The Overfill Indicator provides a high level visual signal indicating that the aboveground storage tank is almost full.|https://spatco.com/shop/products/morrison-brothers-724-0200ai-2-leak-indicator|https://spatco.com//assets/products/images/724-0200AI.png|in stock|92.79 USD|0 lb|Morrison Bros.||new|no| 724-1200AI|724-1200AI|Morrison Brothers 724-1200AI 2” Leak Indicator with Guard|The Leak Indicator is designed to detect leaks in the interstitial space of an aboveground storage tank. The Overfill Indicator provides a high level visual signal indicating that the aboveground storage tank is almost full.|https://spatco.com/shop/products/morrison-brothers-724-0200ai-2-leak-indicator-with-guard|https://spatco.com//assets/products/images/724-1200AI.png|in stock|104.12 USD|0 lb|Morrison Bros.||new|no| KIT700BG|KIT700BG|Fill-Rite KIT700BG Inlet Adapter|Inlet adapter for use with Fill-Rite FR300 and FR700 series pumps. 2 NPT threads.|https://spatco.com/shop/products/fill-rite-kit700bg-inlet-adapter|https://spatco.com//assets/products/images/KIT700BG.jpg|in stock|37.71 USD|1.8 lb|Fill-Rite||new|no| 100-965|100-965|Jomar Valve 100-965 One-Inch, Female NPT, Two-Piece Stainless Steel, Full-Port Ball Valve|Two-piece, full-port, threaded connection, 1000 WOG, stainless-steel ball valve.|https://spatco.com/shop/products/jomar-valve-100-965-one-inch-female-npt-two-piece-stainless-steel-full-port-ball-valve|https://spatco.com//assets/products/images/100-965.jpg|in stock|64.95 USD|8.5 lb|Jomar Valve||new|no| WM011472-0001|WM011472-0001|Wayne - WM011472-0001 Fluorosilicone Dogbone O-Ring, Formed T = 4.0|Fluorosilicone Dogbone O-Ring.|https://spatco.com/shop/products/wayne-wm011472-0001-fluorosilicone-dogbone-o-ring-formed-t-4-0|https://spatco.com//assets/products/images/wm011472-0001.jpg|in stock|33.24 USD|0.75 lb|Wayne||new|no| WM022810|WM022810|Wayne WM022810 Strainer For Xflo Meter|Strainer for Xflo Meter.|https://spatco.com/shop/products/wayne-wm022810-strainer-for-xflo-meter|https://spatco.com//assets/products/images/wm022810.png|in stock|6.26 USD|0.75 lb|Wayne||new|no| 5BBH-0136|5BBH-0136|OPW 5BBH-0136 Replacement Spout Kit with Spout Ring for 7HB Nozzle|The OPW 5BBH-0136 is a spout kit with spout ring used on OPW 7HB nozzle.|https://spatco.com/shop/products/opw-5bbh-0136-replacement-spout-kit-with-spout-ring-for-7hb-nozzle|https://spatco.com//assets/products/images/5BBH-0136.jpg|in stock|79.44 USD|1.5 lb|OPW||new|no| 367-5249|367-5249|Verifone 367-5249 Pinpad Stand for M400|This low-contour swivel stand is designed for the Verifone M400 Pinpad. Features include, smart card clearance, anti-skimming, locking and allows the stand to tilt 90° and Swivel 180° for easy viewing and access.|https://spatco.com/shop/products/verifone-367-5249-pinpad-stand-for-m400|https://spatco.com//assets/products/images/367-5249.jpg|in stock|185.33 USD|3 lb|Verifone|Black|new|no| 354-0300 AV|354-0300 AV|Morrison 354-0300 AV Three-Inch Updraft Vent|Atmospheric updraft vents are installed on the top of storage tank vent pipes on underground and aboveground fuel storage tanks.|https://spatco.com/shop/products/morrison-354-0300av-three-inch-updraft-vent|https://spatco.com//assets/products/images/354-0200AV.png|in stock|61.63 USD|1 lb|Morrison Bros.||new|no| 354-0200AV|354-0200AV|Morrison 354-0200AV Two-Inch Updraft Vent|Atmospheric updraft vents are installed on the top of storage tank vent pipes on underground and aboveground fuel storage tanks.|https://spatco.com/shop/products/morrison-354-0200av-two-inch-updraft-vent|https://spatco.com//assets/products/images/354-0200AV.png|in stock|25.9 USD|1 lb|Morrison Bros.||new|no| 305XPA-1200AK|305XPA-1200AK|Morrison 305XPA-1200AK 4-Inch Cap/Adaptor Combination|Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.|https://spatco.com/shop/products/morrison-305xpa-1200ak-4-inch-cap-adaptor-combination|https://spatco.com//assets/products/images/305XPA-1200AK.jpg|in stock|125.61 USD|5 lb|Morrison Bros.||new|no| 68EZSB-7575|68EZSB-7575|OPW 68EZSB-7575 3/4-Inch Swivel Breakaway Connector|OPW Swivel Breakaways are intended for easy installation at the nozzle inlet. The compact, lightweight designs incorporate a 360° swivel rotation at both the male end and middle joint, with a simple and easily reconnectable breakaway on the opposite end. |https://spatco.com/shop/products/opw-68ezsb-7575-3-4-inch-swivel-breakaway-connector|https://spatco.com//assets/products/images/68EZSB-7575.png|in stock|174.36 USD|2 lb|OPW||new|no| 300-G-BF|300-G-BF|Dixon 300-G-BF 3 Cam and Groove Fuel Gasket|Size: 3 Material: Nitrile Rubber Color Code: 1 green stripe Color: Black|https://spatco.com/shop/products/dixon-300-g-bf-3-cam-and-groove-fuel-gasket|https://spatco.com//assets/products/images/300-G-BF.jpg|in stock|2.33 USD|1 lb|Dixon||new|no| 245M-0400AV|245M-0400AV|Morrison 245M-0400AV 4-Inch Emergency Vent|This lightweight, spring-loaded emergency vent (pressure relief only) is used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire. This vent must be used in conjunction with a “normal vent.” Correct application of this vent requires proper vent size and selection for the tank system in order to meet the specific venting capacity.|https://spatco.com/shop/products/morrison-245m-0400av-emergency-vent|https://spatco.com//assets/products/images/245M-0400AV.jpg|in stock|99.64 USD|6 lb|Morrison Bros.||new|no| 233-4420|233-4420|OPW 233-4420 4-Inch, Tee Extractor Fitting without Cage Assembly|OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4 riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections for attaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor.|https://spatco.com/shop/products/opw-233-4420-4-inch-tee-extractor-fitting-without-cage-assembly|https://spatco.com//assets/products/images/233-4420.png|in stock|138.54 USD|15 lb|OPW||new|no| 23-0055|23-0055|OPW 23-0055 3-Inch, Open Atmospheric Vent|Open Atmospheric Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. These vents are always open to atmosphere and allow any pressure or vacuum in the tank to vent.|https://spatco.com/shop/products/opw-23-0055-3-inch-open-atmospheric-vent|https://spatco.com//assets/products/images/23-0055.png|in stock|70.84 USD|2.5 lb|OPW||new|no| 2104-448|2104-448|Performance Ink 2104-448 30-Micron, Hydrosorb Spin-On Filter|Performance Ink PI-2104-448, 400HS-30 30-Micron Fuel Dispenser Filter removes particulate and detects water.|https://spatco.com/shop/products/performance-ink-2104-448-30-micron-hydrosorb-spin-on-filter|https://spatco.com//assets/products/images/2104-448.jpg|in stock|11.86 USD|2.5 lb|Performance Ink||new|no| 2104-447|2104-447|Performance Ink 2104-447 400-30, 30-Micron Fuel Dispenser Filter| Performance Ink PI-2104-447 30 Micron Particulate Spin-On Fuel Dispenser Filter (400-30) A high-performance solution that keeps your fuel free from contaminants. With its unique cellulose media, this filter efficiently removes particles down to 30 microns, ensuring optimal fuel flow and reducing wear and tear on your equipment. The filter features a 1 1/2-16 thread and can support a flow rate of 25 gpm at 50 psi, with a pressure differential of 25 psid. |https://spatco.com/shop/products/performance-ink-2104-447-400-30-30-micron-fuel-dispenser-filter|https://spatco.com//assets/products/images/2104-447.jpg|in stock|7.87 USD|1.5 lb|Performance Ink||new|no| 200TG-ENG|200TG-ENG|OPW 200TG-ENG AST Mechanical Tank Gauge|The OPW 200TG-ENG Tank Gauge is designed for reading liquid levels in horizontal or vertical aboveground storage tanks. The 200TG Tank Gauge provides an accurate numerical counter readout, eliminating the need for any on-site manual gauging.|https://spatco.com/shop/products/opw-200tg-eng-ast-mechanical-tank-gauge|https://spatco.com//assets/products/images/200TG-ENG.png|in stock|661.74 USD|10 lb|OPW||new|no| 1C-3112D|1C-3112D|OPW 1C-3112D EDGE™ 5-Gallon, Double-Wall Spill Container|The OPW EDGE™ Double Wall Spill Container installs in the same space as single wall buckets. The EDGE™ delivers best-in-class features that significantly improve reliability, installation, testing and serviceability-ease. The EDGE™ exceeds the performance levels of all other double wall spill containers.|https://spatco.com/shop/products/opw-1c-3112d-edge-5-gallon-double-wall-spill-container|https://spatco.com//assets/products/images/1C-3112D.png|in stock|1101.83 USD|130 lb|OPW||new|no| 1C-2100-PEVR|1C-2100-PEVR|OPW 1C-2100-PEVR 5-Gallon, Thread-On, Duratuff II Composite Base with Plug, Spill Container|The OPW Thread-On 1C-2100-PEVR Spill-Container is certified for installation on OPW Phase I EVR Systems. This Vapor Return Spill-Container features a permanent plug in the drain port as per EVR requirements. This spill container has a Duratuff® II Composite base with a 5-gallon bucket, and a cast-iron cover. The FSA-400 Threaded Riser Face Seal Adaptor is installed on the fill pipe below the spill-container to provide a true sealing surface for the drop tube flange on the 61SO and 71SO overfill prevention valve. OPW Spill Containment Manholes are designed to prevent spilled product from entering the soil near the fill and vapor return riser connections on underground storage tanks during normal tank filling operation, or in the event of tank overfill. The spill containers catch spillage to help prevent soil contamination and groundwater pollution. OPW Thread-On Spill Containment Manholes are generally used on new tank or riser pipe installations.|https://spatco.com/shop/products/opw-1c-2100c-pevr-5-gallon-thread-on-cast-iron-base-with-plug-spill-container-2|https://spatco.com//assets/products/images/1C-2100C-PEVR.png|in stock|674.54 USD|55 lb|OPW||new|no| 1C-2100C-PEVR|1C-2100C-PEVR|OPW 1C-2100C-PEVR 5-Gallon, Thread-On, Cast Iron Base with Plug, Spill Container|The OPW Thread-On 1C-2100C-PEVR Spill-Container is certified for installation on OPW Phase I EVR Systems. This Vapor Return Spill-Container features a permanent plug in the drain port as per EVR requirements. This spill container has a cast-iron base with a 5-gallon bucket, and a cast-iron cover. The FSA-400 Threaded Riser Face Seal Adaptor is installed on the fill pipe below the spill-container to provide a true sealing surface for the drop tube flange on the 61SO and 71SO overfill prevention valve. OPW Spill Containment Manholes are designed to prevent spilled product from entering the soil near the fill and vapor return riser connections on underground storage tanks during normal tank filling operation, or in the event of tank overfill. The spill containers catch spillage to help prevent soil contamination and groundwater pollution. OPW Thread-On Spill Containment Manholes are generally used on new tank or riser pipe installations.|https://spatco.com/shop/products/opw-1c-2100c-pevr-5-gallon-thread-on-cast-iron-base-with-plug-spill-container|https://spatco.com//assets/products/images/1C-2100C-PEVR.png|in stock|672.93 USD|55 lb|OPW||new|no| 14HC-0900|14HC-0900|OPW 14HC-0900 Hi-Flo Diesel Nozzle|The OPW 14HC-0900 Hi-Flo nozzle, features innovative patented diesel-capture technology. This innovation is designed to provide a cleaner, greener fueling experience for retail and commercial high speed truck stop lanes.|https://spatco.com/shop/products/opw-14hc-0900-hi-flo-diesel-nozzle|https://spatco.com//assets/products/images/14HC-0900.png|in stock|252.76 USD|4 lb|OPW|Yellow|new|no| 11BP-8500|11BP-8500|OPW 11BP-8500 Blue E10 Unleaded Pressure-Sensing Automatic Prepay Nozzle With 3/4-Inch NPT Inlet|The OPW 11BP Series nozzles are designed and rigorously tested for use in today’s alternative fuels. It’s the first nozzle of its kind to be UL-Listed for use in Ethanol-blended fuels up to 85%. Two-piece hand insulator, aluminum spout, Fillgard splash guard, and two-position hold-open rack.|https://spatco.com/shop/products/opw-11bp-8500-blue-e10-unleaded-pressure-sensing-automatic-prepay-nozzle-with-3-4-inch-npt-inlet|https://spatco.com//assets/products/images/11BP-8500.jpg|in stock|84.72 USD|3.5 lb|OPW|Blue|new|no| 11AF-10FS|11AF-10FS|OPW 11AF-10FS 3/4-Inch, Automatic Farm Nozzle|The OPW 11AF® Nozzle is a sturdy industry-proven standard used primarily for fueling up to 15 gallons per minute. The 11AF® is an automatic dispensing nozzle designed for use in transfer pump. This nozzle should not be used for retail applications, and does not include a No Pressure – No Flow or Interlock Device. For diesel service.|https://spatco.com/shop/products/opw-11af-10fs-3-4-inch-automatic-farm-nozzle|https://spatco.com//assets/products/images/11AF-10FS.jpg|in stock|93.77 USD|4 lb|OPW||new|no| 10RF-2001|10RF-2001|OPW 10RF-2001 Two-Inch, Female NPT, Single Poppet, Emergency Shut-Off Valve|OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at grade level to minimize hazards associated with collision or fire at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, activating poppets and shutting off the flow of fuel. Single-poppet models shut off supply flow. The base of the emergency valve is securely anchored to the concrete dispenser island through a stabilizer bar system within the dispenser sump or pan to ensure proper shearing action. |https://spatco.com/shop/products/opw-10rf-2001-two-inch-female-npt-single-poppet-emergency-shut-off-valve|https://spatco.com//assets/products/images/10RF-2001.png|in stock|307.66 USD|6 lb|OPW||new|no| 100-968 |100-968 |Jomar 100-968 Two-Inch Full-Port Stainless Steel Ball Valve And Stem|Two-piece, full-port, threaded connection, 1000 WOG, stainless-steel ball valve.|https://spatco.com/shop/products/jomar-100-968-two-inch-full-port-stainless-steel-ball-valve-and-stem|https://spatco.com//assets/products/images/100-968.jpg|in stock|204.64 USD|5.6 lb|Jomar Valve||new|no| 100-710|100-710|Jomar 100-710 Three-Inch Full-Port Brass Ball Valve|Three-inch, two-piece, full port, threaded connections, 600 WOG.|https://spatco.com/shop/products/jomar-100-710-three-inch-full-port-brass-ball-valve|https://spatco.com//assets/products/images/100-710.jpg|in stock|347.23 USD|5.6 lb|Jomar Valve||new|no| 012020-180-4|012020-180-4|Ameron 012020-180-4 2-Inch Primary End Cap|Two-inch, fiberglass primary end cap. 2 3/4-inch in length.|https://spatco.com/shop/products/ameron-012020-180-4-2-inch-primary-end-cap|https://spatco.com//assets/products/images/012020-180-4.jpg|in stock|86.82 USD|1.5 lb|Ameron||new|no| 22372108|22372108|Ameron 22372108 2-Inch Fiberglass 90 Degree Primary Elbow|This elbow is used for joining two-inch primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-22372108-2-fiberglass-90-degree-primary-elbow|https://spatco.com//assets/products/images/22372108.jpg|in stock|65.57 USD|1.5 lb|Ameron||new|no| FL7A|FL7A|OPW FL7A Lifting Handle With Foot Pedal For Watertight Covers|Used to more easily lift OPW watertight covers. For use with OPW series FL90/FL100/FL120/FL180 covers.|https://spatco.com/shop/products/opw-fl7a-lifting-handle-with-foot-pedal-for-watertight-covers|https://spatco.com//assets/products/images/FL7A.png|in stock|429.41 USD|12 lb|OPW||new|no| 794380-622|794380-622|Veeder-Root 794380-622 Groundwater Sensor|Groundwater Sensor for 10 to 15 wells. Fulfills local, state and federal electronic groundwater monitoring requirement. Ideal monitoring method for areas with high water table. Not sensitive to background vapors. Long-life, reusable sensing element.|https://spatco.com/shop/products/veeder-root-794380-622-groundwater-sensor|https://spatco.com//assets/products/images/794380-622.png|in stock|959 USD|12 lb|Veeder Root||new|no| 4860|4860|Husky 4860 Truck/High Volume Swivel|1 M x 1 F NPT High Flow Multi-Plane Swivel.|https://spatco.com/shop/products/husky-4860-truck-high-volume-swivel|https://spatco.com//assets/products/images/4860.jpg|in stock|81.19 USD|3 lb|Husky||new|no| A0097-004LP|A0097-004LP|Emco A0097-004LP Low Profile Fill Cap|The A0097-004LP Low Profile Fill Cap is designed for use when there is limited space between the top of the adapter and the spill containment lid. The cap is painted gray.|https://spatco.com/shop/products/emco-a0097-004lp-low-profile-fill-cap|https://spatco.com//assets/products/images/A0097-004LP.png|in stock|77.52 USD|6 lb|Emco||new|no| 7HB-5100|7HB-5100|OPW 7HB-5100 Green Automatic Shut-Off Nozzle without Spout Ring|If you operate a full-service truckstop, refuel your own fleet or manage a cardlock refueling location, the low-cost, long-life and durability of the OPW 7HB-5100 high-flow nozzle can help increase your productivity, sales and profits.|https://spatco.com/shop/products/opw-7hb-5100-green-automatic-shut-off-nozzle-without-spout-ring|https://spatco.com//assets/products/images/7HB-5100.jpg|in stock|148.53 USD|6 lb|OPW||new|no| 2272|2272|Husky 2272 3/4-Inch M NPT x 3/4-Inch F NPT Standard Swivel|Single-plane 90 degree swivel.|https://spatco.com/shop/products/husky-2272-3-4-inch-m-npt-x-3-4-inch-f-npt-standard-swivel|https://spatco.com//assets/products/images/2272.jpg|in stock|37.26 USD|2 lb|Husky||new|no| 10RMT-5842|10RMT-5842|OPW 10RMT-5842 2-Inch Male Emergency Shut-Off Valve Replacement Top|Replacement top for OPW Part Number 10RM-2003.|https://spatco.com/shop/products/opw-10rmt-5842-2-inch-male-emergency-shut-off-valve-replacement-top|https://spatco.com//assets/products/images/10RMT-5842.jpg|in stock|148.89 USD|2 lb|OPW||new|no| 61SA-TOOL|61SA-TOOL|OPW 61SA-TOOL Wrench|The 61SA-TOOL is a wrench ­designed to thread on the 61SA Fill and 61VSA Vapor Adaptors. The OPW 61SA-TOOL Adaptor installation tool is required to insure proper installation of OPW rotatable swivel adaptors, thread-on spill containers, fill and vapor adaptors,TC-400 torque cap for pipe nipples and threaded riser adaptors as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing.|https://spatco.com/shop/products/opw-61sa-tool-wrench|https://spatco.com//assets/products/images/61SA-TOOL.png|in stock|666.22 USD|15 lb|OPW||new|no| 104A-0800|104A-0800|OPW 104A-0800 8-Inch Steel Manhole with Cast Iron Lid|Heavily ribbed cast iron cover and body ring ensures maximum load bearing capacity on cast iron manholes and fill boxes. This manhole is ideal for connecting underground tank lines directly to the surface without sump enclosures. |https://spatco.com/shop/products/opw-104a-0800-8-inch-steel-manhole-with-cast-iron-lid|https://spatco.com//assets/products/images/104A-1200.jpg|in stock|102.93 USD|20 lb|OPW||new|no| VAR75|VAR75|OPW VAR75 Converter Vac-Assist to 3/4-Inch NPT|Converts vacuum-assist nozzle to a conventional hose or a vacuum-assist dispenser for use with a conventional hose.|https://spatco.com/shop/products/opw-var75-converter-vac-assist-to-3-4-inch-npt|https://spatco.com//assets/products/images/VAR75.png|in stock|38.06 USD|2 lb|OPW||new|no| 21GU-H17G|21GU-H17G|OPW 21GU-H17G 17.4-Foot DEF Hose Assembly|Designed with integral swivel couplings and an anti-kinking sleeve, the 21GU-H17G hose is easy to install and use. This hose meets compatibility testing as specified in ISO 22241 so that you can rest assured that your hose will last. For use with Gilbarco® Retail and Wayne® Dispensers.|https://spatco.com/shop/products/opw-21gu-h17g-17-4-foot-def-hose-assembly|https://spatco.com//assets/products/images/21GU-H17G.jpg|in stock|201.53 USD|12 lb|OPW||new|no| 303-1540|303-1540|Universal 303-1540 1-1/2 x 4 Shorty Offset Adaptor|This offset adapter is designed for low height requirements. 1.5 Female NPT, 4 Offset, full-flow unobstructed design, zinc-plated cast iron construction.|https://spatco.com/shop/products/universal-303-1540-1-1-2-x-4-shorty-offset-adaptor|https://spatco.com//assets/products/images/303-1540.jpg|in stock|67.06 USD|4 lb|Universal||new|no| 178-0300AC|178-0300AC|Morrison Brothers 178-0300AC 2-Inch Fill Cap, Brass Body, Iron Cap|Designed for tank filling applications where a tight fill connection is not required. Adaptor permanently threads onto riser pipe of fill nipple, cap threads onto adaptor.|https://spatco.com/shop/products/morrison-brothers-178-0300ac-2-inch-fill-cap-brass-body-iron-cap|https://spatco.com//assets/products/images/178-0300AC.jpg|in stock|53.86 USD|3 lb|Morrison Bros.||new|no| 8331|8331|Husky 8331 1-Inch Female x 1-Inch Female Magnetic Reconnectable Breakaway|Husky® Safe-T-Breaks® stop the flow of fuel on both sides of the separation and have passed the demanding UL test requirements on separations without leaking or failing. For Standard Fueling Applications|https://spatco.com/shop/products/husky-8331-1-inch-female-x-1-inch-female-magnetic-reconnectable-breakaway|https://spatco.com//assets/products/images/8331_2.jpg|in stock|106.48 USD|2 lb|Husky||new|no| 68EZR-10RF|68EZR-10RF|OPW 68EZR-10RF 1-Inch Dry Reconnectable Breakaway - Diesel/Biodiesel|68EZR-10RF is UL and ULC listed for use in diesel, and biodiesel blends up to 20% (B20).|https://spatco.com/shop/products/opw-68ezr-10rf-1-inch-dry-reconnectable-breakaway-diesel-biodiesel|https://spatco.com//assets/products/images/68EZR-10RF.jpg|in stock|167.73 USD|2 lb|OPW||new|no| 794380-343|794380-343|Veeder-Root 794380-343 Solid-State Discriminating Interstitial Sensor|The Discriminating Interstitial Sensor for double-wall fiberglass tanks uses solid-state liquid level sensing technology to detects the presence of, and differentiates between, hydrocarbons and other liquids in the interstitial space of the tank. Prevent serious product loss, safety and environmental issues by quickly detecting leaks in fiberglass tanks.|https://spatco.com/shop/products/veeder-root-794380-343-solid-state-discriminating-interstitial-sensor|https://spatco.com//assets/products/images/794380-343.png|in stock|1222 USD|10 lb|Veeder Root||new|no| 794380-304|794380-304|Veeder-Root 794380-304 Single-Point Mini-Hydrostatic Sensor|The Single-Point Mini-Hydrostatic sensor accurately detects fluid level change in the interstice reservoir of a double-wall sump. If a leak occurs in the sump interstice, the brine seeps out of the reservoir triggering a low level alarm. This sensor fits in smaller interstitial spaces and is ideal for detecting brine leaks.|https://spatco.com/shop/products/veeder-root-794380-304-single-point-mini-hydrostatic-sensor|https://spatco.com//assets/products/images/794380-304.png|in stock|686 USD|12 lb|Veeder Root||new|no| M-58|M-58|12-Inch x 8-Inch Aluminum Overfill Alarm Sign|Aluminum sign with red letter on white background. 12 inches wide. 8 inches high. |https://spatco.com/shop/products/12-inch-x-8-inch-aluminum-overfill-alarm-sign|https://spatco.com//assets/products/images/M-58.jpg|in stock|7.14 USD|1 lb|Performance Ink||new|no| 6100-5000|6100-5000|OPW/Pemco 6100-5000 Counterweight Hose Retractor - 92 Inches|POMECO counterweight hose retractors keep excess hose off the ground and out of the way, prolonging hose life and reducing potential hazards|https://spatco.com/shop/products/opw-pemco-6100-5000-counterweight-hose-retractor-92-inches|https://spatco.com//assets/products/images/6100-5000.jpg|in stock|628.07 USD|40 lb|OPW||new|no| 50002|50002|Cim-Tek 50002 Cast Iron Adaptor|For use with 200, 250, 260, and 300 Series filters.|https://spatco.com/shop/products/cim-tek-50002-cast-iron-adaptor|https://spatco.com//assets/products/images/50002.png|in stock|15.56 USD|3 lb|Central Illinois||new|no| 50032|50032|Cim-Tek 50032 Aluminum Petroleum Adaptor|For use with Cim-Tek Petroleum Filter Series: 400, 450, and 475.|https://spatco.com/shop/products/cim-tek-50032-aluminum-petroleum-adaptor|https://spatco.com//assets/products/images/50032.png|in stock|24.16 USD|1.5 lb|Central Illinois||new|no| 25-0120|25-0120|OPW 1-1/2-Inch Electroless Nickel-Plated Hose Swivel|Designed for use with fuel oil nozzles at inlet only. This OPW part provides 360° swivel action. The full-circle swivel reduces the physical strain of aligning the nozzle with the fill pipe. |https://spatco.com/shop/products/opw-1-1-2-inch-electroless-nickel-plated-hose-swivel|https://spatco.com//assets/products/images/25-0120.jpg|in stock|175.99 USD|1.5 lb|OPW||new|no| P110-42G|P110-42G|OPW P110-42G 42 Manhole Gasket|This 42 gasket is used for Multi-Port Spill Containment Manholes.|https://spatco.com/shop/products/opw-p110-42g-42-manhole-gasket|https://spatco.com//assets/products/images/P110-42G.jpg|in stock|88.64 USD|4 lb|OPW||new|no| WM040824-0011|WM040824-0011|Wayne WM040824-0011 Single Helix Display Module|Single Helix Display Module Upd 5 MM x 12.7 MM Tn Neg 12.|https://spatco.com/shop/products/wayne-wm040824-0011-single-helix-display-module|https://spatco.com//assets/products/images/WM040824-0011.jpg|in stock|57.22 USD|4 lb|Wayne||new|no| IRF 4B1.4|IRF 4B1.4|Icon Containment Solutions IRF 4B1.4 SplitRepair Flange Fitting Kit|The ICON IRF 10B4.5 10 bolt split flange fitting is designed to provide maximum strength and durability, making it ideal for use in hydraulics, pneumatics, pumps, and plumbing applications. |https://spatco.com/shop/products/icon-containment-solutions-irf-4b1-4-splitrepair-flange-fitting-kit|https://spatco.com//assets/products/images/IRF-4B1.4.jpg|in stock|255.36 USD|2 lb|Icon Containment Solutions||new|no| ORRAA200CL|ORRAA200CL|ORR Safety ORRAA200CL Scratch-Resistant Safety Glasses|Super-lightweight providing a near total eye orbital seal and features exclusive Duramass scratch-resistant lens coating and spatula temples.|https://spatco.com/shop/products/orr-safety-orraa200cl-scratch-resistant-safety-glasses|https://spatco.com//assets/products/images/ORRAA200CL.jpg|in stock|2.6 USD|1.5 lb|ORR Safety||new|no| M12893K001R|M12893K001R|Gilbarco M12893K001R Single PPU Display with Gasket, Refurbished|Refurbished Gilbarco Single PPU Display with Gasket for the Encore S Dispenser built after November 2012. Includes standard product warranty. |https://spatco.com/shop/products/gilbarco-m12893k001r-single-ppu-display-with-gasket-refurbished|https://spatco.com//assets/products/images/M12893K001.jpg|in stock|246.65 USD|3 lb|Gilbarco||new|no| M14330A001|M14330A001|Gilbarco M14330A001 FlexPay IV UX300 EMV Card Reader|The Gilbarco M14330A001 FlexPay IV UX300 EMV Card Reader is compatible with the 300, 500, 500S, and 700S series fuel dispensers.|https://spatco.com/shop/products/gilbarco-m14330a001-flexpay-iv-ux300-emv-card-reader|https://spatco.com//assets/products/images/M14330A001.png|in stock|1621.92 USD|4 lb|Gilbarco||new|no| MAT330-100|MAT330-100|Universal MAT330 Standard Weight, 15 x 18, Gray, Sorbent Pads - 100 Count|Quickly soak up oil, water, coolants and other spills. Sorption/Gal.: 22|https://spatco.com/shop/products/universal-mat330-standard-weight-15-x-18-gray-sorbent-pads-100-count|https://spatco.com//assets/products/images/MAT330.png|in stock|74 USD|7 lb|Universal||new|no| 000-001290-|000-001290-|Wayne 000-001290- Key for Vista Series Dispensers|Wayne key for Vista series dispensers. |https://spatco.com/shop/products/wayne-000-001290-key-for-vista-series-dispensers|https://spatco.com//assets/products/images/000-001290.jpg|in stock|11.64 USD|1 lb|Wayne||new|no| TW90|TW90|Tub O Towels TW90 Heavy-Duty 10 x 12 Size Multi-Surface Cleaning Wipes, 90 Count Per Canister|Removes heavy stains others wont including: grease, tar, ink, paint, permanent marker, wax, scuffs, lip stick, nail polish, food and drinks, pet stains and more. These moist towels are gentle on hands and skin. Wipes contain aloe, Vitamin E and lanolin to protect your hands and leave them clean and soft. Our heavy duty cleaning wipes do not contain harmful ingredients. Tub O Towels can be used as automotive and car cleaning wipes, for the office, boating, and RVs, and around the home.|https://spatco.com/shop/products/tub-o-towels-tw90-heavy-duty-10-x-12-size-multi-surface-cleaning-wipes-90-count-per-canister|https://spatco.com//assets/products/images/TW90.jpg|in stock|17.79 USD|3 lb|Federal Process||new|no| 179M-0100AC|179M-0100AC|Morrison 179M-0100AC Two-Inch, Aluminum, Male-Thread Hinged-Style Fill Cap|Designed for tank filling applications where a tight fill connection is not required. Threaded body installs onto riser pipe or directly into tank bung. • Easy to open and close hinged operation• Positive stop to prevent cover from contacting tank• Lockable with a padlock• Integrated venting when closed Construction Details • Aluminum body• Aluminum cap• Zinc plated steel hinge pin|https://spatco.com/shop/products/morrison-179m-0100ac-two-inch-aluminum-male-thread-hinged-style-fill-cap|https://spatco.com//assets/products/images/179M-0100AC.jpg|in stock|20.47 USD|3 lb|Morrison Bros.||new|no| 211064|211064|Wayne 211064 Visi-Gauge Float Gauge|The OPW Fueling Components 1-3100 Series EDGE Visi-Gauge is a float gauge used to indicate when there is fluid in the secondary bucket of the EDGE Double Wall Spill Container. |https://spatco.com/shop/products/wayne-211064-visi-gauge-float-gauge|https://spatco.com//assets/products/images/211064.jpg|in stock|47.35 USD|1.5 lb|Wayne||new|no| WU012889-0002|WU012889-0002|Wayne WU012889-0002 Secure Door Sensor|Replacement secure door sensor for Wayne Helix dispenser.|https://spatco.com/shop/products/wayne-wu012889-0002-secure-door-sensor|https://spatco.com//assets/products/images/WU012889-0002.jpg|in stock|67.51 USD|3 lb|Wayne||new|no| APT-RDEB-150-SC|APT-RDEB-150-SC|APT RDEB-150-SC 1-1/2-Inch Single Wall Rigid Entry Boot|APT ducted rigid entry boots allow you to connect XP double wall flexible pipe to single wall containment sumps with an unsurpassed level of installation ease, while also completely removing exposed rubber from the connection. The interior pipe seal compresses onto the pipe, providing watertight connections between the boot and pipe.|https://spatco.com/shop/products/apt-rdeb-150-sc-1-1-2-inch-single-wall-rigid-entry-boot|https://spatco.com//assets/products/images/APT-RDEB-150-SC_1.jpg|in stock|153.75 USD|3.5 lb|APT||new|no| APT-FEB-050-D|APT-FEB-050-D|APT FEB-050-D Entry Boot for 1/2-Inch Electrical Conduit|APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot.|https://spatco.com/shop/products/apt-feb-050-d-entry-boot-for-1-2-inch-electrical-conduit|https://spatco.com//assets/products/images/FEB-200-D.jpg|in stock|61.33 USD|3.5 lb|APT||new|no| M10030A001|M10030A001|Gilbarco M10030A001 Coriolis Interface Printed Circuit Board Assembly|Replacement Coriolis Interface PCA.|https://spatco.com/shop/products/gilbarco-m10030a001-coriolis-interface-printed-circuit-board-assembly|https://spatco.com//assets/products/images/M10030A001_1.jpg|in stock|311.23 USD|4 lb|Gilbarco||new|no| M01922A001R|M01922A001R|Gilbarco M01922A001R Refurbished Pump Control Node|Refurbished pump control node 2 works with Encore 500 S, Encore 700 S, Eclipse, and Encore 500. Refund of $583.33 with return of core.|https://spatco.com/shop/products/gilbarco-m01922a001r-refurbished-pump-control-node|https://spatco.com//assets/products/images/M01922A001R.jpg|in stock|1041.67 USD|4 lb|Gilbarco||new|no| WM031449|WM031449|Wayne WM031449 Strainer|Replacement strainer for Wayne iMeter.|https://spatco.com/shop/products/wayne-wm031449-strainer|https://spatco.com//assets/products/images/WM031449.jpg|in stock|14.33 USD|1 lb|Wayne||new|no| 600-0180|600-0180|Incon 600-0180 10-foot Quick Disconnect Cable|10-foot quick disconnect cable for LL2 And LL3 series probes.|https://spatco.com/shop/products/incon-600-0180-10-foot-quick-disconnect-cable|https://spatco.com//assets/products/images/600-0180__52714.jpg|in stock|47.9 USD|4 lb|Incon||new|no| WM040824-0007|WM040824-0007|Wayne WM040824-0007 LCD Display|Replacement Wayne Ovation 2 / Helix single-PPU display module. 5 x 12.7 mm.|https://spatco.com/shop/products/wayne-wm040824-0007-lcd-display|https://spatco.com//assets/products/images/WM040824-0007_3.jpg|in stock|39.45 USD|4 lb|Wayne||new|no| EBF-0200|EBF-0200|OPW EBF-0200 2-Inch Entry Boot Fitting for 2-Inch DW FlexWorks Pipe or 2 LCX|FlexWorks Flexible Entry Boots are reliable, safe seals for pipe and conduit entries into underground containment sumps. These entry boots allow for angled pipe entries and have no exposed metal parts to the underground environment. These entry boots are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and access pipe.|https://spatco.com/shop/products/opw-ebf-0200-2-inch-entry-boot-fitting-for-2-inch-dw-flexworks-pipe-or-2-lcx|https://spatco.com//assets/products/images/EBF-200F.jpg|in stock|67.36 USD|2 lb|OPW||new|no| XABXCCMW|XABXCCMW|Cree XABXCCMW Canopy Upgrade Kit for Jet-Philips|For use with Jet-Philips luminaires in existing 2 x 2 box canopies. 21.60″ square, 18 ga. steel. Closeout Pricing - While Supplies Last! |https://spatco.com/shop/products/cree-xabxccmw-canopy-upgrade-kit-for-jet-philips|https://spatco.com//assets/products/images/XABXCCMW.jpg|in stock|19.5 USD|3 lb|Cree Lighting||new|no| 33469204|33469204|Ameron 33469204 3-Inch LCX Containment Coupling|Three-Inch, two-piece, LCX containment coupling. |https://spatco.com/shop/products/ameron-33469204-3-inch-lcx-containment-coupling|https://spatco.com//assets/products/images/33469204.jpg|in stock|135.31 USD|4.5 lb|Ameron||new|no| 331S-0100AV|331S-0100AV|Morrison Bros 331S-0100AV 1.5 Union Check Valve with Screen|Install this check valve inside pipe unions when space is limited.|https://spatco.com/shop/products/morrison-bros-331s-0100av-1-5-union-check-valve-with-screen|https://spatco.com//assets/products/images/331S-0100AV.jpg|in stock|59.3 USD|2.3 lb|Morrison Bros.||new|no| 4145-01|4145-01|Husky 4145-01 Blue Full-Grip Scuff Guard for Husky Nozzles|Scuff guard fits X, XS, and XFS nozzles.|https://spatco.com/shop/products/husky-4145-01-blue-full-grip-scuff-guard-for-husky-nozzles|https://spatco.com//assets/products/images/4145-01.png|in stock|8.82 USD|3 lb|Husky|Blue|new|no| 576011-034|576011-034|Veeder-Root 576011-034 12V Display Lamp Light Bulb|This bulb is used with TLS-350 and TLS-300 consoles.|https://spatco.com/shop/products/veeder-root-576011-034-12v-display-lamp-light-bulb|https://spatco.com//assets/products/images/576011-034.png|in stock|4.46 USD|1 lb|Veeder Root||new|no| 888460-001-011|888460-001-011|Wayne 888460-001-011 Generic Diesel Activation Decal|Replacement generic diesel activation decal for dispenser.|https://spatco.com/shop/products/wayne-888460-001-011-generic-diesel-activation-decal|https://spatco.com//assets/products/images/888460-001-011.jpg|in stock|10.35 USD|1.5 lb|Wayne||new|no| 892645-001-002|892645-001-002|Wayne 892645-001-002 Left-Side Generic SPM Faceplate Overlay|Replacement Generic Faceplate Overlay for left-side, Yes/No/Help/Cancel.|https://spatco.com/shop/products/wayne-892645-001-002-left-side-generic-spm-faceplate-overlay|https://spatco.com//assets/products/images/892645-001-002.jpg|in stock|10.5 USD|2 lb|Wayne||new|no| 892645-001-044|892645-001-044|Wayne 892645-001-044 Left-Side Murphys Oil SPM Faceplate Overlay|Replacement Murphys Oil Faceplate Overlay for left-side, Pay Inside/Debit/No/Help.|https://spatco.com/shop/products/wayne-892645-001-044-left-side-murphys-oil-spm-faceplate-overlay|https://spatco.com//assets/products/images/892645-001-044.jpg|in stock|11.35 USD|2 lb|Wayne||new|no| 892645-002-004|892645-002-004|Wayne 892645-002-004 Right-Side Krogers SPM Faceplate Overlay|Replacement Krogers Faceplate Overlay for Right-side Pay Here/Pay at Window/Gift Card Balance.|https://spatco.com/shop/products/wayne-892645-002-004-right-side-krogers-spm-faceplate-overlay|https://spatco.com//assets/products/images/892645-002-004.jpg|in stock|11.35 USD|2 lb|Wayne||new|no| 892645-002-048|892645-002-048|Wayne 892645-002-048 Right-Side Murphys Oil SPM Faceplate Overlay|Replacement Murphys Oil Faceplate Overlay for Right-side Spanish/Credit/Yes/Cancel.|https://spatco.com/shop/products/wayne-892645-002-048-right-side-murphys-oil-spm-faceplate-overlay|https://spatco.com//assets/products/images/892645-002-048.jpg|in stock|11.35 USD|2 lb|Wayne||new|no| 892645-002-008|892645-002-008|Wayne 892645-002-008 Right-Side BJs SPM Faceplate Overlay|Replacement BJs Faceplate Overlay for Right-side Credit Card/Debit Card/Cash.|https://spatco.com/shop/products/wayne-892645-002-008-right-side-bjs-spm-faceplate-overlay|https://spatco.com//assets/products/images/892645-002-008.jpg|in stock|11.35 USD|2 lb|Wayne||new|no| BPK169-001-01-A|BPK169-001-01-A|Verifone BPK169-001-01-A Battery Pack for Ruby2, Ruby CI and Topaz|Replacement battery pack for Ruby2, Ruby CI and Topaz POS systems. Capacity: 3400mAh/25.16Wh, Volts: 7.40 V, Li-ion battery, Size: 66.60x37.04x20.66mm *This item is not eligible for 2nd Day Air or Next Day Air delivery.|https://spatco.com/shop/products/verifone-bpk169-001-01-a-battery-pack-for-ruby2-ruby-ci-and-topaz|https://spatco.com//assets/products/images/BPK169-001-01-A.jpg|in stock|72.36 USD|3 lb|Verifone||new|no| 159543-04|159543-04|Husky 159543-04 3/4 XS Automatic Shut-off Unleaded Nozzle with Hold Open Clip|Pressure activated, automatic shut-off nozzle for full-service and self-service stations. 3/4 Unleaded Nozzle with Single Notch Hold Open Clip, 1808 Waffle Splash Guard and Flo-Equalizer®|https://spatco.com/shop/products/husky-159543-04-3-4-xs-automatic-shut-off-unleaded-nozzle-with-hold-open-clip|https://spatco.com//assets/products/images/159543-04.jpg|in stock|90.91 USD|5 lb|Husky||new|no| REF-4020|REF-4020|OPW REF-4020 Flexworks Rigid Entry Fitting 4-Inch x 2-Inch|How is this fitting different than other fittings in the industry? OPWs Rigid Entry Fitting (REF) has minimal exposed rubber, yet still accommodates ground movement. The sealing redundancy throughout the fitting provides maximum containment and unmatched protection from water intrusion. |https://spatco.com/shop/products/opw-ref-4020-flexworks-rigid-entry-fitting-4-inch-x-2-inch|https://spatco.com//assets/products/images/REF-4020.png|in stock|129.35 USD|1.5 lb|OPW||new|no| 723V-2203|723V-2203|OPW 723V-2203 Pressure Vacuum Vent|Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent. 2 to 3 WC Pres., 8 WC Vac. Thread-On|https://spatco.com/shop/products/opw-723v-2203-pressure-vacuum-vent|https://spatco.com//assets/products/images/723V-2203.png|in stock|351.68 USD|4 lb|OPW||new|no| W2894033-001-R|W2894033-001-R|Wayne W2894033-001-R Dual SIgned IX-JADE CPU Board for IDPOS|Replacement CPU board. |https://spatco.com/shop/products/wayne-w2894033-001-r-dual-signed-ix-jade-cpu-board-for-idpos|https://spatco.com//assets/products/images/W2894033-001-R.jpg|in stock|1980.68 USD|6 lb|Wayne||new|no| 233-4422|233-4422|OPW 233-4422 4-Inch Top Thread x 2x2-Inch Outlet Thread x 4-Inch Bottom Thread Cross Extractor Fitting|OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4 riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections for attaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor. The OPW 233 Extractor Fittings are designed for use with all OPW 53VML Ball Float Vent Valves that include an extractor cage (the OPW 233 does not include an extractor cage). The 233 Extractor incorporates either single-outlet or multiple-outlet threads. The OPW 233VP Extractor Fitting Test Plug is used on all OPW 233 Series Extractor Fittings. The 233VP incorporates an O-Ring above the threads (on the plug) to isolate the tank from the vent piping systems during a tank test.|https://spatco.com/shop/products/opw-233-4422-4-inch-top-thread-x-2x2-inch-outlet-thread-x-4-inch-bottom-thread-cross-extractor-fitting|https://spatco.com//assets/products/images/233-4422.png|in stock|176.11 USD|17 lb|OPW||new|no| LRK-CLC|LRK-CLC|OPW LRK-CLC Latch Replacement Kit|Replacement kit for CLC-33 Latched Fiberglass Tank Sump.|https://spatco.com/shop/products/opw-lrk-clc-latch-replacement-kit|https://spatco.com//assets/products/images/LRK-CLC.png|in stock|82.85 USD|2 lb|OPW||new|no| 70019|70019|Cim-Tek 70019 Model 800-10, 10 Micron Spin-on Particulate Removal Filter|Compatibility: Gasoline and ethanol blends up to 25%, methanol blends up to 15%, diesel, and ULSD Detection: Removes particulate Specifications: 10 Micron, 1 1/2-16 Thread40 GPM (151 LPM) MAX FLOW50 PSI (3.4 BAR) MAX WORKING PRESSURE25 PSID (1.7 BAR) MAX DIFFERENTIAL PRESSURENOT FOR USE WITH AVIATION APPLICATIONS|https://spatco.com/shop/products/cim-tek-70019-model-800-10-10-micron-spin-on-particulate-removal-filter|https://spatco.com//assets/products/images/70019.png|in stock|23.84 USD|1.7 lb|Central Illinois||new|no| FEB-150-D|FEB-150-D|APT FEB-150-D Flexible Entry Boot For XP-150-D, 50 mm UPP|APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. |https://spatco.com/shop/products/apt-feb-150-d-flexible-entry-boot-for-xp-150-d-50-mm-upp|https://spatco.com//assets/products/images/APT-FEB-150-D.png|in stock|99.82 USD|4 lb|APT||new|no| A0030-124S|A0030-124S|Emco Wheaton A0030-124S Fill Swivel Adapter|The Emco Wheaton A0030-124S Swivel Fill Adapter typically installs on the tank fill riser. The top of the adapter rotates 360 degrees while the base is stationary, preventing accidental loosening from the riser during fuel deliveries. The A0030-124S is field serviceable. Use with the A0097 Fill Cap. Use the Emco Wheaton A0081-001 Adapter Wrench for installation and removal.|https://spatco.com/shop/products/emco-wheaton-a0030-124s-fill-swivel-adapter|https://spatco.com//assets/products/images/A0030-124S.png|in stock|177.48 USD|5 lb|Emco||new|no| 891569-001|891569-001|Wayne 891569-001 Ovation 5-Card Slot PPU Control Board|Replacement control board for Ovation dispenser. |https://spatco.com/shop/products/wayne-891569-001-ovation-5-card-slot-ppu-control-board|https://spatco.com//assets/products/images/891569-001.jpg|in stock|247.25 USD|4 lb|Wayne||new|no| LD2000|LD2000|Vaporless 99 LD2000 Mechanical Line Leak Detector|The 99 LD-2000 is the most requested mechanical line leak detector built today. Not only is the 99 LD-2000 less expensive to own, it is faster and less subject to field and line variables than ever before! Integrated In-Line Check Valve / Pressure Relief A leaking check valve in the turbine, defective submersible pump pressure relief, or a defective bypass valve will allow the line system to depressurize, resetting the leak detector.|https://spatco.com/shop/products/vaporless-99-ld2000-mechanical-line-leak-detector|https://spatco.com//assets/products/images/LD2000.jpg|in stock|488 USD|13 lb|Vaporless||new|no| A1100EVR-056|A1100EVR-056|Emco A1100EVR-056 4-inch x 15-foot Dual Point Overfill Prevention Valve with 85-Inch Top Tube, 107-Inch Bottom Tube|The Emco Wheaton A1100 is a two stage overfill prevention valve for use in both dual point and coaxial drop tubes, gravity feed systems. Easily installs in a new or existing drop tube assembly for economical compliance with EPA regulations. Internal float design to eliminate any chance of the floats getting caught on tank walls or the riser pipe as well as to prevent float damage during installation. Stick diverter and automatic spring loaded poppet retract from the flow path when the valve is not in operation, allowing for stick gauging at any tank level. Compatible with all standard fuels. Phase I EVR E.O. VR-105.|https://spatco.com/shop/products/emco-a1100evr-056-4-inch-x-15-foot-dual-point-overfill-prevention-valve-with-85-inch-top-tube-107-inch-bottom-tube|https://spatco.com//assets/products/images/A1100EVR-056.jpg|in stock|1004.2 USD|32 lb|Emco||new|no| 1C-2200P|1C-2200P|OPW 1C-2200P 5-Gallon, Single-Wall Spill Container with Drain Plug|An affordable, all-accessible, all-replaceable and all-maintainable spill container. Never break concrete again with our new EPA Compliant UST Solution. Single-all, field-replaceble Spill Container with Drain Plug.|https://spatco.com/shop/products/opw-1c-2200p-5-gallon-single-wall-spill-container-with-drain-plug|https://spatco.com//assets/products/images/1C-2200P.png|in stock|688.66 USD|82 lb|OPW||new|no| A1004EVR-317S|A1004EVR-317S|Emco A1004EVR-317S Double-Wall Poly (HDPE) Spill Containment|Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete. Heavy duty, snow-plow resistant ductile iron, powder-coated plow rim. Water-resistant cast iron lid with built-in handle, exclusive triple-wiper seal and vent valve. Meets AASHTO H20 wheel loading.|https://spatco.com/shop/products/emco-a1004evr-317s-double-wall-poly-hdpe-spill-containment|https://spatco.com//assets/products/images/A1004EVR-317S.png|in stock|1177.47 USD|90 lb|Emco|Black|new|no| WU019855-0001|WU019855-0001|Wayne WU019855-0001 Wireless Connect In-Dispenser Subscriber Unit|5 GHz EMV In-Dispenser unit.|https://spatco.com/shop/products/wayne-wu019855-0001-wireless-connect-in-dispenser-subscriber-unit|https://spatco.com//assets/products/images/WU019855-0001.jpg|in stock|944.63 USD|5 lb|Wayne||new|no| W2894113-001-R|W2894113-001-R|Wayne W2894113-001-R Wayne Connect In Dispenser Module IP485/D - Refurbished|Replacement Wayne Connect module, refurbished. |https://spatco.com/shop/products/wayne-w2894113-001-r-wayne-connect-in-dispenser-module-ip485-d-refurbished|https://spatco.com//assets/products/images/W2894113-001-R.png|in stock|1022.6 USD|5 lb|Wayne||new|no| W2893895-002|W2893895-002|Wayne W2893895-002 Secure Card Reader, Chip/Mag Hybrid PCI 5 Service Kit|Card Reader for Wayne Ovation dispenser.|https://spatco.com/shop/products/wayne-w2893895-002-secure-card-reader-chip-mag-hybrid-pci-5-service-kit|https://spatco.com//assets/products/images/W2893895-002.jpg|in stock|1273.08 USD|3 lb|Wayne||new|no| WM028600-0004|WM028600-0004|Wayne WM028600-0004 Xflo Meter|The Xflo fuel meter combines revolutionary engineering and precision design to significantly reduce the amount of fuel that retailers give away through meter drift each year. The meter construction includes iron body with low weight, nickel-plated aluminum dome for use with E85 or gasoline. Does not include the inlet casting, filter or pulser. |https://spatco.com/shop/products/wayne-wm028600-0004-xflo-meter|https://spatco.com//assets/products/images/WM028600-0004.png|in stock|1742.25 USD|40 lb|Wayne||new|no| M13987A004|M13987A004|Gilbarco M13987A004 10.4-Inch FlexPay PCA PIP3 Board|This Peripheral Interface PCB is for 10.4 displays only. This replacement kit is used in the Encore S series fuel dispenser. Replaces M13987A002.|https://spatco.com/shop/products/gilbarco-m13987a004-10-4-inch-flexpay-pca-pip3-board|https://spatco.com//assets/products/images/M13987A002.jpg|in stock|885.58 USD|2 lb|Gilbarco||new|no| M15737A001|M15737A001|Gilbarco M15737A001 Dispenser Communication Module 2 (DCMII) with Bracket|Replacement board for the Encore 500 S and Encore 700 S dispensers.|https://spatco.com/shop/products/gilbarco-m15737a001-dispenser-communication-module-2-dcmii-with-bracket|https://spatco.com//assets/products/images/M15737A001.jpg|in stock|1576.09 USD|4 lb|Gilbarco||new|no| M13888K901|M13888K901|Gilbarco M13888K901 Encore S FlexPay IV Crind Universal Payment Module Kit, North America, No Customer Key|Replaces Gilbarco M13888A901.|https://spatco.com/shop/products/gilbarco-m13888k901-encore-s-flexpay-iv-crind-universal-payment-module-kit-north-america-no-customer-key|https://spatco.com//assets/products/images/M13888K901.png|in stock|2187.74 USD|5 lb|Gilbarco||new|no| 1SC-3112D|1SC-3112D|OPW 1SC-3112D EDGE™ Double-Wall Sealable Cover Spill Container|Designed in collaboration with contractors and end-users, the 1SC-3112D EDGE™ Double-Wall Sealable Cover Spill Container installs in the same space as single wall buckets. The EDGE™ delivers best-in-class features that significantly improve reliability, installation, testing and serviceability-ease. The EDGE™ exceeds the performance levels of all other double wall spill containers. Unbeatable installation easeUses existing riser pipeUnparalleled serviceabilitySuperior qualitySignificantly reduces installation time and labor costs|https://spatco.com/shop/products/opw-1sc-3112d-edge-double-wall-sealable-cover-spill-container|https://spatco.com//assets/products/images/1C-3112D.png|in stock|1513.46 USD|127 lb|OPW||new|no| 846397-103|846397-103|Veeder-Root 846397-103 5-Foot, 4-Inch MAG Plus 0.1 GPH Stainless Steel In-Tank Water-Detection Alternative Fuels Probe with HGP Canister|Certified for inventory control, and in-tank leak detection in alternative fuels. This in-tank probe solution is certified to exceed U.S. EPA performance standards and can accommodate 2 and 4-inch float kits. The MAG Plus is a high-quality long-lasting product. The probe is constructed from stainless steel tubing and includes a high growth polymer (HGP) canister. This 0.1-gallon-per-hour leak detection model includes water detection. This probe can accommodate a wide range of tank shapes and sizes, such as all small rectangular and cylindrical ASTs and USTs that don’t exceed 12’ in diameter. Magnetostrictive sensing technology is an integral component to a complete fuel management system solution. It provides underground storage tank owners visibility to measure and identify multiple liquid readings such as height, liquid temperature, and water. This leak detection probe uses a proven algorithm that supports the increasing demand for reliable in-tank leak detection, assisting operators with their daily, monthly, and yearly compliance management.|https://spatco.com/shop/products/veeder-root-846397-103-5-foot-4-inch-mag-plus-0-1-gph-stainless-steel-in-tank-water-detection-alternative-fuels-probe-with-hgp-canister|https://spatco.com//assets/products/images/846397-107.png|in stock|3203 USD|20 lb|Veeder Root||new|no| 846397-107|846397-107|Veeder-Root 846397-107 8-Foot, MAG Plus 0.1 GPH Stainless Steel In-Tank Water-Detection Alternative Fuels Probe with HGP Canister|Certified for inventory control, and in-tank leak detection in alternative fuels. This in-tank probe solution is certified to exceed U.S. EPA performance standards and can accommodate 2 and 4-inch float kits. The MAG Plus is a high-quality long-lasting product. The probe is constructed from stainless steel tubing and includes a high growth polymer (HGP) canister. This 0.1-gallon-per-hour leak detection model includes water detection. This probe can accommodate a wide range of tank shapes and sizes, such as all small rectangular and cylindrical ASTs and USTs that don’t exceed 12’ in diameter. Magnetostrictive sensing technology is an integral component to a complete fuel management system solution. It provides underground storage tank owners visibility to measure and identify multiple liquid readings such as height, liquid temperature, and water. This leak detection probe uses a proven algorithm that supports the increasing demand for reliable in-tank leak detection, assisting operators with their daily, monthly, and yearly compliance management.|https://spatco.com/shop/products/veeder-root-846397-107-8-foot-mag-plus-0-1-gph-stainless-steel-in-tank-water-detection-alternative-fuels-probe-with-hgp-canister|https://spatco.com//assets/products/images/846397-107.png|in stock|3203 USD|20 lb|Veeder Root||new|no| WU018887-0001|WU018887-0001|Wayne WU018887-0001 SPM To Generic 5-Card Reader Cable Assembly|To be used with Wayne W2893895-002 Hybrid Chip/Mag Secure Card Reader Service Kit if replacing from W2893895-001.|https://spatco.com/shop/products/wayne-wu018887-0001-spm-to-generic-5-card-reader-cable-assembly|https://spatco.com//assets/products/images/WU018887-0001.jpg|in stock|48.52 USD|2 lb|Wayne||new|no| WM040446-0007-R|WM040446-0007-R|Wayne WM040446-0007-R Remote Inlet Meter And Xflo Pulser Dome, Low Double-Sided Fuel Meter - Rebuilt|Wayne Fuel Meter.|https://spatco.com/shop/products/wayne-wm040446-0007-r-remote-inlet-meter-and-x-flo-pulser-dome-low-double-sided-fuel-meter-rebuilt|https://spatco.com//assets/products/images/WM040446-0007-R_2.jpg|in stock|2296.96 USD|40 lb|Wayne||new|no| RLWA-718-10|RLWA-718-10|Royal Filter RLWA-718-10 10-Micron Water-Block Replacement Filter|This filter element can be used for filtering hydraulic fluid, diesel, machining fluids, lubricating oil, coolants, gasoline, process fluids, turbine and compressor lube oils, synthetic lubricants, and many more chemicals.|https://spatco.com/shop/products/royal-filter-rlwa-718-10-10-micron-water-block-replacement-filter|https://spatco.com//assets/products/images/RLWA-718-10.jpg|in stock|83.95 USD|1.5 lb|Royal Filter||new|no| 50109|50109|Cim-Tek 50109 Aluminum Mounting Adaptor For 800 Series|Adaptor for use with 800-series Cim-Tek filters.|https://spatco.com/shop/products/cim-tek-50109-aluminum-mounting-adaptor-for-800-series|https://spatco.com//assets/products/images/50109.jpg|in stock|25.66 USD|1.5 lb|Central Illinois||new|no| 70058|70058|Cim-Tek 70058 Model 300MG-10 10-Micron Spin-on Particulate Filter|Cim-Tek 70058 300MG-10 10-micron fuel dispenser filter is used with gasoline and ethanol blends up to 25%, diesel/ULSD and biodiesel blends up to 20%, 100% biodiesel. Removes particulate.|https://spatco.com/shop/products/cim-tek-70058-model-300mg-10-10-micron-spin-on-particulate-filter|https://spatco.com//assets/products/images/70058.png|in stock|15.26 USD|1.5 lb|Central Illinois||new|no| 40530D-AD|40530D-AD|PetroClear 40530D-AD 30-Micron Dual-Purpose Particulate Removing/Water Sensing Phase Separation Spin-On Filter|PetroClear model 40530D-AD offers efficient 30 micron (nominal) particulate removal, and senses both free and emulsified water in neat gasoline, diesel and biodiesel.|https://spatco.com/shop/products/petroclear-40530d-ad-30-micron-dual-purpose-particulate-removing-water-sensing-phase-separation-spin-on-filter|https://spatco.com//assets/products/images/40530D-AD.jpg|in stock|29.15 USD|1.5 lb|PetroClear||new|no| 70023|70023|Cim-Tek 70023 450MB-10 10-Micron Filter|Cim-Tek 70023 450MB-10 10-micron fuel dispenser filter is used with both straight gasoline and ethanol-blended fuel up to 15%. It is not for use with aviation applications.|https://spatco.com/shop/products/cim-tek-70023-450mb-10-10-micron-filter|https://spatco.com//assets/products/images/70023.png|in stock|17.19 USD|2 lb|Central Illinois||new|no| 60210101|60210101|Ameron 60210101 PSX 20 6-Ounce Adhesive Kit|PSX 20 adhesive is a two-part epoxy siloxane adhesive designed for permanently joining fiberglass pipe and fittings with taper/taper joints. PSX 20 is a non-flowing thixotropic paste. The adhesive kit contains an adhesive resin, hardener, mixing spatula, and brush. The adhesive resin is a dark red paste with sand, The adhesive hardener is a white paste. The mixed adhesive color is red. PSX 20 can be used to connect epoxy, vinyl ester or phenolic systems. *This part does not qualify for 2nd Day Air, nor Next Day Air Delivery. |https://spatco.com/shop/products/ameron-60210101-psx-20-6-ounce-adhesive-kit|https://spatco.com//assets/products/images/60210101.jpg|in stock|46.4 USD|2 lb|Ameron||new|no| 2104-546|2104-546|Performance Ink 2104-546 30-Micron Filter|Performance Ink 2104-546 30-micron fuel dispenser filter removes particulate. Can be used in place of Cim-Tek 70020 Model 800-30 filter.|https://spatco.com/shop/products/performance-ink-2104-546-30-micron-filter|https://spatco.com//assets/products/images/2104-546.jpg|in stock|25.49 USD|1.5 lb|Performance Ink||new|no| 2104-451|2104-451|Performance Ink 2104-451 30-Micron Filter|Performance Ink 2104-451 30-micron fuel dispenser filter removes particulate and detects water or phase separation. Can be used in place of Cim-Tek 70106 Model 400MB-30 filter.|https://spatco.com/shop/products/performance-ink-2104-451-30-micron-filter|https://spatco.com//assets/products/images/2104-451.jpg|in stock|11.08 USD|1.2 lb|Performance Ink||new|no| 2104-446|2104-446|Performance Ink 2104-446 10-Micron Filter|Performance Ink 2104-446 10-Micron fuel dispenser filter removes particulate and detects water or phase separation. Can be used in place of Cim-Tek 70120 Model 400MB-10 filter.|https://spatco.com/shop/products/performance-ink-2104-446-10-micron-filter|https://spatco.com//assets/products/images/2104-446.jpg|in stock|10.94 USD|1.2 lb|Performance Ink||new|no| M44540301WWA5EPS10|M44540301WWA5EPS10|Verifone Model M400 Multilane Hardware Pin Pad with BP (EPS10) Software Injection|The Verifone M400 boasts a sleek, new, innovative design, and stunning 5 multitouch display with superior screen resolution. The M400 leverages a secure, connected framework to transform the in-store experience to deliver rich, two-way interactions that engage customers like never before. The Verifone M400 incorporates all the latest payment technology, including acceptance of the latest payment types, as well as beacon capabilities for added flexibility and delivery of personalized offers and value-added services. |https://spatco.com/shop/products/verifone-model-m400-multilane-hardware-pin-pad-with-bp-eps10-software-injection|https://spatco.com//assets/products/images/M44540301WWA5EPS10.png|in stock|1018.09 USD|7 lb|Verifone||new|no| PK-EZR0100-L1|PK-EZR0100-L1|OPW PK-EZR0100-L1 Green Diesel Hanging Hardware Kit|Hanging hardware kit includes one of each: 11B-0100 - Leaded Prepay Nozzle - Green 241TPS-0241 - 3/4 inch Two Plane Hose Swivel 66H-0975 - Standard 3/4 Whip Hose, 9-inch long, 3/4 NPT 68EZR-7575 - 3/4-Inch Dry Reconnectable Breakaway 66H-08575 - Standard 3/4 Hose, 8-1/2 feet long, 3/4 NPT 8G-0100 - Green Splash Guard|https://spatco.com/shop/products/opw-pk-ezr0100-l1-diesel-hanging-hardware-kit|https://spatco.com//assets/products/images/PK-EZR0100-L1.jpg|in stock|273.1 USD|24 lb|OPW||new|no| PK-EZR0400|PK-EZR0400|OPW PK-EZR0400 Black Unleaded Hanging Hardware Kit|Hanging hardware kit includes one of each: 11BP-0400 - Unleaded Automatic Nozzle - Black 241TPS-0241 - 3/4 inch Two Plane Hose Swivel 66H-0975 - Standard 3/4 Whip Hose, 9-inch long, 3/4 NPT 68EZR-7575 - 3/4-Inch Dry Reconnectable Breakaway 66H-08575 - Standard 3/4 Hose, 8-1/2 feet long, 3/4 NPT 8BL-0400 - Black Splash Guard|https://spatco.com/shop/products/opw-pk-ezr0400-unleaded-hanging-hardware-kit|https://spatco.com//assets/products/images/PK-EZR0400.jpg|in stock|273.1 USD|24 lb|OPW||new|no| 123041C|123041C|Irpco 123041C Crimped Coupling Whip Hose 1-Inch x 10-Inch|Irpco Whip Hose 1-Inch x 10-Inch, Male x Male ends.|https://spatco.com/shop/products/irpco-123041c-crimped-coupling-whip-hose-1-inch-x-10-inch|https://spatco.com//assets/products/images/123041C.png|in stock|34.33 USD|1.3 lb|Irpco||new|no| GD4590-BK-B|GD4590-BK-B|Datalogic Gryphon GD4590-BK-B Scanner|With an outstanding design, unchallenged ergonomics and a rich feature set, the Gryphon GD4500 product series from Datalogic represents the premium level of hand held scanners for general purpose applications. The dedicated optics specifically designed and uniquely tailored for the Gryphon, exploit a megapixel sensor and distinctive technology with highly visible warm-white illumination to achieve outstanding omnidirectional reading performance. Because of the increased motion tolerance, codes placed on fast-moving objects can be easily and quickly captured, creating the ideal hand held scanner for tasks requiring high throughput. Whether in department or specialty stores, in hyper stores and supermarkets, convenience stores or groceries, the Gryphon GD4500 scanner fits most any retail in-store requirement for POS checkout. A specialized model with red illumination provides the ultimate Digimarc® Barcode reading, as Digital Watermarking has become a new reality for top retailers.|https://spatco.com/shop/products/datalogic-gryphon-gd4590-bk-b-scanner|https://spatco.com//assets/products/images/GD4590-BK-B.png|in stock|367.14 USD|2 lb|Datalogic||new|no| EP100|EP100|Bravo EP100|Bravo 7 oz. standard epoxy kit; use with FRP, steel, PVC, and PVDF|https://spatco.com/shop/products/bravo-ep100|https://spatco.com//assets/products/images/EP100.png|in stock|42.99 USD|2 lb|Bravo||new|no| 70057|70057|Cim-Tek 70057 300 Series 2-Micron Microglass Particulate Spin-On Filter|To ensure your engine runs at peak performance, your fuel must be as clean as possible. Thats where Cim-Tek Filtration can help. Our Microglass is a high-performance media with a high void area to capture the finest of particulates, such as dirt, dust, and rust for the finest in filtration. It can withstand biodiesel blends up to B100 and can also be used with gasoline, diesel, ultra-low sulfur diesel (ULSD), and ethanol blends up to 15%. Made in the USA.|https://spatco.com/shop/products/cim-tek-70057-300-series-2-micron-microglass-particulate-spin-on-filter|https://spatco.com//assets/products/images/70057.jpg|in stock|14.92 USD|1.4 lb|Central Illinois||new|no| 70063|70063|Cim-Tek 70063 800HS-10 10 Micron Hydrosorb Fuel Dispenser Filter|Cim-Tek 70063 800HS-10 10 Micron Hydrosorb Fuel Dispenser Filter delivers up to 40 GPM and can be used for filtering Gasoline, Ethanol or Methanol blends up to 10%. Water detection material between Microglass-Cellulose Hybrid laminate reduces flow to notify operator water is present and that action is required. Not for Aviation applications. UL recognized. |https://spatco.com/shop/products/cim-tek-70063-800hs-10-10-micron-hydrosorb-fuel-dispenser-filter|https://spatco.com//assets/products/images/70063.jpg|in stock|28.83 USD|3.25 lb|Central Illinois||new|no| 40930W|40930W|Petro Clear 40930W 30 Micron Water-Sensing Filter|A superior grade water sensing and particulate removing pump filter for use on your fuel dispenser. Recommended by most major oil companies. Filters better lasts longer than competitive filters Excellent cold weather performance. Senses free and emulsified water and removes particulates from gasoline diesel and fuel oils. Compatible with alcohol-gasoline blended fuels (but cannot detect phase separation). Holds up to 34% more water than competitive filters. Epoxy coated interior shell eliminates pin-hole leaks caused by oxidation. Not intended for use with aviation fuels. |https://spatco.com/shop/products/petro-clear-40930w-30-micron-water-sensing-filter|https://spatco.com//assets/products/images/40930w.jpg|in stock|47.27 USD|2 lb|PetroClear||new|no| M445-403-01-WWA-5|M445-403-01-WWA-5|Verifone M400 M445-403-01-WWA-5 Pin Pad Blank Injection|Verifone M400 M445-403-01-WWA-5 Pin Pad Blank Injection|https://spatco.com/shop/products/verifone-m400-m445-403-01-wwa-5-pin-pad-blank-injection|https://spatco.com//assets/products/images/no-image.png|in stock|1071.67 USD|7 lb|Verifone||new|no| 06273|06273|Husky 6273 3/4-Inch Female X 3/4-Inch Female E85 Safe-T-Break Single-Use Breakaway|Instant-closing dual check valve design stops fuel in both directions. Compatible with unleaded, diesel, and ethanol blends through E85. |https://spatco.com/shop/products/husky-6273-3-4-inch-female-x-3-4-inch-female-e85-safe-t-break-single-use-breakaway|https://spatco.com//assets/products/images/06273.png|in stock|123.38 USD|1.2 lb|Husky||new|no| M10728K002S|M10728K002S|Gilbarco M10728K002S - Non-EMV Secure Card Reader for Gilbarco Advantage, Encore 300, Encore 500 and 500S|This is a Secure Card Reader (PCI 2.0) for Gilbarco Advantage, Encore 300 and Encore 500/500S. Does not include chip reader. This replacement card reader is non-EMV.|https://spatco.com/shop/products/gilbarco-m10728k002s-non-emv-secure-card-reader-for-gilbarco-advantage-encore-300-encore-500-and-500s|https://spatco.com//assets/products/images/M10728K002S.jpg|in stock|573.33 USD|3 lb|Gilbarco||new|no| 892645-002-028|892645-002-028|Wayne 892645-002-028 Right Side Softkey Overlay for Generic SPM Keypad|This overlay is for the right side keypad of Wayne non-branded generic dispensers.|https://spatco.com/shop/products/wayne-892645-002-028-right-side-softkey-overlay-for-generic-spm-keypad|https://spatco.com//assets/products/images/892645-002-028.jpg|in stock|7.2 USD|0.5 lb|Wayne||new|no| T92P7A22-120|T92P7A22-120|TE Connectivity T92P7A22-120 6-Pin Power Relay|Signal Relays, PCB, 30A, DPST-NO, Ctrl V 110/120AC, Vol Rating 120/277AC, 6 Pin. Used in Red Jacket’s family of submersible turbine pump controllers.|https://spatco.com/shop/products/te-connectivity-t92p7a22-120-6-pin-power-relay|https://spatco.com//assets/products/images/T92P7A22-120.png|in stock|19.5 USD|0.75 lb|TE CONNECTIVITY||new|no| 101BG-COVER|101BG-COVER|OPW 101BG-COVER 20-inch Composite Manhole Cover|20-inch Composite Manhole Cover from OPW to be used with OPW 101BG-2100 series below grade spill containers and 104C-2000 composite cover manhole.|https://spatco.com/shop/products/opw-101bg-cover-20-inch-composite-manhole-cover|https://spatco.com//assets/products/images/101BG-COVER.jpg|in stock|306.71 USD|18 lb|OPW||new|no| 8701-VV|8701-VV|Franklin Fueling Systems 8701-VV Breakaway With Vapor Path Shut-Off|This breakaway is designed to pull apart at a maximum 350-pound pull force. Both ends of the break, fuel and vapor path, instantly seal to contain fuel spills. Designed to be used with the Healy™ brand 600 Series Bootless Vapor Recovery Nozzles. Closeout Pricing - While Supplies Last!|https://spatco.com/shop/products/franklin-fueling-systems-8701-vv-breakaway-with-vapor-path-shut-off|https://spatco.com//assets/products/images/8701-VV.jpg|in stock|149.69 USD|5 lb|Healy||new|no| 818-0100AGEVR|818-0100AGEVR|Morrison Brothers 818-0100AGEVR 2-inch Clock Gauge with Standard Float Carb EVR Approved|The Morrison 818 series clock gauges are designed to measure the liquid level in storage tanks up to 12 feet in measurement. The liquid level reading is displayed in feet and inches. |https://spatco.com/shop/products/morrison-brothers-818-0100agevr-2-inch-clock-gauge-with-standard-float-carb-evr-approved|https://spatco.com//assets/products/images/818-0100AGEVR.jpg|in stock|640.08 USD|8 lb|Morrison Bros.||new|no| 400170934|400170934|Franklin Fueling Systems - 400170934 - Capacitor Assembly For 2 Hp Fixed Speed 60 Hz 40 Ufd 370 Volt Single-Phase|40 MFD capacitor for FE Petro 2 Hp, 60 Hz, 370 volt single-phase, fixed speed submersible motor.|https://spatco.com/shop/products/franklin-fueling-systems-400170934-capacitor-assembly-for-2-hp-fixed-speed-60-hz-40-ufd-370-volt-single-phase|https://spatco.com//assets/products/images/400170934.jpg|in stock|114.18 USD|2 lb|FE Petro||new|no| 62TT-7085|62TT-7085|OPW 62TT-7085 Tight-Fill Side-Seal Cap|Side-Seal Tight-Fill Caps are installed on side-seal adaptors, when not in use, to prevent gasoline vapors from escaping and to prevent water, dust and debris from entering the tank. The OPW 62TT-7085 Side-Seal Cap is designed to mate with the 61AS Side-Seal Adaptor. The cap has a lever and gasoline-resistant Buna-N gasket to help assure a positive seal. The 62TT-7085 is constructed of Duratuff®, a high-impact composite that helps eliminate rust and oxidation to assure a long, maintenance-free life.|https://spatco.com/shop/products/opw-62tt-7085-tight-fill-side-seal-cap|https://spatco.com//assets/products/images/62TT-7085.png|in stock|57.5 USD|4 lb|OPW||new|no| 5800100220|5800100220|Franklin Fueling 5800100220 SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt|The Guardian Series™ single-phase controller takes a major leap forward in fixed speed Submersible Turbine Pump (STP) control. Built upon the solid FE PETRO® brand smart controller platform, Guardian Series™ controllers feature an enhanced user interface, greater functionality, and higher performance compared to standard control boxes.|https://spatco.com/shop/products/franklin-fueling-5800100220-spgc-220-guardian-series-single-phase-controller-220-volt|https://spatco.com//assets/products/images/5800100220.jpg|in stock|580.62 USD|5 lb|FE Petro||new|no| BP1396|BP1396|OPW PB-1396 Hose Clamp|Fits standard 1 3⁄8 O.D. Hose (1 I.D.).|https://spatco.com/shop/products/pb-1396-hose-clamp|https://spatco.com//assets/products/images/PB-1396.jpg|in stock|21.24 USD|3 lb|OPW||new|no| WU005372-0006|WU005372-0006|Wayne WU005372-0006 Flurosilicon O-Ring|O-RING, T=5.33mm, ID=21.59|https://spatco.com/shop/products/wayne-wu005372-0006-flurosilicon-o-ring|https://spatco.com//assets/products/images/005-921130.jpg|in stock|16.55 USD|0.05 lb|Wayne||new|no| 012040-191-4|012040-191-4|Ameron 012040-191-4 Red Thread IIA, 4-Inch Bell x Male Threaded Adaptor|This bell is 5-1/2 inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012040-191-4-red-thread-iia-4-inch-bell-x-male-threaded-adaptor|https://spatco.com//assets/products/images/012040-191-4.jpg|in stock|112.9 USD|2 lb|Ameron||new|no| D00173M|D00173M|OPW D00173M 12-inch Replacement Lid for 104 Series Manholes|Cast iron cover for 104-series manholes. 13.125 inch O.D.|https://spatco.com/shop/products/opw-d00173m-12-inch-replacement-lid-for-104-series-manholes|https://spatco.com//assets/products/images/D00173M.jpg|in stock|152.5 USD|50 lb|OPW||new|no| P761C-EVRDV|P761C-EVRDV|OPW P761C-EVRDV 5 Gallon Spill Bucket with Drain Valve|Replacement For 700L Series Secondary Containment Manholes.|https://spatco.com/shop/products/opw-p761c-evrdv-5-gallon-spill-bucket-with-drain-valve|https://spatco.com//assets/products/images/P761C-EVRDV.jpg|in stock|818.35 USD|35 lb|OPW||new|no| 104A-1819|104A-1819|OPW 104A-1819 Series Cast Iron Manhole|OPW 104A-1819 Series Cast Iron Manhole|https://spatco.com/shop/products/opw-104a-1819-series-cast-iron-manhole|https://spatco.com//assets/products/images/no-image.png|in stock|270.2 USD|65 lb|OPW||new|no| 022289|022289|Gilbarco Electric Reset Assembly|Voltage/Frequency: 115V/60Hz Unlit Housing|https://spatco.com/shop/products/gilbarco-electric-reset-assembly|https://spatco.com//assets/products/images/022289.jpg|in stock|1164.1 USD|4.5 lb|Gilbarco||new|no| WU019498-0001|WU019498-0001|NEMA 5-15P Type B Edge Cable Assembly|NEMA 5-15P Type B Edge Cable Assembly|https://spatco.com/shop/products/nema-5-15p-type-b-edge-cable-assembly|https://spatco.com//assets/products/images/no-image.png|in stock|17.03 USD|2 lb|Wayne||new|no| WU019240-0003|WU019240-0003|Wayne WU019240-0003 - MINI PC Z83 II Module (Edge)|Intel Atom X5-Z8350 Processor32 GBSystem Disk: 32GBIntel HD Graphics 400SD Card SlotHDMIComputers, Tablets Network HardwareCommercial Office, Home Entertainment64 GBBuilt-in Wi-Fi Adapter|https://spatco.com/shop/products/wayne-wu019240-0003-mini-pc-z83-ii-module-edge|https://spatco.com//assets/products/images/WU019240-0003.jpg|in stock|736.86 USD|10 lb|Wayne||new|no| 70066|70066|Cim-Tek 70066 260AHS-30 Hydrosorb Media, 30 Micron, 1-3/8 - 12 UNF, 1 Flow Spin-on Filter|Cim-Tek 70066 260AHS-30 Hydrosorb Fuel Filter is used with gasoline, diesel, biodiesel blends up to B20, or ultra-low sulfur diesel (ULSD). |https://spatco.com/shop/products/cim-tek-70066-260ahs-30|https://spatco.com//assets/products/images/70066.jpg|in stock|16.77 USD|2 lb|Central Illinois||new|no| 70043|70043|Cim-Tek 70043 Model 475XLHS-30, 30 Micron Extended Length Spin-On Fuel Dispenser Filter|Cim-Tek 70043 475XLHS-30 Filter is used on gas service station pumps and commercial fueling dispensers. It is used for filtering gasoline, diesel, biodiesel, or ultra-low sulfur diesel (ULSD). Removes particulates and detect water. Does not detect phase separation.|https://spatco.com/shop/products/cim-tek-70043-model-475xlhs-30-30-micron-extended-length-spin-on-fuel-dispenser-filter|https://spatco.com//assets/products/images/70043.png|in stock|23 USD|3 lb|Central Illinois||new|no| M13940K901|M13940K901|Gilbarco M13940K901 Gilbarco Encore HCR2 M5/700 Universal Secure Card Reader without Heater.|This replacement part includes an installation gasket. Replacement part for P/N M12492K903. Requires software upgrade 3.4.06 Flex Pay II or higher.|https://spatco.com/shop/products/gilbarco-m13940k901-gilbarco-encore-hcr2-m5-700-universal-secure-card-reader-without-heater|https://spatco.com//assets/products/images/M12492B002.jpg|in stock|1915.95 USD|3 lb|Gilbarco||new|no| 012020-629-0|012020-629-0|Ameron 012020-629-0 2 LCX Split Sump Entry Fitting|Ameron 012020-629-0 2 LCX Split Sump Entry Fitting|https://spatco.com/shop/products/012020-629-0-ameron-2-lcx-split-sump-entry-fitting|https://spatco.com//assets/products/images/012020-629-0.jpg|in stock|99.76 USD|4 lb|Ameron||new|no| IA-PBCOVSA |IA-PBCOVSA |Power Integrity IA-PBCOVSA Small Lift-up Clear Cover with Alarm for E-stop Operators|Emergency Stop Controls are required by the National Electrical Code at all fueling facilities. Power Integrity offers a full line of emergency stop operators to meet your site requirements. Clear tamper-proof cover protects against accidental activation, damage, and vandalism. Alarm protects against nuisance activation. 5.5W x 7.0H (Yellow) |https://spatco.com/shop/products/power-integrity-ia-pbcovsa-small-lift-up-clear-cover-with-alarm-for-e-stop-operators|https://spatco.com//assets/products/images/IA-ESOC.jpg|in stock|190 USD|5 lb|Power Integrity|Yellow|new|no| IA-ESOCA|IA-ESOCA|Power Integrity IA-ESOCA Emergency Stop Operator with Lift-up Clear Cover and Alarm|Emergency Stop Controls are required by the National Electrical Code at all fueling facilities. Power Integrity offers a full line of emergency stop operators to meet your site requirements. Clear tamper-proof cover protects against accidental activation, damage, and vandalism. Alarm protects against nuisance activation.|https://spatco.com/shop/products/power-integrity-ia-esoca-emergency-stop-operator-with-lift-up-clear-cover-and-alarm|https://spatco.com//assets/products/images/IA-ESOC.jpg|in stock|270 USD|4.5 lb|Power Integrity||new|no| VL-4-3|VL-4-3|Performance Ink VL-4-3 4-Inch Black Vinyl Number 3 Decal|4-Inch x 4-Inch Black Vinyl Number 3 decal.|https://spatco.com/shop/products/performance-ink-vl-4-3-4-inch-black-vinyl-number-3-decal|https://spatco.com//assets/products/images/VL-4-3.jpg|in stock|4.1 USD|0.05 lb|Performance Ink||new|no| VL-4-2|VL-4-2|Performance Ink VL-4-2 4-Inch Black Vinyl Number 2 Decal|4-Inch x 4-Inch Black Vinyl Number 2 decal.|https://spatco.com/shop/products/performance-ink-vl-4-2-4-inch-black-vinyl-number-2-decal|https://spatco.com//assets/products/images/VL-4-2.jpg|in stock|3.95 USD|0.05 lb|Performance Ink||new|no| VL-4-1|VL-4-1|Performance Ink VL-4-1 4-Inch Black Vinyl Number 1 Decal|4-Inch x 4-Inch Black Vinyl Number 1 decal.|https://spatco.com/shop/products/performance-ink-vl-4-1-4-inch-black-vinyl-number-1-decal|https://spatco.com//assets/products/images/VL-4-1.jpg|in stock|3.95 USD|0.1 lb|Performance Ink||new|no| VL-4-0|VL-4-0|Performance Ink VL-4-0 4-Inch Black Vinyl Number 0 Decal|4-Inch x 4-Inch Black Vinyl Number 0 decal.|https://spatco.com/shop/products/performance-ink-vl-4-0-4-inch-black-vinyl-number-0-decal|https://spatco.com//assets/products/images/VL-4-0.jpg|in stock|3.95 USD|0.05 lb|Performance Ink||new|no| U-MD-800-W|U-MD-800-W|United Sign U-MD-800-W 6-Inch x 2-Inch Ethanol Decal|Decal reads: MAY CONTAIN UP TO 10% ETHANOLSize: 6 W x 2 HSingle SidedPeel and Stick DecalColor: Black on WhiteMaterial: Vinyl|https://spatco.com/shop/products/united-sign-u-md-800-w-6-inch-x-2-inch-ethanol-decal|https://spatco.com//assets/products/images/U-MD-800-W.jpg|in stock|4.75 USD|0.05 lb|United Sign||new|no| TD-30|TD-30|Performance Ink TD-30 10.75-Inch x 10.75-Inch NFPA Hazzard Decal|10.75-Inch x 10.75-Inch NFPA Hazzard Decal|https://spatco.com/shop/products/performance-ink-td-30-10-75-inch-x-10-75-inch-nfpa-hazzard-decal|https://spatco.com//assets/products/images/TD-30.jpg|in stock|6.69 USD|0.05 lb|Performance Ink||new|no| PID-MC258|PID-MC258|Performance Ink PID-MC258 4-Inch x 5-Inch Contains 10% Ethanol Decal|Performance Ink PID-MC258 4-Inch x 5-Inch Contains 10% Ethanol Decal|https://spatco.com/shop/products/performance-ink-pid-mc258-4-inch-x-5-inch-contains-10-ethanol-decal|https://spatco.com//assets/products/images/no-image.png|in stock|6.85 USD|0.05 lb|Performance Ink||new|no| PID-APP5B|PID-APP5B|Performance Ink PID-APP5B 6-Inch x 5-Inch Biodiesel Decal|Decal reads: CONTAINS UP TO 5% BIODIESEL Size: 6 W x 5 H|https://spatco.com/shop/products/performance-ink-pid-app5b-6-inch-x-5-inch-biodiesel-decal|https://spatco.com//assets/products/images/PID-APP5B.jpg|in stock|4.75 USD|0.05 lb|Performance Ink||new|no| PID-AD-FL|PID-AD-FL|Performance Ink PID-AD-FL Fuel Assistance Available Decal|Florida ADA Decal with Blank for Phone Number Decal reads: Fuel Assistance Available / Call For Assistance |https://spatco.com/shop/products/performance-ink-pid-ad-fl-fuel-assistance-available-decal|https://spatco.com//assets/products/images/PID-AD-FL.jpg|in stock|3.58 USD|1 lb|Performance Ink||new|no| PID-235C|PID-235C|Performance Ink PID-235C All Fuel Grades Contain Up to 10% Ethanol Decal|Decal reads: All fuel grades in this dispenser CONTAIN UP TO 10% ETHANOL|https://spatco.com/shop/products/performance-ink-pid-235c-all-fuel-grades-contain-up-to-10-ethanol-decal|https://spatco.com//assets/products/images/PID-235C.jpg|in stock|5.7 USD|0.5 lb|Performance Ink||new|no| PI-401-678|PI-401-678|Performance Ink PI-401-678 5-Inch x 3-Inch 10% Ethanol Decal|Decal reads: CONTAINS UP TO 10% ETHANOL Size: 5 W x 3 H|https://spatco.com/shop/products/performance-ink-pi-401-678-5-inch-x-3-inch-10-ethanol-decal|https://spatco.com//assets/products/images/PI-401-678.jpg|in stock|5.7 USD|0.05 lb|Performance Ink||new|no| MD-177|MD-177|United Sign MD-177 13-Inch x 6-Inch NO SMOKING WITHIN 50 FT Decal|Decal reads: NO SMOKING Within 50 feet Single Sided Peel and Stick Decal Color: Red on White Material: Vinyl Size: 13 W x 6 H|https://spatco.com/shop/products/united-sign-md-177-13-inch-x-6-inch-no-smoking-within-50-ft-decal|https://spatco.com//assets/products/images/MD-177.jpg|in stock|5.83 USD|0.01 lb|United Sign||new|no| 521KR-8012|521KR-8012|Universal 521KR-8012 8-Inch to 12-Inch U-Clamp Anchor|Secures any remote pump safety valve, conforming with NPFA Code 30.|https://spatco.com/shop/products/universal-521kr-8012-8-inch-to-12-inch-u-clamp-anchor|https://spatco.com//assets/products/images/521KR-8012.jpg|in stock|151.31 USD|5 lb|Universal||new|no| 1002L-4|1002L-4|Universal 1002L-4 Four-Inch x Four-Inch Pipe Extension|This extension compensates for ground heaving and settling in existing installations. It is recommended for all new installations, to add height to the riser pipe.|https://spatco.com/shop/products/universal-1002l-4-four-inch-x-four-inch-pipe-extension|https://spatco.com//assets/products/images/1002L-4.jpg|in stock|70.03 USD|8 lb|Universal||new|no| 870|870|Universal Valve 870 Hose Retriever|Keep hoses suspended at truck stops and industrial sites. Protects hoses from excessive wear and damage. Prevents tangles and kinking. Reduces injury to customers from tripping accidents. The swivel head permits 360° rotation for easy service in any direction. Saving and protecting hose by extending life, and eliminating expensive insurance claims from possible accident. - Allows safe, easy fueling of trucks- Head permits 360 rotation for total service in any direction- Installs on a 20’ length of 2” pipe- Rugged cast iron body and weights- Compatible with E-85|https://spatco.com/shop/products/universal-870-hose-retriever|https://spatco.com//assets/products/images/870.jpg|in stock|417.61 USD|29.65 lb|Universal Valve||new|no| 521R-15-I|521R-15-I|Universal 521R-15-I Reset Nut For Universal Shear Valve|This replacement reset nut is used with Model 521 Single Poppet Safety Valve.|https://spatco.com/shop/products/universal-521r-15-i-reset-nut-for-universal-shear-valve|https://spatco.com//assets/products/images/521R-15-I.jpg|in stock|14.14 USD|1 lb|Universal||new|no| 303-1520|303-1520|Universal 303-1520 1-1/2” NPT, 2” Offset Shorty Offset Adapter|This adapter compensates for misalignment of the dispenser, suction stub, and dispenser boxes, where space is critical. Allows for easy, fast dispenser up-grades. Designed for low height requirements. In use and extremely popular for over 25 years. Now an industry standard only from Universal. Saves time and money during installations. Prevents any strain on piping and dispenser boxes.|https://spatco.com/shop/products/universal-303-1520-1-1-2-npt-2-offset-shorty-offset-adapter|https://spatco.com//assets/products/images/303-1520.jpg|in stock|59.49 USD|4 lb|Universal||new|no| 0613VC-30|0613VC-30|Universal 0613VC-30 Vapor Recovery Flat Top Cap|Low profile which extends only 5/8” above the adapter, allows maximum clearance in manhole, and has a total water and vapor seal solution. This compensates for ground heaving and settling.|https://spatco.com/shop/products/universal-0613vc-30-vapor-recovery-flat-top-cap|https://spatco.com//assets/products/images/0613VC-30.jpg|in stock|123.18 USD|8 lb|Universal||new|no| 303-1515|303-1515|Universal 303-1515 1-1/2” NPT, 1-1/2” Offset Shorty Offset Adapter|This adapter compensates for misalignment of the dispenser, suction stub, and dispenser boxes, where space is critical. Allows for easy, fast dispenser up-grades. Designed for low height requirements. In use and extremely popular for over 25 years. Now an industry standard only from Universal. Saves time and money during installations. Prevents any strain on piping and dispenser boxes.|https://spatco.com/shop/products/universal-303-1515-1-1-2-npt-1-1-2-offset-shorty-offset-adapter|https://spatco.com//assets/products/images/303-1515.jpg|in stock|59.49 USD|4 lb|Universal||new|no| 870-HB100|870-HB100|Universal 870-HB100 Hose Retractor With 1-Inch Hose Bun|Keep hoses suspended at truck stops and industrial sites. Protects hoses from excessive wear and damage. Prevents tangles and kinking. The swivel head permits 360˚ rotation for easy service in any direction saving and protecting hose by extending life, and eliminating expensive insurance claims from possible accidents.|https://spatco.com/shop/products/universal-870-hb100-hose-retractor-with-1-inch-hose-bun|https://spatco.com//assets/products/images/870-HB100.jpg|in stock|567.32 USD|25 lb|Universal||new|no| 1002S-4|1002S-4|Universal 1002S-4 Four-Inch x Four-Inch Pipe Extension|This extension compensates for ground heaving and settling in existing installations. It is recommended for all new installations, to add height to the riser pipe.|https://spatco.com/shop/products/universal-1002s-4-four-inch-x-four-inch-pipe-extension|https://spatco.com//assets/products/images/1002S-4.jpg|in stock|61.6 USD|2.5 lb|Universal||new|no| 303-1525|303-1525|Universal 303-1525 1-1/2” NPT, 2-1/2” Offset Shorty Offset Adapter|This adapter compensates for misalignment of the dispenser, suction stub, and dispenser boxes, where space is critical. Allows for easy, fast dispenser up-grades. Designed for low height requirements. In use and extremely popular for over 25 years. Now an industry standard only from Universal. Saves time and money during installations. Prevents any strain on piping and dispenser boxes.|https://spatco.com/shop/products/universal-303-1525-1-1-2-npt-2-1-2-offset-shorty-offset-adapter|https://spatco.com//assets/products/images/303-1525.jpg|in stock|67.66 USD|2.2 lb|Universal||new|no| 731-4|731-4|Universal 731-4 Four-Inch Flat Top Cap Top Seal|Low profile which extends only 5/8” above the adapter, allows maximum clearance in manhole. Provides a total seal. A special low profile design allows for maximum clearance in manhole installations to compensate for ground heaving and settling. This cam-action cap and handle design combines with the gasket to produce a water and vapor tight total seal solution. |https://spatco.com/shop/products/universal-731-4-four-inch-flat-top-cap-top-seal|https://spatco.com//assets/products/images/731-4.jpg|in stock|121.49 USD|4 lb|Universal||new|no| 285-02062S|285-02062S|Morrison 285-02062S Two-Inch Cast Iron Line Strainer|This is a Y-type strainer used in pipelines to filter debris from flowing into and damaging equipment such as a pump or a meter. The strainer basket is removable for cleaning and/or replacement. Basket access is from the bottom. Operating Pressure is 50 PSI.|https://spatco.com/shop/products/morrison-285-02062s-two-inch-cast-iron-line-strainer|https://spatco.com//assets/products/images/285-02062S.jpg|in stock|62.73 USD|5 lb|Morrison Bros.||new|no| 246A-0200-AV|246A-0200-AV|Morrison 246A-0200-AV Threaded Two-Inch Swing Check Valve|Designed to prevent backflow in horizontal piping systems. Swing check valves allow liquid to flow in a single direction.|https://spatco.com/shop/products/morrison-246a-0200-av-threaded-two-inch-swing-check-valve|https://spatco.com//assets/products/images/246A-0200-AV.jpg|in stock|235.96 USD|6.6 lb|Morrison Bros.||new|no| 610HB-0100AR|610HB-0100AR|Morrison 610HB-0100AR Hose Retriever Assembly with Standard Base and Hose Hanger|This kit includes the hose retreiver assembly (610---0100 AR), standard base (610B--0100 WAPB), hose hanger (610HGR0100 AH), and single weight kit (610---0103 AK).|https://spatco.com/shop/products/morrison-610hb-0100ar-hose-retriever-assembly-with-standard-base-and-hose-hanger|https://spatco.com//assets/products/images/610HB-0100AR.jpg|in stock|731.87 USD|39 lb|Morrison Bros.||new|no| 434CB-0075-1B|434CB-0075-1B|Morrison 434CB-0075-1B .75-Inch Connection Boot|This 3/4-Inch sump entry fitting, connection boot, is used with the Model 434/434S Dispenser Pedestal.|https://spatco.com/shop/products/morrison-434cb-0075-1b-75-inch-connection-boot|https://spatco.com//assets/products/images/434CB-0075-1B.jpg|in stock|37.79 USD|1 lb|Morrison Bros.||new|no| 179-0100AC|179-0100AC|Morrison 179-0100AC Two-Inch, Aluminum, Female-Thread, Hinged-Style Fill Cap|Designed for tank filling applications where a tight fill connection is not required. Threaded body installs onto riser pipe or directly into tank bung.|https://spatco.com/shop/products/morrison-179-0100ac-two-inch-aluminum-female-thread-hinged-style-fill-cap|https://spatco.com//assets/products/images/179-0100AC.jpg|in stock|19.71 USD|4 lb|Morrison Bros.||new|no| 749T-0200AV|749T-0200AV|Morrison 749T-0200AV Two-Inch Pressure Vacuum Vent|Pressure vacuum vents are installed on the top of underground and low volume aboveground storage tank vent pipes. Vent allows tank to breathe during filling and discharging operations. Pressure and vacuum poppet seal vapors in tank when pressure is equalized. Settings are approximate. The 749T is designed for use on underground and low volume aboveground tanks storing Diesel Exhaust Fluid (DEF) and other products requiring Teflon® and stainless construction.|https://spatco.com/shop/products/morrison-749t-0200av-two-inch-pressure-vacuum-vent|https://spatco.com//assets/products/images/749T-0200AV.jpg|in stock|398.43 USD|3 lb|Morrison Bros.||new|no| 244OF-0100AV|244OF-0100AV|Morrison 244OF-0100AV 8-Inch 8oz/sq.in. Flanged Emergency Vent with O-Ring|UL Listed emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire. The vent must be used in conjunction with a “normal vent.” Correct application of this vent requires proper vent size and selection. The 244 emergency vent is for emergency pressure relief only and must be used in conjunction with a normal vent or pressure vacuum vent.|https://spatco.com/shop/products/morrison-244of-0100av-8-inch-8oz-sq-in-flanged-emergency-vent-with-o-ring|https://spatco.com//assets/products/images/244OF-0100AV.jpg|in stock|390.34 USD|44.3 lb|Morrison Bros.||new|no| 244F-0107AN|244F-0107AN|Morrison 244F-0107AN Six-Inch and Eight-Inch Nut and Bolt Kit|Replacement nuts and bolts used on the 244 series of 6-inch and 8-inch vents.|https://spatco.com/shop/products/morrison-244f-0107an-six-inch-and-eight-inch-nut-and-bolt-kit|https://spatco.com//assets/products/images/244F-0107AN.jpg|in stock|41.16 USD|4.45 lb|Morrison Bros.||new|no| 918-0100AG|918-0100AG|Morrison 918-0100AG Two-Inch Clock Gauge with Overfill Alarm and Standard Float|The Morrison “clock gauge” displays the liquid level of product stored in an above-ground storage tank. Measures the liquid level in tanks up to 12 feet high. The 918 audible alarm sounds when the liquid level in the tank reaches the user’s specified level. |https://spatco.com/shop/products/morrison-918-0100ag-two-inch-clock-gauge-with-overfill-alarm-and-standard-float|https://spatco.com//assets/products/images/918-0100AG.jpg|in stock|1429.46 USD|9 lb|Morrison Bros.||new|no| 636-0115AH|636-0115AH|Morrison 636-0115AH Two-Inch Aluminum Valve Handle with Screw|This replacement valve handle is used in the Model 636 Emergency Shut-Off Valves.|https://spatco.com/shop/products/morrison-636-0115ah-two-inch-aluminum-valve-handle-with-screw|https://spatco.com//assets/products/images/636-0115AH.jpg|in stock|48.92 USD|1.5 lb|Morrison Bros.||new|no| 846400-101|846400-101|Veeder Root 846400-101Two-Inch Mag Plus Float Kit for Diesel with Five-Foot Cable|This kit includes: (1) product float(1) water float(1) boot(2) 3/4-inch adjustable adapters(2) 2-inch non-adjustable adapters(1) five-foot cable|https://spatco.com/shop/products/veeder-root-846400-101-two-inch-mag-plus-float-kit-for-diesel-with-five-foot-cable|https://spatco.com//assets/products/images/846400-101.jpg|in stock|866.29 USD|2.15 lb|Veeder Root||new|no| 794380-323|794380-323|Veeder Root 794380-323 Position Sensitive Pan / Sump Sensor with 12-Foot Cable|Provides positive alarm indication of any liquid in underground fuel storage tank sumps or pans. Provides positive alarm indication if the sensor is moved from its installed position on the bottom of the sump. |https://spatco.com/shop/products/veeder-root-794380-323-position-sensitive-pan-sump-sensor-with-12-foot-cable|https://spatco.com//assets/products/images/794380-323.jpg|in stock|800 USD|5 lb|Veeder Root||new|no| 331190-001|331190-001|Veeder Root 331190-001 120V AC Power Module|This 120 volt AC Input Module is used in the TLS-350 and TLS-350R consoles.|https://spatco.com/shop/products/veeder-root-331190-001-120v-ac-power-module|https://spatco.com//assets/products/images/331190-001.jpg|in stock|402 USD|0.45 lb|Veeder Root||new|no| 330843-001|330843-001|Veeder Root 330843-001 Six-Input Line Leak Interface Module|This pressurized line leak interface module is a low voltage compartment that works with the TLS-350 and TLS-350R. One module has inputs for up to six line leak detectors in each console.|https://spatco.com/shop/products/veeder-root-330843-001-six-input-line-leak-interface-module|https://spatco.com//assets/products/images/330843-001.jpg|in stock|877.71 USD|2.5 lb|Veeder Root||new|no| 330020-627|330020-627|Veeder Root 330020-627 Package of Four Paper Rolls|Replacement paper for the TLS-450 and TLS-450 Plus printers.|https://spatco.com/shop/products/veeder-root-330020-627-package-of-four-paper-rolls|https://spatco.com//assets/products/images/330020-627.jpg|in stock|153.14 USD|1.35 lb|Veeder Root||new|no| 330020-619|330020-619|Veeder Root 330020-619 TLS-450 Universal Sensor / Probe Interface Module|Replaces factory installed part number 332812-001. This sixteen-input module supports all probes and sensors, except analog PLLD. Compatiable with the TLS-450 Series console. |https://spatco.com/shop/products/veeder-root-330020-619-tls-450-universal-sensor-probe-interface-module|https://spatco.com//assets/products/images/330020-619.jpg|in stock|2724 USD|2.5 lb|Veeder Root||new|no| 330374-001|330374-001|Veeder Root 330374-001 Three-Output Pressurized Line Leak Controller Module|Used with the TLS-350/TLS-350 Plus/TLS-350R consoles. One controller module monitors up to three lines. There is a maximum of two controllers per console.|https://spatco.com/shop/products/veeder-root-330374-001-three-output-pressurized-line-leak-controller-module|https://spatco.com//assets/products/images/330374-001.jpg|in stock|893.71 USD|2 lb|Veeder Root||new|no| 790095-001|790095-001|Veeder Root 790095-001 Alarm Acknowledgement Switch|Turns off alarm unit while actuating acknowledgement lamp. |https://spatco.com/shop/products/veeder-root-790095-001-alarm-acknowledgement-switch|https://spatco.com//assets/products/images/790095-001.jpg|in stock|734.86 USD|15 lb|Veeder Root||new|no| 790091-001|790091-001|Veeder Root 790091-001 Overfill Alarm|The Veeder-Root 790091-001 Overfill Alarm provides an early warning of potential tank bulk delivery overfills as required by the Federal regulations governing underground storage tanks. Wired to an alarm relay in a TLS-350R, TLS-350, TLS-350J, TLS-300, TLS-300C, TLS-300i, TLS-300, ILS-350, and TLS-250 or TLS-250i System, the alarm relay activates the TLS overfill alarm horn and light when a potential overfill is detected. All TLS systems have programmable overfill alarm limits that can be set for each tank at a location. A built-in timer lets you adjust length of time that the audible alarm will stay on from 0 to 60 seconds. You can also adjust noise level from 78 to 103dB (at 10 feet). |https://spatco.com/shop/products/veeder-root-790091-001-overfill-alarm|https://spatco.com//assets/products/images/790091-001.jpg|in stock|1148.57 USD|15 lb|Veeder Root||new|no| 330020-425GEN|330020-425GEN|Refurbished Veeder Root 330020-425GEN Ethernet TCP/IP Communication Module|This Ethernet module is used with TLS-350 series consoles. Supported protocols: ARP, UDP, TCP, IP, Telnet, DHCP.|https://spatco.com/shop/products/veeder-root-330020-425gen-ethernet-tcp-ip-communication-module|https://spatco.com//assets/products/images/330020-425.jpg|in stock|432.86 USD|3 lb|Veeder Root||new|no| 886100-000|886100-000|Veeder Root 886100-000 Phase Separation Detection Float Kit with Five-Foot Cable|Use in any gasoline storage tank containing up to 15% ethanol. This Phase-Two Float Kit replaces the traditional gasoline float kit. The float kit also works in pure gasoline with better performance for water detection than existing float kits by having a lower minimum detectable water height, allowing station owners to respond to a potential problem more quickly. This kit includes a product float, water float, boot, two 3/4-inch adjustable adapters, and a five-foot cable.|https://spatco.com/shop/products/veeder-root-886100-000-phase-separation-detection-float-kit-with-five-foot-cable|https://spatco.com//assets/products/images/886100-000.jpg|in stock|674 USD|4 lb|Veeder Root||new|no| 410164-001|410164-001|Red Jacket 410164-001 17.5 uF Capacitor Kit|This kit is used in replacing the capacitor in the manifold for single phase pumps. The capacitor is 440V, 17.5 µF continuous duty with internal bleed resistor for 3/4 HP models.|https://spatco.com/shop/products/red-jacket-410164-001-17-5-uf-capacitor-kit|https://spatco.com//assets/products/images/410164-001.jpg|in stock|141.63 USD|4 lb|Red Jacket||new|no| 410154-001|410154-001|Red Jacket 410154-001 Hardware/Seal Kit|This Hardware/Seal Kit is required for proper servicing of the Red Jacket® Quick-Set® Submersible Pump assembly. This kit includes:(1) O-ring - 118-V121 (072-541-1)(1) O-ring - 225-V123 (072-578-1)(2) O-ring - 114-V123 (072-685-1)(1) O-ring - 228-V123 (072-686-1)(3) O-ring - 928-V75 (072-720-1)(1) O-ring - 343-V121 (579005-001)(1) O-ring - 344-V121 (579005-002)(1) O-ring - 345-V121 (579005-003)(2) O-ring - 117-V121 (579005-004)(4) O-ring - 121-V121 (579005-005)(1) O-ring - 231-V121 (579005-006)(1) O-ring - 014-V121 (579005-007)(1) O-ring - 903-V121 (579005-009)(2) O-ring - 015-V123 (072-690-1)(2) Nut - flanged - M12x1.75-6H (410127-001)(1) Hitch pin (579014-002)(1) O-ring gauge (577013-835)|https://spatco.com/shop/products/red-jacket-410154-001-hardware-seal-kit|https://spatco.com//assets/products/images/410154-001.jpg|in stock|189.71 USD|5 lb|Red Jacket||new|no| 410153-002|410153-002|Red Jacket 410153-002 High Pressure Check Valve Kit|This replacement check check valve kit is used in with the Red Jacket STP and variable speed STP. This kit includes (1) Hi press poppet assembly, check relief valve (410022-006) and (1) spring (410753-001).|https://spatco.com/shop/products/red-jacket-410153-002-high-pressure-check-valve-kit|https://spatco.com//assets/products/images/410153-002.jpg|in stock|259.66 USD|1 lb|Red Jacket||new|no| 410151-001|410151-001|Red Jacket 410151-001 Syphon Check Valve Cartridge Kit|This replacement check valve kit contains the following components: (1) “O” Ring - Check Valve Seat (3-1/4 x 3-1/2 x 1/8) (072-107-1)(1) Check Valve Seat (28 076-085-3)(2) Machine Screws (1/4 x 20 x 1/2) (29 026-627-1)(1) Check Valve Spring (30 079-161-1)(1) Cap Stem Assembly Check Valve (31 111-065-4)(1) Disc Holder Assembly for Check Valve (32 138-049-5)|https://spatco.com/shop/products/red-jacket-410151-001-syphon-check-valve-cartridge-kit|https://spatco.com//assets/products/images/410151-001.jpg|in stock|271.9 USD|8 lb|Red Jacket||new|no| 144-186-5|144-186-5|Red Jacket 144-186-5 Big Flow Check Valve Kit|This replacement check valve kit contains the following components: (1) “O” Ring - Check Valve Seat (3-1/4 x 3-1/2 x 1/8) (072-107-1)(1) Check Valve Seat (28 076-085-3)(2) Machine Screws (1/4 x 20 x 1/2) (29 026-627-1)(1) Check Valve Spring (30 079-161-1)(1) Cap Stem Assembly Check Valve (31 111-065-4)(1) Disc Holder Assembly for Check Valve (32 138-049-5)|https://spatco.com/shop/products/red-jacket-144-186-5-big-flow-check-valve-kit|https://spatco.com//assets/products/images/144-186-5.jpg|in stock|702.93 USD|1 lb|Red Jacket||new|no| 072-108-1|072-108-1|Red Jacket 072-108-1 Big Flo O-Ring Packer Assembly|This 5-1/2 x 6 x 1/4 replacement O-Ring is used in all Big-Flo model pumps.|https://spatco.com/shop/products/red-jacket-072-108-1-big-flo-o-ring-packer-assembly|https://spatco.com//assets/products/images/072-108-1.jpg|in stock|15.74 USD|5 lb|Red Jacket||new|no| 079-425-1|079-425-1|Red Jacket 079-425-1 Line Contactor Relay for 1/3 1/2 HP Control Box|This replacement part is used with Red Jacket Standard submersible turbines. This part is used with control boxes built prior to June 1995.|https://spatco.com/shop/products/red-jacket-079-425-1-line-contactor-relay-for-1-3-1-2-hp-control-box|https://spatco.com//assets/products/images/079-425-1.jpg|in stock|114.18 USD|4 lb|Red Jacket||new|no| 410649-008|410649-008|Red Jacket 410649-008 GE Ambient Compensated Heater|CR123C180B Trip Amps 19.4 ±10%. Quantity of three required.|https://spatco.com/shop/products/red-jacket-410649-008-ge-ambient-compensated-heater|https://spatco.com//assets/products/images/410649-008.jpg|in stock|79.56 USD|3 lb|Red Jacket||new|no| 113-085-5|113-085-5|Red Jacket 113-085-5 3/4 HP Capacitor Cover Assembly with O-Ring|This replacement cover is used with the Extracta models P33R1, P75S1 and P150S1.|https://spatco.com/shop/products/red-jacket-113-085-5-3-4-hp-capacitor-cover-assembly-with-o-ring|https://spatco.com//assets/products/images/113-085-5.jpg|in stock|76.94 USD|2 lb|Red Jacket||new|no| 038-072-5|038-072-5|Red Jacket 038-072-5 Leak Detector Adapter Housing|This replacement part is used with Red Jacket Standard submersible turbines.|https://spatco.com/shop/products/red-jacket-038-072-5-leak-detector-adapter-housing|https://spatco.com//assets/products/images/038-072-5.jpg|in stock|83.93 USD|8 lb|Red Jacket||new|no| 900CD|900CD|Fill-Rite 900CD - 1-Inch NPT Digital Flow Meter|The Fill-Rite 900CD 1-inch NPT Digital Meter with 4-digit LCD screen, displays flow range between 6 to 40 gallons per minute. With 1-inch inlet/outlet and electronic head that rotates 90° for multiple set-up options. Faceplate is made from stabilized material. Mounts to most standard pumps.|https://spatco.com/shop/products/fill-rite-900cd-1-inch-npt-digital-flow-meter|https://spatco.com//assets/products/images/900D.jpg|in stock|480.13 USD|9 lb|Fill-Rite||new|no| 40510P-AD|40510P-AD|Petro Clear 40510P-AD 10-Micron Particulate Removing Filter, 1-Inch Flow|PetroClear® model 40510P-AD is a particulate removing spin-on filters designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed for particulate removal only and WILL NOT REACT TO WATER IN FUELS OR PHASE SEPARATION IN ETHANOL BLENDED GASOLINE TO SLOW FLOW. This filter offers efficient 10 micron (nominal) particulate removal. Compatible with neat gasoline, Ethanol blended fuels and all diesels, including Biodiesel fuels. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. |https://spatco.com/shop/products/petro-clear-40510p-ad-10-micron-particulate-removing-filter-1-inch-flow|https://spatco.com//assets/products/images/40510P-AD.jpg|in stock|21.9 USD|1.5 lb|PetroClear||new|no| 40510W|40510W|Petro Clear 40510W 10-Micron Water Sensing Filter, 3/4-Inch Flow|PetroClear® model 40510W is a particulate removing and water sensing spin-on filters designed to remove particulate and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense nor react to water in Ethanol blended gasoline. (Reaction known as phase separation) This filter offers efficient 10 micron (nominal) particulate removal and senses both free and emulsified water in neat gasoline and diesel fuels. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. Will not detect phase separation in Ethanol blended fuels. |https://spatco.com/shop/products/petro-clear-40510w-10-micron-water-sensing-filter-3-4-inch-flow|https://spatco.com//assets/products/images/40510W.jpg|in stock|29.79 USD|3.5 lb|PetroClear||new|no| 40930P-AD|40930P-AD|Petro Clear 40930P-AD 30-Micron Particulate Removing Filter, 1-Inch Flow|The 40930P-AD is designed to remove particulate from gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene and fuel oils. This is a particulate spin-on filter. This filter is designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINE TO SLOW FLOW. This filter offers efficient 30 micron (nominal) particulate removal. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. Compatible with neat gasoline, Ethanol blended fuels and all diesels including Biodiesels. |https://spatco.com/shop/products/petro-clear-40930p-ad-30-micron-particulate-removing-filter-1-inch-flow|https://spatco.com//assets/products/images/40930P-AD.jpg|in stock|23.39 USD|3.2 lb|PetroClear||new|no| 40530P|40530P|Petro Clear 40530P 30-Micron Particulate Removing Filter, 3/4-Inch Flow|PetroClear® model 40530P is a particulate removing spin-on filters designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed for particulate removal only and WILL NOT REACT TO WATER IN FUELS OR PHASE SEPARATION IN ETHANOL BLENDED GASOLINES TO SLOW FLOW. This filter offers efficient 30 micron (nominal) particulate removal. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. |https://spatco.com/shop/products/petro-clear-40530p-30-micron-particulate-removing-filter-3-4-inch-flow|https://spatco.com//assets/products/images/40530P.jpg|in stock|27.56 USD|1.2 lb|PetroClear||new|no| 40510A|40510A|Petro Clear 40510A 10-Micron Phase Separation Detection Filter, 3/4-Inch Flow|PetroClear® model 40510A is a spin-on filters designed to remove particulate, detect and stop flow of phase separation (Ethanol water) in Ethanol blended fuels. The “Alert” model 40510A is designed to remove particulate and to detect and react to phase separation in Ethanol blended gasoline and slow flow as an indicator to the presence of phase separation. IT WILL NOT SENSE NOR REACT TO WATER IN NON-ALCOHOL BLENDED GASOLINE (NEAT GASOLINE). This filter offers efficient 10 micron (nominal) particulate removal and detects phase separation. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. |https://spatco.com/shop/products/petro-clear-40510a-10-micron-phase-separation-detection-filter-3-4-inch-flow|https://spatco.com//assets/products/images/40510A.jpg|in stock|38.06 USD|3 lb|PetroClear||new|no| 51130W|51130W|Petro Clear 51130W 30-Micron Water Sensing Filter, 1-Inch Flow|PetroClear® model 51130W is a particulate removing and water sensing spin-on filters designed for aftermarket, cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial applications. This filter is designed to remove particulate and to sense both free and emulsified water from neat gasoline, Ethanol blended gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils, lube oils and synthetic fluids. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense or react to water in Ethanol blended gasoline. This filter offers efficient 30 micron (nominal) particulate removal and senses both free and emulsified water. This filter will not detect phase separation should it occur in Ethanol blended fuels. |https://spatco.com/shop/products/petro-clear-51130w-30-micron-water-sensing-filter-1-inch-flow|https://spatco.com//assets/products/images/51130W.jpg|in stock|84.11 USD|3.5 lb|PetroClear||new|no| 40510P|40510P|Petro Clear 40510P 10-Micron Particulate Removing Filter, 3/4-Inch Flow|PetroClear® model 40510P is a particulate spin-on filter. This filter is designed for particulate removal only and WILL NOT REACT TO WATER IN FUELS OR PHASE SEPARATION IN ETHANOL BLENDED GASOLINES TO SLOW FLOW. This filter offers efficient 10 micron (nominal) particulate removal. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. |https://spatco.com/shop/products/petro-clear-40510p-10-micron-particulate-removing-filter-3-4-inch-flow|https://spatco.com//assets/products/images/40510P.jpg|in stock|27.56 USD|1.2 lb|PetroClear||new|no| 40510D| 40510D|Petro Clear 40510D 10-Micron Phase Separation Water Sensing Filter, 3/4-Inch Flow|PetroClear® model 40510D is a particulate removing, water sensing and phase separation detecting spin-on filter designed to remove particulate from neat gasoline or Ethanol blended gasoline. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline. This filter is also designed to detect and react to phase separation. Slow flow is an indicator of the presence of phase separation in Ethanol blended gasoline. This filter offers efficient 10 micron (nominal) particulate removal, and senses both free and emulsified water in neat gasoline and detects and reacts to phase separation should it occur, significantly reducing the flow. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. This patented dual filter from Champion Laboratories, Inc. protects during the transition from neat gasoline to ethanol blends without changing filters.|https://spatco.com/shop/products/petro-clear-40510d-10-micron-phase-separation-water-sensing-filter-3-4-inch-flow|https://spatco.com//assets/products/images/40510D.jpg|in stock|38.82 USD|1.5 lb|PetroClear||new|no| 40530P-AD|40530P-AD|Petro Clear 40530P-AD 30-Micron Particulate Removing Filter, 1-Inch Flow|PetroClear® model 40530P-AD is a particulate removing spin-on filter designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed for particulate removal only and WILL NOT REACT TO WATER IN FUELS OR PHASE SEPARATION IN ETHANOL BLENDED GASOLINE TO SLOW FLOW. This filter offers efficient 30 micron (nominal) particulate removal. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. |https://spatco.com/shop/products/petro-clear-40530p-ad-30-micron-particulate-removing-filter-1-inch-flow|https://spatco.com//assets/products/images/40530P-AD.jpg|in stock|17.52 USD|3 lb|PetroClear||new|no| 40510D-AD|40510D-AD|Petro Clear 40510D-AD 10-Micron Phase Separation Water Sensing Filter, 1-Inch Flow|PetroClear® model 40510D-AD is a water sensing and phase separation detecting spin-on filter designed to remove particulate from neat gasoline or Ethanol blended gasoline. This is a particulate removing, phase separation and water sensing spin-on filter. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline. This filter is also designed to detect and react to phase separation. Slow flow is an indicator of the presence of phase separation in Ethanol blended gasoline. This filter offers efficient 10 micron (nominal) particulate removal, and senses both free and emulsified water in neat gasoline and detects and reacts to phase separation should it occur, significantly reducing the flow. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL® recognized. This patented dual filter from Champion Laboratories, Inc. protects during the transition from neat gasoline to ethanol blends without changing filters. |https://spatco.com/shop/products/petro-clear-40510d-ad-10-micron-phase-separation-water-sensing-filter-1-inch-flow|https://spatco.com//assets/products/images/40510D-AD.jpg|in stock|30.45 USD|3 lb|PetroClear||new|no| GE04|GE04|Gasoila Chemicals GE04 4-Ounce Gasoila E-Seal Thread Sealant with Brush|• Non-hardening, non-toxic, opaque, dark green paste designed specifically for ethanol blended gasoline including E10 and E85 (for 100% ethanol or 100% methanol applications - use Gasoila 100).• Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, pump assemblies, oil burners, hydraulics, bolts, compressors, engines, motors, fuel lines and couplings.• For use on brass, copper, stainless steel, aluminum, black pipe, tin and galvanized pipe.• Excellent resistance to gasoline, ethanol blended gasoline such as E10 and E85, petroleum solvents, kerosene diesel oil, BioDiesel propane, jet fuels, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam and potable water.• NOT for use on oxygen.|https://spatco.com/shop/products/gasoila-chemicals-ge04-4-ounce-gasoila-e-seal-thread-sealant-with-brush|https://spatco.com//assets/products/images/GE04.jpg|in stock|14.89 USD|0.5 lb|Gasoila Chemicals||new|no| M14620K001GEN|M14620K001GEN|Gilbarco Rebuilt 10.4-Inch Color Display Assembly|This replacement kit is used in the Encore 700S series fuel dispenser. Used as alternative to Gilbarco p/n M14620K001.|https://spatco.com/shop/products/generic-10-4-inch-color-display-assembly|https://spatco.com//assets/products/images/M14620K001.jpg|in stock|1122.65 USD|6 lb|Gilbarco||new|no| 330734-001R|330734-001R|Veeder Root 330734-001 Refurbished Printed Circuit Board Power Supply|Refurbished power supply board for the TLS-350, TLS-350 Plus, and the TLS-350R series consoles.|https://spatco.com/shop/products/veeder-root-330734-001-refurbished-printed-circuit-board-power-supply|https://spatco.com//assets/products/images/330734-001.jpg|in stock|365 USD|1.25 lb|Veeder Root||new|no| 005-300825-R|005-300825-R|Wayne 005-300825- Rebuilt ISB Assembly (Intrinsic Barrier) iGEM|Rebuilt Wayne iGEM Intrinsically Safe Barrier Board for Ovation and 3/Vista Dispensers. iGEM without Automatic Temperature Compensation (ATC).|https://spatco.com/shop/products/wayne-005-300825-rebuilt-isb-assembly-intrinsic-barrier-igem|https://spatco.com//assets/products/images/005-300825.jpg|in stock|252.5 USD|1.05 lb|Wayne||new|no| M13832A001R|M13832A001R|Hengstler M13832A001R USB CRIND Printer - Refurbished|This refurbished replacement CRIND printer is used in the Encore 500S/700S fuel dispenser. Does not include paper tray.|https://spatco.com/shop/products/gilbarco-m13832a001-usb-crind-printer-refurbished|https://spatco.com//assets/products/images/M13832A001.jpg|in stock|469.23 USD|1.25 lb|Hengstler||new|no| 330020-620R|330020-620R|Veeder-Root 330020-620R Universal Input/Output Interface Board - Refurbished|This is a refurbished replacement part for the TLS-450PLUS and TLS-450 series consoles Digital Presurized Line Leak Detector (DPLLD).|https://spatco.com/shop/products/veeder-root-330020-620r-universal-input-output-interface-board-refurbished|https://spatco.com//assets/products/images/330020-620.jpg|in stock|1423.08 USD|1.7 lb|Veeder Root||new|no| 124291C|124291C|Irpco 124281C Hardwall Steelflex 3/4-Inch x 8-Foot, 6-Inch Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end.TUBE: Gasoline-resistant nitrileREINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-124291c-hardwall-steelflex-3-4-inch-x-8-foot-six-inch-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/124281C.jpg|in stock|61.78 USD|7 lb|Irpco|Black|new|no| WU003976-0001|WU003976-0001|Wayne WU003976-0001 10.4-Inch VGA LED Backlit Display Assembly|This replacement part is for the Wayne Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-wu003976-0001-10-4-inch-vga-led-backlit-display-assembly|https://spatco.com//assets/products/images/WU003976-0001.jpg|in stock|1797.05 USD|6 lb|Wayne||new|no| M14370K002R|M14370K002R|Gilbarco M14370K002 Ecometer Field Kit with Black Connector - REBUILT|The Ecometer is the retail fueling industrys most accurate metering device. Its patented design and advanced technology provide precise fuel measurement, minimizing fuel losses. The Ecometer can be fitted to almost all of Gilbarco Veeder-Roots dispenser range.|https://spatco.com/shop/products/gilbarco-m14370k002-ecometer-field-kit-with-black-connector-rebuilt|https://spatco.com//assets/products/images/M14370K002.jpg|in stock|1789.19 USD|12 lb|Gilbarco|Black|new|no| WU017880-0001|WU017880-0001|Wayne WU017880-0001 Cash-Only PPU LCD Module|This replacement part is for the Wayne Ovation fuel dispenser. Use in place of p/n WU003355-0001.|https://spatco.com/shop/products/wayne-wu017880-0001-cash-only-ppu-lcd-module|https://spatco.com//assets/products/images/WU003355-0001.jpg|in stock|86.15 USD|8 lb|Wayne||new|no| M149-111-00NAAR|M149-111-00NAAR|Verifone M149-111-00-NAAR Commander Site Controller - REBUILT|Commander Site Controller from Verifone offers convenience store owners a versatile site management solution providing increased speed in payment acceptance, fueling operations, and back office store control. Commander features the Commander Console, a cloud based management software platform. This platform allows owners to manage all aspects of their business from fuel to payment and store operations quickly and easily from any web enabled device. This is a rebuilt unit. Refund of $1428.50 with return of core.|https://spatco.com/shop/products/verifone-m149-111-00-naar-commander-site-controller|https://spatco.com//assets/products/images/M149-111-00NAAR.jpg|in stock|2850 USD|24.35 lb|Verifone||new|no| M169-500-01-NAAR|M169-500-01-NAAR|Verifone M169-500-01-NAAR RUBYCI Console - REBUILT|RubyCi is a functional site controller and point of sale workstation in one piece of hardware providing fast, efficient, complete store management. The combination of POS and site controller makes this solution the only one of its kind in the marketplace. Now, site owners have the ability to consolidate as well as upgrade their operating technology at the same time. This is a rebuilt unit. Refund of $2142.50 with return of core.|https://spatco.com/shop/products/verifone-m169-500-01-naar-rubyci-console|https://spatco.com//assets/products/images/M169-500-01-NAAR.jpg|in stock|3536 USD|30 lb|Verifone||new|no| 68EZR-1010|68EZR-1010|OPW 68EZR-1010 1-inch Dry Reconnectable Breakaway|The OPW 68EZR Reconnectable Breakaway has been designed for retail fueling operations to deliver an increased level of security in the event of a drive off. Not only is it the fastest and easiest breakaway in the industry to reconnect, but also the one that delivers the greatest peace of mind that it is securely reconnected. Built on the 66REC breakaway technology platform, the 68EZR delivers trusted OPW quality and proven technology at the lowest cost of ownership. The 68EZR is installed on fuel dispensing hoses and will separate when subjected to a designated pull force. Upon separation, the dual valves seat automatically, stopping the fl ow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. For proper operation on high-hanging hoses, the OPW 68EZR must always be installed with a “straightening” hose, such as the OPW 66H. For low hose applications, the OPW 68EZR should be installed downstream of the retractor cable.|https://spatco.com/shop/products/opw-68ezr-1010-1-inch-dry-reconnectable-breakaway|https://spatco.com//assets/products/images/68EZR-1010.jpg|in stock|125.23 USD|4 lb|OPW||new|no| WM046966-0001|WM046966-0001|Wayne WM046966-0001- O-ring, T=3.53 ID=23.4|Sealing ring.|https://spatco.com/shop/products/wayne-wm046966-0001-o-ring|https://spatco.com//assets/products/images/005-905817.JPG|in stock|4.83 USD|0.05 lb|Wayne||new|no| M07588A002R|M07588A002R|Gilbarco Gasboy M07588A002 Gasboy Atlas 9800 115v, Power Supply without Battery - Rebuilt|This is a rebuilt replacement Gasboy Atlas 9800 Power Supply Assembly.|https://spatco.com/shop/products/gilbarco-gasboy-m07588a002-gasboy-atlas-9800-115v-power-supply-without-battery-rebuilt|https://spatco.com//assets/products/images/M07588A002.jpg|in stock|407.15 USD|1.5 lb|Gilbarco||new|no| M169-500-01-NAA|M169-500-01-NAA|Verifone M169-500-01-NAA RUBYCI Console|RubyCi is a functional site controller and point of sale workstation in one piece of hardware providing fast, efficient, complete store management. The combination of POS and site controller makes this solution the only one of its kind in the marketplace. Now, site owners have the ability to consolidate as well as upgrade their operating technology at the same time.|https://spatco.com/shop/products/verifone-m169-500-01-naa-rubyci-console|https://spatco.com//assets/products/images/no-image.png|in stock|4857.14 USD|30 lb|Verifone||new|no| 330020-795|330020-795|Veeder Root 330020-795 TLS-450PLUS CPU Board Kit|This is a replacement CPU board for the TLS-450PLUS series console.|https://spatco.com/shop/products/veeder-root-330020-750-tls-450plus-cpu-board-kit|https://spatco.com//assets/products/images/330020-795.jpg|in stock|4814.77 USD|4 lb|Veeder Root||new|no| 331500-308|331500-308|Veeder Root 331500-308 Upgrade Software and New ECPU2|This part is for software version 23 and earlier. Used in the TLS-350 Plus, TLS-350R, and TLS-350J series consoles.|https://spatco.com/shop/products/veeder-root-331500-308-upgrade-software-and-new-ecpu2|https://spatco.com//assets/products/images/331500-308.jpg|in stock|4274.29 USD|3 lb|Veeder Root||new|no| PA025800T1EMV|PA025800T1EMV|Gilbarco PA025800T1EMV Gilbarco Security Module for Exxon/Mobile|This unit provides DES encryption for up to 16 CRINDs.|https://spatco.com/shop/products/gilbarco-pa025800t1emv-gilbarco-security-module-for-exxon-mobile|https://spatco.com//assets/products/images/PA025800T1EMV.jpg|in stock|2039 USD|8 lb|Gilbarco||new|no| PA0258000TBPA|PA0258000TBPA|Gilbarco PA0258000TBPA Gilbarco Security Module for BP|This unit provides DES encryption for up to 16 CRINDs.|https://spatco.com/shop/products/gilbarco-pa0258000tbpa-gilbarco-security-module-for-bp|https://spatco.com//assets/products/images/PA0258000TBPA.jpg|in stock|1938.35 USD|6 lb|Gilbarco||new|no| WU005346-0001|WU005346-0001|Wayne WU005346-0001 Wayne Connect In-Store Router (IP-485/S)|This replacement kit is part of the Wayne Connect IP-485 Network Solution.|https://spatco.com/shop/products/wayne-wu005346-0001-wayne-connect-in-store-router-ip-485-s|https://spatco.com//assets/products/images/WU005346-0001.jpg|in stock|3661.7 USD|10.85 lb|Wayne||new|no| M10008K004|M10008K004|Gilbarco M10008K004 DEF Hose Cover|This flap door kit is backward compatible with the DEF nozzle door hose flap cover, model # M11997A002.|https://spatco.com/shop/products/gilbarco-m10008k004-def-hose-cover|https://spatco.com//assets/products/images/M10008K004.jpg|in stock|2587.5 USD|27 lb|Gilbarco||new|no| M10662K001|M10662K001|Gilbarco M10662K001 Encrypted 2.1 Pinpad Kit|This replacement kit is used in the Encore Advantage fuel dispenser.|https://spatco.com/shop/products/gilbarco-m10662k001-encrypted-2-1-pinpad-kit|https://spatco.com//assets/products/images/M10662K001.jpg|in stock|1792.05 USD|0.85 lb|Gilbarco||new|no| PA02610000022R|PA02610000022R|PA02610000022R Universal Dual PCB Distribution Box - Rebuilt|Third-party replacement part for the original Gilbarco unit. Does not come with the additional cables and accessories included with the original Gilbarco part, only the power cord.|https://spatco.com/shop/products/gilbarco-pa02610000022-universal-dual-pcb-distribution-box|https://spatco.com//assets/products/images/PA02610000022.jpg|in stock|548.34 USD|12 lb|Gilbarco||new|no| WU011879-0001-R|WU011879-0001-R|Wayne WU011879-0001 IX Secure CAT - JADE CPU Board|This refurbished kit is for the Wayne Ovation fuel dispenser. Refund of $391.67 with return of core.|https://spatco.com/shop/products/wayne-wu011879-0001-ix-secure-cat-jade-cpu-board|https://spatco.com//assets/products/images/WU011879-0001.jpg|in stock|1132.2 USD|7 lb|Wayne||new|no| T18815|T18815|Gilbarco T18815 Proportional Valve Kit|This replacement kit is used with the Advantage fuel dispensers. This kit includes installation o-rings and hardware. The coil is sold separately. ***SPECIAL PRICING WHILE SUPPLIES LAST***|https://spatco.com/shop/products/gilbarco-t18815-proportional-valve-kit|https://spatco.com//assets/products/images/T18815.jpg|in stock|450.01 USD|3.3 lb|Gilbarco||new|no| W2894021-001|W2894021-001|Wayne W2894021-001 iX Pay T7 Display Kit|This replacement display kit is used in the Wayne iX Pay T7 Secure Payment Terminal.|https://spatco.com/shop/products/wayne-w2894021-001-ix-pay-t7-display-kit|https://spatco.com//assets/products/images/W2894021-001.jpg|in stock|1813.22 USD|1.3 lb|Wayne||new|no| W2894026-001|W2894026-001|Wayne W2894026-001 Secure Hybrid Card Reader (P90) with Gasket|This replacement card reader is for the Wayne iX Pay T7 terminal.|https://spatco.com/shop/products/wayne-w2894026-001-secure-hybrid-card-reader-p90-with-gasket|https://spatco.com//assets/products/images/W2894026-001.jpg|in stock|1301.69 USD|1.75 lb|Wayne||new|no| WU001585-0002|WU001585-0002|Wayne WU001585-0002 Nova-Atom CPU Board|This is a replacement mother board for the Wayne Fusion Forecourt System.|https://spatco.com/shop/products/wayne-wu001585-0002-nova-atom-cpu-board|https://spatco.com//assets/products/images/WU001585-0002.jpg|in stock|1429.42 USD|1.05 lb|Wayne||new|no| 1C-3132P|1C-3132P|OPW IC-3132P Five-Gallon EDGE Double-Wall Spill Container with Cast Iron Cover, Electronic Sensor Access Port, OPW Electronic Sensor and Drain Plug|Designed in collaboration with contractors and end-users, the NEW OPW EDGE Double Wall Spill Container installs in the same space as single wall buckets. The EDGE delivers best-in-class features that significantly improve reliability, installation, testing and serviceability-ease. The EDGE exceeds the performance levels of all other double wall spill containers.|https://spatco.com/shop/products/opw-ic-3132p-five-gallon-edge-double-wall-spill-container-with-cast-iron-cover-electronic-sensor-access-port-opw-electronic-sensor-and-drain-plug|https://spatco.com//assets/products/images/1C-3132P.jpg|in stock|1861.56 USD|115 lb|OPW||new|no| 890110-001-R|890110-001-R|Wayne 890110-001-R 10.4-Inch VGA Ovation Display Assembly|Replacement VGA Display for Ovation Fuel Dispenser. (Alternate Part No. WU003976-0001)|https://spatco.com/shop/products/wayne-890110-001-r-10-4-inch-vga-ovation-display-assembly|https://spatco.com//assets/products/images/890110-001-R.jpg|in stock|1108.63 USD|2.2 lb|Wayne||new|no| 848480-003|848480-003|Veeder Root 848480-003 Electronic Pressurized Line Leak Detector with Swift Check Valve|Following the industrys best practices, a containment sensor is recommended for sites with Pressureized Line Leak Detection (PLLD) in the event that the submersible pump develops a leak before the check valve and/or functional element. Line leak detectors only check leaks in the primary product line downstream from the pump.|https://spatco.com/shop/products/veeder-root-848480-003-electronic-pressurized-line-leak-detector-with-swift-check-valve|https://spatco.com//assets/products/images/848480-003.jpg|in stock|1704 USD|15 lb|Veeder Root||new|no| 61FSTOP-1000|61FSTOP-1000|OPW 61FSTOP-1000 The Stopper Overfill Prevention Valve|The OPW 61ƒSTOP Overfill Prevention Valve (The Stopper) is designed to prevent overfilling of aboveground storage tanks by providing a positive shut-off during a pressurized-fill (pump-on fill) delivery.|https://spatco.com/shop/products/opw-61fstop-1000-the-stopper-overfill-prevention-valve|https://spatco.com//assets/products/images/61FSTOP-1000.jpg|in stock|1285.73 USD|15 lb|OPW||new|no| 39CD-PL10|39CD-PL10|OPW 39CD-PL10 39-1/2-Inch Grey Plain Cover Conquistador Manhole with Recess Handle|Lightweight and extremely durable, composite cover manholes make sump accessibility safer and easier than ever before. Designed for use in many service station, commercial and industrial driveway applications, these manholes offer a wide variety of features to ensure the ultimate in user-friendly convenience and long-lasting performance. The Conquistador Duratuff helps put an end to the risk of back, foot and hand injuries with a slip-resistant tread pattern and lightweight, low-profile construction for easier and safer access to tank sumps and other underground equipment.|https://spatco.com/shop/products/opw-39cd-pl10-39-1-2-inch-grey-plain-cover-manhole-with-recess-handle|https://spatco.com//assets/products/images/39CD-PL10.jpg|in stock|1216.44 USD|210 lb|OPW|Grey|new|no| 1C-3112P|1C-3112P|OPW 1C-3112P Five-Gallon EDGE Double-Wall Spill Container with Cast Iron Cover and Drain Plug|Designed in collaboration with contractors and end-users, the NEW OPW EDGE Double Wall Spill Container installs in the same space as single wall buckets. The EDGE delivers best-in-class features that significantly improve reliability, installation, testing and serviceability-ease. The EDGE exceeds the performance levels of all other double wall spill containers. |https://spatco.com/shop/products/opw-1c-3112p-five-gallon-edge-double-wall-spill-container-with-cast-iron-cover-and-drain-plug|https://spatco.com//assets/products/images/1C-3112P.jpg|in stock|1088.42 USD|125 lb|OPW||new|no| 329356-002|329356-002|Veeder Root 329356-002 Four-Input Tank Probe Interface Module for TLS-350|This interface module is for the TLS-350 series. There is a maximum of three per TLS-350, TLS-350 Plus, and TLS-350R console. This module includes a terminal connector for one ground temperature thermistor for the volumetric line leak detector. Feature Compatibility: Series 8473 0.1 GPH Magnetostrictive ProbeSeries 8463 0.1 GPH Mag Plus Magnetostrictive Probe|https://spatco.com/shop/products/veeder-root-329356-002-four-input-tank-probe-interface-module-for-tls-350|https://spatco.com//assets/products/images/329356-002.jpg|in stock|1896 USD|2 lb|Veeder Root||new|no| 71SO-410C|71SO-410C|OPW 71SO-410C Vapor-Tight Overfill Valve, 10-Foot Bury Depth, 10-Foot Tank Diameter|The OPW 71SO vapor-tight Overfill Prevention Valve is designed to prevent the overfill of underground storage tanks by providing a positive shut-off of product delivery. The shut-off valve is an integral part of the drop tube used for gravity filling. The OPW 71SO allows easy installation (without breaking concrete) and requires no special manholes. The OPW 71SO is a vapor-tight two-stage shut-off valve. When the liquid level rises to about 95% of tank capacity, the valve mechanism is released, closing automatically with the flow. This reduces the flow rate to approximately 5 gpm through a bypass valve. The operator may then stop the filling process and disconnect and drain the delivery hose. As long as the liquid exceeds the 95% level, the valve will close automatically each time delivery is attempted. If the delivery is not stopped and the liquid rises to about 98% of tank capacity, the bypass valve closes completely. No additional liquid can flow into the tank until the level drops below a reset point.|https://spatco.com/shop/products/opw-71so-410c-vapor-tight-overfill-valve-10-foot-bury-depth-10-foot-tank-diameter|https://spatco.com//assets/products/images/71SO-410C.jpg|in stock|865.24 USD|190 lb|OPW||new|no| M06333KECAL|M06333KECAL|Gilbarco Gasboy M06333KECAL ATLAS 9800 CPU|This is a replacement CPU board for the Gasboy Atlas fuel dispenser.|https://spatco.com/shop/products/gilbarco-gasboy-m06333kecal-atlas-9800-cpu|https://spatco.com//assets/products/images/M06333KECAL.jpg|in stock|1013.94 USD|4 lb|Gilbarco||new|no| 794380-352|794380-352|Veeder Root 794380-352 Discriminating Containment Sump Sensor|This sensor can quickly and accurately detect the presence of hydrocarbons or fluids and differentiate between the two, with Veeder-Root’s dispenser pan and containment sump sensors. Alarm conditions, Fuel, Liquid Warning, High Liquid Alarm, Sensor Out – trigger an audible alarm. A displayed and printed message also appears on the TLS-350R or TLS-350, and they are recorded in their History Alarm Report. Durable and accurate, with no moving parts to wear out or stick, these sensors withstand harsh environments, continuing to detect fluid or hydrocarbons even in freezing temperatures. The housing is constructed of polyester, the sensing element a conductive elastomer, and it can be reused after an alarm is sensed without degradation. |https://spatco.com/shop/products/veeder-root-794380-352-discriminating-containment-sump-sensor|https://spatco.com//assets/products/images/794380-352.jpg|in stock|1279 USD|6 lb|Veeder Root||new|no| 71SO-400C|71SO-400C|OPW 71SO-400C Vapor-Tight Overfill Valve, 5-Foot Bury Depth, 8-Foot Tank Diameter|The CARB-certified OPW 71SO-400C vapor-tight Overfill Prevention Valve is designed to prevent the overfill of underground storage tanks by providing a positive shut-off of product delivery. The shut-off valve is an integral part of the drop tube used for gravity filling. The OPW 71SO allows easy installation (without breaking concrete) and requires no special manholes. The OPW 71SO-400C is a vapor-tight two-stage shut-off valve. When the liquid level rises to about 95% of tank capacity, the valve mechanism is released, closing automatically with the flow. This reduces the flow rate to approximately 5 gpm through a bypass valve. The operator may then stop the filling process and disconnect and drain the delivery hose. As long as the liquid exceeds the 95% level, the valve will close automatically each time delivery is attempted. If the delivery is not stopped and the liquid rises to about 98% of tank capacity, the bypass valve closes completely. No additional liquid can flow into the tank until the level drops below a reset point. |https://spatco.com/shop/products/opw-71so-400c-non-vapor-tight-overfill-valve-5-foot-bury-depth-8-foot-tank-diameter|https://spatco.com//assets/products/images/71SO-400C.jpg|in stock|733.33 USD|50 lb|OPW||new|no| 71SO-4000|71SO-4000|OPW 71SO-4000 Non Vapor-Tight Overfill Valve, 5-Foot Bury Depth, 8-Foot Tank Diameter|The OPW 71SO-4000 non vapor-tight Overfill Prevention Valve is designed to prevent the overfill of underground storage tanks by providing a positive shut-off of product delivery. The shut-off valve is an integral part of the drop tube used for gravity filling. The OPW 71SO allows easy installation (without breaking concrete) and requires no special manholes. The OPW 71SO-4000 is a non vapor-tight two-stage shut-off valve. When the liquid level rises to about 95% of tank capacity, the valve mechanism is released, closing automatically with the flow. This reduces the flow rate to approximately 5 gpm through a bypass valve. The operator may then stop the filling process and disconnect and drain the delivery hose. As long as the liquid exceeds the 95% level, the valve will close automatically each time delivery is attempted. If the delivery is not stopped and the liquid rises to about 98% of tank capacity, the bypass valve closes completely. No additional liquid can flow into the tank until the level drops below a reset point. |https://spatco.com/shop/products/opw-71so-4000-vapor-tight-overfill-valve-5-foot-bury-depth-8-foot-tank-diameter|https://spatco.com//assets/products/images/71SO-4000.jpg|in stock|972.3 USD|70 lb|OPW||new|no| 331014-001|331014-001|Veeder Root 331014-001 Swiftcheck Valve for DPLLD System|This is a replacement part for the TLS-450PLUS and TLS-450 series consoles Digital Presurized Line Leak Detector (DPLLD). This part installs in the pumps mechanical leak detector port.|https://spatco.com/shop/products/veeder-root-331014-001-swiftcheck-valve-for-dplld-system|https://spatco.com//assets/products/images/331014-001.jpg|in stock|1176 USD|3.8 lb|Veeder Root||new|no| 794380-303|794380-303|Veeder Root 794380-303 Dual-Point Hydrostatic Reservoir Sensor|Accurately detect fluid-level changes in double-walled storage tanks in high or low water tables. Veeder-Root’s Hydrostatic Reservoir Dual-Float Sensors are ideal for high groundwater areas, differentiating between high- and low-level alarm conditions. If the brine solution seeps into the tank, lowering the level in the reservoir, the sensor triggers a low-level alarm. If an outer wall leak occurs and groundwater seeps into the tank, a high alarm is activated. Meets California’s requirement for secondary space monitoring for tanks as required by AB 2481. Withstands removal from reservoir several times a year without sensor damage. Clear plastic housing for visual inspection or float operation.|https://spatco.com/shop/products/veeder-root-794380-303-dual-point-hydrostatic-reservoir-sensor|https://spatco.com//assets/products/images/794380-303.jpg|in stock|1062.41 USD|5 lb|Veeder Root||new|no| M12760A001|M12760A001|Gilbarco M12760A001 Hub Interface Printed Circuit Assembly|This replacement kit is used in the Encore 700S series fuel dispenser.|https://spatco.com/shop/products/gilbarco-m12760a001-hub-interface-printed-circuit-assembly|https://spatco.com//assets/products/images/M12760A001.jpg|in stock|808.23 USD|1.3 lb|Gilbarco||new|no| 859080-001|859080-001|Veeder Root 859080-001 Electronic Pressurized Line Leak Detector without Swift Check Valve|Following the industrys best practices, a containment sensor is recommended for sites with Pressureized Line Leak Detection (PLLD) in the event that the submersible pump develops a leak before the check valve and/or functional element. Line leak detectors only check leaks in the primary product line downstream from the pump.|https://spatco.com/shop/products/veeder-root-859080-001-electronic-pressurized-line-leak-detector-without-swift-check-valve|https://spatco.com//assets/products/images/859080-001.jpg|in stock|1080 USD|6 lb|Veeder Root||new|no| M14059A001|M14059A001|Gilbarco M14059A001 Control Board PCA, GSOM Assembly|This is a replacement Gilbarco System on Module (GSOM).|https://spatco.com/shop/products/gilbarco-m14059a001-control-board-pca-gsom-assembly|https://spatco.com//assets/products/images/M14059A001.jpg|in stock|1741.6 USD|0.6 lb|Gilbarco||new|no| 794380-322|794380-322|Veeder Root 794380-322 Discriminating Dispenser Pan Sensor|This type of discriminating sensor is installed in a dispenser pan and will detect the presence of, and differentiate between, hydrocarbons and other liquids.|https://spatco.com/shop/products/veeder-root-794380-322-discriminating-dispenser-pan-sensor|https://spatco.com//assets/products/images/794380-322.jpg|in stock|1156.27 USD|2 lb|Veeder Root||new|no| M149-901-01-R|M149-901-01-R|Verifone M149-901-01-R Forecourt Interface Control Box|The Forecourt Interface Box connects the Commander Site Controller to dispensers and card readers. There is support for VeriFone SPP, Gilbarco CRIND, and Wayne CAT.|https://spatco.com/shop/products/verifone-m149-901-01-r-forecourt-interface-control-box|https://spatco.com//assets/products/images/M149-901-01-R.jpg|in stock|530.36 USD|15.35 lb|Verifone||new|no| M12514K001|M12514K001|Gilbarco M12514K001 Encrypted Pulser Kit|Each kit includes a pair of encrypted pulsers, mounting hardware, and installation instructions. This kit is good for U.S. Encore 500, Encore 500S, and Encore 700 dispensers manufactured after June 2003. The pulser prevents fuel theft with a lift-off detection encrypted communication unique ID hardend enclosure.|https://spatco.com/shop/products/gilbarco-m12514k001-encrypted-pulser-kit|https://spatco.com//assets/products/images/M12514K001.jpg|in stock|889.4 USD|2.6 lb|Gilbarco||new|no| 330020-720|330020-720|Veeder-Root 330020-720 Four-Inch Mag Plus Replacement Float Kit|This kit includes:1 Cable, 5 feet long (standard size) (330272-001)1 4-inch Product Float (331719-001)1 4-inch Water Float (331718-00X)1 Boot (333202-001)2 Canister Spacer Rings (331555-001)1 Cable Seal Kit (CSK) (330020-067)|https://spatco.com/shop/products/veeder-root-330020-720-four-inch-mag-plus-replacement-float-kit|https://spatco.com//assets/products/images/330020-720.jpg|in stock|892.29 USD|2 lb|Veeder Root||new|no| 1C-2100-DEVR|1C-2100-DEVR|OPW 1C-2100-DEVR Threaded, Five-Gallon, Fill/Spill Containment Manhole Duratuff II Base with Cast Iron Cover and Drain Valve|OPW Spill Containment Manholes are designed to prevent spilled product from entering the soil near the fill and vapor return riser connections on underground storage tanks during normal tank filling operation, or in the event of tank overfill. The spill containers catch spillage to help prevent soil contamination and groundwater pollution. OPW Thread-On Spill Containment Manholes are generally used on new tank or riser pipe installations.|https://spatco.com/shop/products/opw-1c-2100-devr-threaded-five-gallon-fill-spill-containment-manhole-duratuff-ii-base-with-cast-iron-cover-and-drain-valve|https://spatco.com//assets/products/images/1C-2100-DEVR.jpg|in stock|685.31 USD|42 lb|OPW||new|no| 410648-001|410648-001|Red Jacket 410648-001 Magnetic Starter (3 phase, 120 volt coil)|Replacement part for the Red Jacket DEF Pump System. This replacement part is the equivalent to the Maxxum magnetic starter.|https://spatco.com/shop/products/red-jacket-410648-001-magnetic-starter-3-phase-120-volt-coil|https://spatco.com//assets/products/images/410648-001.jpg|in stock|754.51 USD|10 lb|Red Jacket||new|no| 889952-003-080|889952-003-080|Wayne 889952-003-080 Push-to-Start Ovation Panel Assembly|This is a replacement Push-to-Start panel for Ovation fuel dispensers.|https://spatco.com/shop/products/wayne-889952-003-080-push-to-start-ovation-panel-assembly|https://spatco.com//assets/products/images/889952-003-080.jpg|in stock|699.58 USD|1.95 lb|Wayne||new|no| 889952-002-001|889952-002-001|Wayne 889952-002-001 Two-Product Push to Start Panel for Sams Ovation Fuel Dispensers|Made to replace Ovation SAMS two-products overlay.|https://spatco.com/shop/products/wayne-889952-002-001-two-product-push-to-start-panel-for-sams-ovation-fuel-dispensers|https://spatco.com//assets/products/images/889952-002-001.jpg|in stock|553.67 USD|1.95 lb|Wayne||new|no| 794390-420|794390-420|Veeder Root 794390-420 Non-Discriminating Interstitial Steel Tank Sensor with 16 Cable|Detect dangerous leaks in double-walled steel tanks. The presence of liquid in the interstitial space of double-walled tanks triggers an alarm in a TLS-450, TLS-350R, TLS-350, TLS-350J, ILS-350, TLS-300i or TLS-300C monitor. The visual and audible alarm tells you immediately where the problem is so you take quick and efficient action to help prevent safety and environmental issues. The TLS-450, TLS-350R, TLS-350, TLS-350J, ILS-350, TLS-300i or TLS-300C. TLS-250i and ILS-250 can also trigger an on-site alarm for even greater warning capability. |https://spatco.com/shop/products/veeder-root-794390-420-non-discriminating-interstitial-steel-tank-sensor-with-16-cable|https://spatco.com//assets/products/images/794390-420.jpg|in stock|800 USD|13 lb|Veeder Root||new|no| 794390-409|794390-409|Veeder Root 794390-409 Non-Discriminating Interstitial Fiberglass Tank Sensor|Detect dangerous leaks in fiberglass tank’s interstitial walls. Veeder-Root’s Interstitial Sensor detects the presence of liquid between the double wall of fiberglass tanks. Liquid triggers an alarm signal to your TLS-450 Series, TLS4 Series, TLS-350 Series, and TLS-300 Series. You’ll know immediately where the problem is so you can take swift action to prevent serious and costly safety and environmental problems. This sensor is for 4’ to 12’ diameter fiberglass tanks. The Series 7943 Interstitial Fiberglass Tank Sensor is compatible with the following consoles: TLS-450, TLS-350R*, TLS-350*, ILS-350**, TLS-300i, TLS-300C, TLS-300C, TLS-250i, and ILS-250. *An Interstitial Sensor Interface Module is required for use of the Interstitial Fiberglass Tank Sensor with the TLS-350 console**A Two-Wire Module is required for use of the Interstitial Fiberglass Tank Sensor with teh ILS-350 console|https://spatco.com/shop/products/veeder-root-794390-409-non-discriminating-interstitial-fiberglass-tank-sensor|https://spatco.com//assets/products/images/794390-409.jpg|in stock|700 USD|3 lb|Veeder Root||new|no| M01414B001|M01414B001|Gilbarco M01414B001 Base Rail Hydraulic Frame|This is a replacement base rail for the Encore fuel dispenser.|https://spatco.com/shop/products/gilbarco-m01414b001-base-rail-hydraulic-frame|https://spatco.com//assets/products/images/M01414B001.jpg|in stock|668.62 USD|12 lb|Gilbarco||new|no| WU002840|WU002840|WU002840 Generic 10.4-Inch Color Display for Wayne Ovation|This replacement color display is for the Wayne Ovation fuel dispenser. Generic|https://spatco.com/shop/products/wayne-wu002840gen-10-4-inch-color-display-for-wayne-ovation|https://spatco.com//assets/products/images/WU002840GEN.jpg|in stock|465.1 USD|1.85 lb|Wayne||new|no| 1290-0050|1290-0050|OPW 1290-0050 Bulk Fueling, Automatic Shut-Off, 1291C-ULC-Approved, Nozzle|For Heavy-Duty, High-Flow Truck, Bus and Home Fuel Oil Delivery Service. Venturi-Type Shut-Off Mechanism for automatic shut-off. |https://spatco.com/shop/products/opw-1290-0050-bulk-fueling-automatic-shut-off-1291c-ulc-approved-nozzle|https://spatco.com//assets/products/images/1290-0050.jpg|in stock|507.27 USD|8 lb|OPW||new|no| 849600-001|849600-001|Veeder Root 849600-001 4-Inch Float, Standard Mag Probe, Diesel Installation Kit|This kit is used with diesel fuel systems. The kit includes a product float, water float, boot, two 3/4 inch adjustable adapters, and five-foot cable.|https://spatco.com/shop/products/veeder-root-849600-001-4-inch-float-standard-mag-probe-diesel-installation-kit|https://spatco.com//assets/products/images/849600-001.jpg|in stock|655.71 USD|11 lb|Veeder Root||new|no| 849600-000|849600-000|Veeder Root 849600-000 4-Inch Float, Mag One Probe, Gasoline Installation Kit|Compatible with Mag Plus probes. Used in system to detect in-tank leaks, ensure integrity of the fuel and manage inventory.|https://spatco.com/shop/products/veeder-root-849600-000-4-inch-float-mag-one-probe-gasoline-installation-kit|https://spatco.com//assets/products/images/849600-000.jpg|in stock|655.71 USD|4 lb|Veeder Root||new|no| T20490-G4|T20490-G4|Gilbarco T20490-G4 CRIND Printer Module Assembly|This replacement kit is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t20490-g4-crind-printer-module-assembly|https://spatco.com//assets/products/images/T20490-G4.jpg|in stock|400 USD|4.5 lb|Gilbarco||new|no| M09922K001|M09922K001|Gilbarco M09922K001 Ultra High Interface PCB Assembly with Ground Wire|This replacement kit is used in the Encore 500 fuel dispenser.|https://spatco.com/shop/products/gilbarco-m09922k001-ultra-high-interface-pcb-assembly-with-ground-wire|https://spatco.com//assets/products/images/M09922K001.jpg|in stock|602.97 USD|0.7 lb|Gilbarco||new|no| 891185-001|891185-001|Wayne 891185-001 Barcode Scanner PCB Assembly|Replacement Printed Circuit Board for use with Vista3 and Ovation series fuel dispensers.|https://spatco.com/shop/products/wayne-891185-001-barcode-scanner-pcb-assembly|https://spatco.com//assets/products/images/891185-001.jpg|in stock|504.1 USD|4 lb|Wayne||new|no| 22224-01|22224-01|Verifone Sapphire 22224-01 132W Power Supply|Replacement power supply for the VeriFone Sapphire site controller system. ***SPECIAL CLOSEOUT PRICING WHILE SUPPLIES LAST***|https://spatco.com/shop/products/verifone-sapphire-132w-power-supply|https://spatco.com//assets/products/images/22224-01.jpg|in stock|50.01 USD|3.3 lb|Verifone||new|no| 890770-001|890770-001|Wayne 890770-001 IX PCB with Graphics Accelerator|This IX board is compatible with the Dresser Wayne QVGA display. A graphics accelerator board is included.|https://spatco.com/shop/products/wayne-890770-001-ix-pcb-with-graphics-accelerator|https://spatco.com//assets/products/images/890770-001.jpg|in stock|377.75 USD|0.7 lb|Wayne||new|no| 29376-01|29376-01|Verifone 29376-01 Smart Fuel Controller RS485 Interface Kit|The Verifone Smart Fuel Controller RS485 8-Channel Interface Kit supports RS485 DCR communications between the Secure PumpPay terminal and the POS. The interface kit is mounted in the Smart Fuel Controller.|https://spatco.com/shop/products/verifone-29376-01-smart-fuel-controller-rs485-interface-kit|https://spatco.com//assets/products/images/29376-01.jpg|in stock|369.57 USD|0.4 lb|Verifone||new|no| M06725A001|M06725A001|Gilbarco Gasboy M06725A001 RS-485 Interface with Totalizer|Allows RS-485 communications between 9800 and a CFN System, TopKAT, or TopKAT PLUS Electronic System. - Compatible with 9852K, 9853K, 9850K, 9840K, 9852A/Q, 9853A/Q, 9840A/Q, 9822A/Q, 9823A/Q/K, 9862KX, 9872KX.- Compatible with 9800 CPU Boards (C06391, C06392, C06393, C06394, C06500, C06501, C06502, C06503, M05346A001, M05346A002, M05346A003, M05346A004, M06333KXXXX).- Can be used in place of previous 9800 RS-485 I/F Board C06389 and M05248A001.|https://spatco.com/shop/products/gilbarco-gasboy-m06725a001-rs-485-interface-with-totalizer|https://spatco.com//assets/products/images/M06725A001.jpg|in stock|393.86 USD|4 lb|Gilbarco||new|no| T20379-G4|T20379-G4|Gilbarco T20379-G4 Single-Line CRIND Display PCA Assembly|This replacement kit is used with the Advantage fuel dispeners.|https://spatco.com/shop/products/gilbarco-t20379-g4-single-line-crind-display-pca-assembly|https://spatco.com//assets/products/images/T20379-G4.jpg|in stock|179.83 USD|0.65 lb|Gilbarco||new|no| 29721-01|29721-01|Verifone 29721-01 Gilbarco Smart Fuel Controller Current Loop Board Kit|This Current Loop Board Kit supports both current loop and RS232 communications . (The old distribution board supports only the current loop communications interface.) The kit replaces the Smart Fuel Controllers existing distribution board. No change to the software configuration are required.|https://spatco.com/shop/products/verifone-29721-01-gilbarco-smart-fuel-controller-current-loop-board-kit|https://spatco.com//assets/products/images/29721-01.jpg|in stock|464.29 USD|4 lb|Verifone||new|no| WM041368-0002|WM041368-0002|Wayne WM041368-0002 Sales/Volume Complete PPU Display Module|This replacement part is for the Wayne Helix dispenser.|https://spatco.com/shop/products/wayne-wm041368-0002-sales-volume-complete-ppu-display-module|https://spatco.com//assets/products/images/WM041368-0002.jpg|in stock|409.07 USD|1.25 lb|Wayne||new|no| 846400-014|846400-014|Veeder Root 846400-014 Four-Inch Mag Plus Replacement Float Kit for Alternative Fluids with 10-Foot Cable|This kit includes:1 Cable, 10-foot long 1 4-inch Product Float 1 4-inch Water Float 1 Boot 2 Canister Spacer Rings 1 Cable Seal Kit (CSK)|https://spatco.com/shop/products/veeder-root-846400-014-four-inch-mag-plus-replacement-float-kit-for-alternative-fluids-with-10-foot-cable|https://spatco.com//assets/products/images/846400-014.jpg|in stock|492.57 USD|1 lb|Veeder Root||new|no| APT-TFA-400-II|APT-TFA-400-II|APT APT-TFA-400-II 4-Inch NPT Tank Fitting Adapter, Generation II|This tank fitting adapter provides a high quality, cost-effective way to mount tank sumps to a standard 4” NPT tank opening or 6” NPT tank opening. The bright zinc plated cast iron construction is not only strong, but corrosion-resistant. The TFA-400-II and TFA-600 are easy to install and their single hole style mounting allows sumps to be rotated to properly align pipe entries. - TFA-400-II fits onto a standard 4” NPT tank riser pipe with 4” NPT internal threads for mounting a submersible pump.- Installs through one hole in the sump base, permitting the sump to be rotated on the adapter to properly align pipe penetrations.- Compression ring design allows installation with a solid gasket ring to ensure a watertight seal and environmental security.|https://spatco.com/shop/products/apt-apt-tfa-400-ii-4-inch-npt-tank-fitting-adapter-generation-ii|https://spatco.com//assets/products/images/APT-TFA-400-II.jpg|in stock|285.44 USD|29 lb|APT||new|no| 28948-01-R|28948-01-R|Verifone 28948-01-R Power Supply for VeriFone V920 Viper Card Processing Server|Replacement power supply for the VeriFone V920 Viper card processing server.|https://spatco.com/shop/products/verifone-28948-01-r-power-supply-for-verifone-v920-viper-card-processing-server|https://spatco.com//assets/products/images/28948-01-R.jpg|in stock|233.09 USD|1.3 lb|Verifone||new|no| 330272-002|330272-002|Veeder-Root 330272-002 Ten-Foot TLS Tank Probe Cable|This replacement cable is for use with Veeder-Root Mag and Mag + Inventory Probes. It is also compatible with Mag Sump Sensors.|https://spatco.com/shop/products/veeder-root-330272-002-ten-foot-tls-tank-probe-cable|https://spatco.com//assets/products/images/330272-002.jpg|in stock|111 USD|1 lb|Veeder Root||new|no| W2893702-003|W2893702-003|Wayne W2893702-003 iMeter Proportional Valve with Pin|This replacement part is for the Wayne Ovation dispenser.|https://spatco.com/shop/products/wayne-w2893702-003-imeter-proportional-valve-with-pin|https://spatco.com//assets/products/images/W2893702-003.jpg|in stock|331.07 USD|2 lb|Wayne||new|no| 330020-796|330020-796|Veeder Root 330020-796 TLS-450PLUS Replacement SD Card Kit|This is a replacement SD Card for the TLS-450PLUS series console.|https://spatco.com/shop/products/veeder-root-330020-796-tls-450plus-replacement-sd-card-kit|https://spatco.com//assets/products/images/0330020-796.jpg|in stock|401.14 USD|3 lb|Veeder Root||new|no| TFA-4090|TFA-4090|OPW TFA-4090 4-Inch, No-Bolt Style, Tank Fitting Adaptor|This No-Bolt style mounting flange is used to mount FlexWorks tank sumps to 4 underground storage tank bung fittings and attaches to the bottom of the sump base to provide a secure and liquid tight connection. This model has compression studs for added stability and fast and easy installation with a socket wrench.|https://spatco.com/shop/products/opw-tfa-4090-4-inch-no-bolt-style-tank-fitting-adaptor|https://spatco.com//assets/products/images/TFA-4090.jpg|in stock|274.02 USD|26.55 lb|OPW||new|no| 100HB-100|100HB-100|Universal Valve 100HB-100 1-Inch OD Hosebun|This red hose retractor with yellow safety harness is used to prevent hose damage.|https://spatco.com/shop/products/universal-valve-100hb-100-1-inch-od-hosebun|https://spatco.com//assets/products/images/100HB-100.jpg|in stock|215.75 USD|3.1 lb|Universal Valve||new|no| M00454A002|M00454A002|Gilbarco M00454A002 Valve Coil Assembly|This part is used in Gilbarco Encore 300 Series dispensers with digital valves.|https://spatco.com/shop/products/gilbarco-m00454a002-valve-coil-assembly|https://spatco.com//assets/products/images/M00454A002.jpg|in stock|2382.75 USD|2 lb|Gilbarco||new|no| WM053972-0001|WM053972-0001|Wayne WM053972-0001 Price Control Board without PPUs|This replacement part is for the Wayne Ovation 2 dispenser.|https://spatco.com/shop/products/wayne-wm053972-0001-price-control-board-without-ppus|https://spatco.com//assets/products/images/WM053972-0001.jpg|in stock|316.02 USD|1.25 lb|Wayne||new|no| 48616|48616|Liquid Controls 48616 Packing Gland Kit|To be used with M/MA/MS Series Positive Displacement Meters. Fork drive, 24-tooth gear. Fork drive style includes pinion gears (1:1 and 2:1 ratios), drive coupling to field retrofit tapered rotor elements, and packing gland o-rings. After prolonged use, the packing gland may show leakage from the metering chamber. Leakage is a sign of wear, resulting from the type of product being metered, the operating temperature, and other system conditions. If the packing gland shows leakage, it should be replaced or repaired. |https://spatco.com/shop/products/liquid-controls-48616-packing-gland-kit|https://spatco.com//assets/products/images/48616.jpg|in stock|277.5 USD|6 lb|Liquid Controls||new|no| P040-07-506|P040-07-506|Verifone P040-07-506 Ruby Card|The Ruby Card is a memory card that allows you the flexibility to install options at any time. Features such as Car Wash, Proprietary Card, HPV-20 and Expanded PLUs, Money Order, Fast Food, and Ruby Easy ID can be installed on-site. Only one Ruby Card is needed per site except for HPV-20 functionality in which HPV-20 Workstation Ruby Cards (# P040-07-508) are required. ***SPECIAL CLOSEOUT PRICING WHILE SUPPLIES LAST***|https://spatco.com/shop/products/verifone-p040-07-506-ruby-card|https://spatco.com//assets/products/images/P040-07-506.jpg|in stock|125.01 USD|3 lb|Verifone||new|no| 26968-01-R|26968-01-R|Verifone 26968-01-R Compact Flash Drive - 512MB|Used with the VeriFone Sapphire site controller system.|https://spatco.com/shop/products/verifone-26968-01-r-compact-flash-drive-512mb|https://spatco.com//assets/products/images/26968-01-R.jpg|in stock|178.29 USD|0.05 lb|Verifone||new|no| 12VW-0100|12VW-0100|OPW 12VW-0100 Green Vacuum-Assist Vapor Recovery Hanging Nozzle|The OPW 12VW Series automatic nozzles are one of OPW’s premium nozzles for Vacuum-Assist vapor recovery systems. Designed with an integrated vapor-valve, they are certified on the most used vapor recovery systems in the world. The 12VW is the most trusted vapor recovery nozzle in the world for the applications it is certified on including Dresser/Wayne Wayne Vac, Gilbarco VaporVac, Schlumberger, and Vacurite.|https://spatco.com/shop/products/opw-12vw-0100-green-vacuum-assist-vapor-recovery-hanging-nozzle|https://spatco.com//assets/products/images/12VW-0100.jpg|in stock|271.66 USD|5 lb|OPW|Green|new|no| FSMM240200|FSMM240200|Hose Master FSMM240200 2-Inch Male x 2-Inch Male, 24-Inch Fire Shield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s unique process makes the difference by minimizing residual stress points created in the hose during the manufacturing process. Hose Master’s proprietary tube seam weld technology resists aromatic vapor permeation and Hose Master’s precise ASME certified welders follow specified procedures to insure the strongest fitting attachments. |https://spatco.com/shop/products/hose-master-fsmm240200-2-inch-male-x-2-inch-male-24-inch-fire-shield-flex-connector|https://spatco.com//assets/products/images/FSMM240200.jpg|in stock|170.81 USD|5.05 lb|Hose Master||new|no| TSP-IGF4|TSP-IGF4|Incon TSP-IGF4 4-Inch Float Set for Gasoline Tanks|Each float kit includes a product and water float. Order one float set for each LL2 Mag probe. - Product floats are white (clear)- Gasoline water floats are red.- Diesel water floats are blue|https://spatco.com/shop/products/incon-tsp-igf4-4-inch-float-set-for-gasoline-tanks|https://spatco.com//assets/products/images/TSP-IGF4.jpg|in stock|174.44 USD|0.7 lb|Incon||new|no| 891132-001|891132-001|Wayne 891132-001 Wayne Assembly Power Supply with Adapter|This I-GEM 24-volt power supply is used with Wayne Vista and Ovation fuel dispensers.|https://spatco.com/shop/products/wayne-891132-001-wayne-assembly-power-supply-with-adapter|https://spatco.com//assets/products/images/891132-001.jpg|in stock|294.73 USD|1.85 lb|Wayne||new|no| 88-1810|88-1810|Universal Valve 88-1810 18x10 Multi-Purpose Manhole|Provides access to underground equipment. Recommended for high-traffic applications, where maximum manhole strength is required. Galvanized skirts offer superior rust protection over competitive industry painted skirts.|https://spatco.com/shop/products/universal-valve-88-1810-18x10-multi-purpose-manhole|https://spatco.com//assets/products/images/88-1810.jpg|in stock|307.28 USD|45 lb|Universal Valve||new|no| FSMS180150|FSMS180150|Hose Master FSMS180150 1-1/2-Inch Male x 1-1/2-Inch Male Swivel, 18-Inch Fire Shield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s unique process makes the difference by minimizing residual stress points created in the hose during the manufacturing process. Hose Master’s proprietary tube seam weld technology resists aromatic vapor permeation and Hose Master’s precise ASME certified welders follow specified procedures to insure the strongest fitting attachments.|https://spatco.com/shop/products/hose-master-fsms180150-1-1-2-inch-male-x-1-1-2-inch-male-swivel-18-inch-fire-shield-flex-connector|https://spatco.com//assets/products/images/FSMS180150.jpg|in stock|183.86 USD|6 lb|Hose Master||new|no| 312020-952|312020-952|Veeder Root 312020-952 4-Inch Tank Probe Riser Cap and Ring Kit|This riser cap kit contains an adapter ring which screws onto the 4”NPT riser and a quick-release metal cap which clamps onto the ring. The cap comes drilled and tapped with a cord grip.|https://spatco.com/shop/products/veeder-root-312020-952-4-inch-tank-probe-riser-cap-and-ring-kit|https://spatco.com//assets/products/images/312020-952.jpg|in stock|299.43 USD|5.25 lb|Veeder Root||new|no| FSMM180200|FSMM180200|Hose Master FSMM180200 2-Inch Male x 2-Inch Male, 18-Inch Fire Shield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s unique process makes the difference by minimizing residual stress points created in the hose during the manufacturing process. Hose Master’s proprietary tube seam weld technology resists aromatic vapor permeation and Hose Master’s precise ASME certified welders follow specified procedures to insure the strongest fitting attachments. |https://spatco.com/shop/products/hose-master-fsmm180200-2-inch-male-x-2-inch-male-18-inch-fire-shield-flex-connector|https://spatco.com//assets/products/images/FSMM180200.jpg|in stock|158.69 USD|5 lb|Hose Master||new|no| RK-5000|RK-5000|OPW RK-5000 Fiberglass Resin Kit (Qt. Size)|One kit is required to join the sump base to the sump top. One kit is required to join sump base to 42 FRP tank containment collar.|https://spatco.com/shop/products/opw-pisces-rk-5000-fiberglass-resin-kit-qt-size|https://spatco.com//assets/products/images/RK-5000.jpg|in stock|215.44 USD|4.2 lb|OPW||new|no| 66SB-1010|66SB-1010|OPW 66SB-1010 1-Inch Swivel Breakaway Connector (NPT)|The OPW 66SB Swivel Breakaway is intended for easy installation at the nozzle inlet. The compact, lightweight design incorporates a 360° swivel rotation at both the male end and middle joint, with a simple and easily-reconnectable breakaway on the opposite end. |https://spatco.com/shop/products/opw-66sb-1010-1-inch-swivel-breakaway-connector-npt|https://spatco.com//assets/products/images/66SB-1010.jpg|in stock|227.93 USD|3 lb|OPW||new|no| M01047A007|M01047A007|Gilbarco M01047A007 Right Nozzle Boot Assembly with Lift-to-Start Lever|This replacement lift-to-start nozzle cradle fits Gilbarco Encore fuel dispensers.|https://spatco.com/shop/products/gilbarco-m01047a007-right-nozzle-boot-assembly-with-lift-to-start-lever|https://spatco.com//assets/products/images/M01047A007.jpg|in stock|73.64 USD|3 lb|Gilbarco||new|no| 1-21CC|1-21CC|OPW 1-21CC Replacement Cast Iron Manhole Lid With Seal For 1-2100 Series - 14 Inches|Fits OPW Slip-On Spill Containment Manholes: 1-2100, 1C-2100, 1-2115, 1C-2115. 14-inches wide.|https://spatco.com/shop/products/opw-1-21cc-replacement-cast-iron-manhole-lid-with-seal-for-1-2100-series|https://spatco.com//assets/products/images/1-21CC.jpg|in stock|216.37 USD|45 lb|OPW||new|no| 10BFP-5726|10BFP-5726|OPW 10BFP-5726 1-1/2-Inch Female Threaded Top (Outlet) Connection Emergency Shut-Off Valve|OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at grade level to minimize hazards associated with collision or fire at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, activating poppets and shutting off the flow of fuel. |https://spatco.com/shop/products/opw-10bfp-5726-1-1-2-inch-female-threaded-top-outlet-connection-emergency-shut-off-valve|https://spatco.com//assets/products/images/10BFP-5726.jpg|in stock|214.64 USD|6.5 lb|OPW||new|no| WU001847|WU001847|Wayne WU001847 GRIB RS485 Communication Board|This is a replacement communication board for the Wayne Fusion Forecourt System.|https://spatco.com/shop/products/wayne-wu001847-grib-rs485-communication-board|https://spatco.com//assets/products/images/WU001847.jpg|in stock|218.6 USD|0.55 lb|Wayne||new|no| IA-ESOC|IA-ESOC|Power Integrity IA-ESOC Emergency Stop Operator with Lift-up Clear Cover|Emergency Stop Controls are required by the National Electrical Code at all fueling facilities. Power Integrity offers a full line of emergency stop operators to meet your site requirements. Clear tamper-proof cover protects against accidental activation, damage, and vandalism.|https://spatco.com/shop/products/power-integrity-ia-esoc-emergency-stop-operator-with-lift-up-clear-cover|https://spatco.com//assets/products/images/IA-ESOC.jpg|in stock|200 USD|6 lb|Power Integrity||new|no| 331102-002|331102-002|Veeder Root 331102-002 Two-Wire, Twelve-Foot Sensor Cable|This is a replacement part for the Dispenser Pan Sensor. This is used with TLS-300, TLS-350, TLS-350R, and TLS-450 series consoles.|https://spatco.com/shop/products/veeder-root-331102-002-two-wire-twelve-foot-sensor-cable|https://spatco.com//assets/products/images/331102-002.jpg|in stock|203.94 USD|0.3 lb|Veeder Root||new|no| 7HB-0900|7HB-0900|OPW 7HB-0900 1-Inch, Pressurized, High-Flow, Yellow Automatic Shut-Off Diesel 7HB Nozzle with Sprout Ring|For Heavy-Duty, High-Flow Truck, Bus and Fleet Service. If you operate a full-service truckstop, refuel your own fleet or manage a cardlock refueling location, the low-cost, long-life and durability of the OPW 7H high-flow nozzle can help increase your productivity, sales and profits. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. |https://spatco.com/shop/products/opw-7hb-0900-1-inch-high-flow-yellow-automatic-shut-off-diesel-7hb-nozzle-with-sprout-ring|https://spatco.com//assets/products/images/7HB-0900.jpg|in stock|194.44 USD|3.9 lb|OPW|Yellow|new|no| W2893222-003|W2893222-003|Wayne W2893222-003 Push-To-Start, Three-Switch Panel|This replacement part is for the Wayne Ovation LX dispenser. This panel is UV protected. The kit Includes pre-drilled holes and individually removable position plugs.|https://spatco.com/shop/products/wayne-w2893222-003-push-to-start-three-switch-panel|https://spatco.com//assets/products/images/W2893222-003.jpg|in stock|99.9 USD|1 lb|Wayne||new|no| 623V-2203|623V-2203|OPW 623V-2203 2.5-Inch to 6-Inch WC Pres., -6-Inch to -10-Inch WC Vac. 2-Inch Thread-On Emergency Pressure / Vacuum Vent Valve|Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent. |https://spatco.com/shop/products/opw-623v-2203-2-5-inch-to-6-inch-wc-pres-6-inch-to-10-inch-wc-vac-thread-on-emergency-pressure-vacuum-vent-valve|https://spatco.com//assets/products/images/623V-2203.jpg|in stock|199.11 USD|1 lb|OPW||new|no| APT-MS-XP-150-150|APT-MS-XP-150-150|APT APT-MS-XP-150-150 1-1/2-Inch XP Pipe Clamshell Swivel Fitting|Brass XP pipe clamshell swivel fitting, installs on the end of 1-1/2” single/secondary contained XP pipe with 1-1/2” NPT|https://spatco.com/shop/products/apt-apt-ms-xp-150-150-1-1-2-inch-xp-pipe-clamshell-swivel-fitting|https://spatco.com//assets/products/images/APT-MS-XP-150-150.jpg|in stock|153.7 USD|4 lb|APT||new|no| 012030-236-3|012030-236-3|Ameron 012030-236-3 Red Thread IIA, 3-Inch x 2-Inch Reducer with 3/4-Inch NPT Tap (2 Piece)|Termination fitting with NPT TAP.|https://spatco.com/shop/products/ameron-012030-236-3-red-thread-iia-3-inch-x-2-inch-reducer-with-3-4-inch-npt-tap-2-piece|https://spatco.com//assets/products/images/012030-236-3.jpg|in stock|300.79 USD|1.8 lb|Ameron||new|no| 300-210-01|300-210-01|Franklin Fueling Systems 300-210-01 4-Inch x 4-Inch Anodized Aluminum Vapor Check Valve Adapter|The vapor check valve adapter permits coupling to the vapor return line from the underground tank in dual point systems. The poppet design seals off the vapor path when not coupled.|https://spatco.com/shop/products/franklin-fueling-systems-300-210-01-4-inch-x-4-inch-anodized-aluminum-vapor-check-valve-adapter|https://spatco.com//assets/products/images/300-210-01.jpg|in stock|167.33 USD|2.25 lb|EBW||new|no| 177610-04|177610-04|Husky 177610-04 Black VIIIS Pressure-Activated Heavy-Duty Diesel Nozzle with 3-Notch Hold Open Clip|The Husky 177610-04 VIIIS Pressure-Activated Heavy-Duty Diesel Nozzle with 3-Notch Hold Open Clip features NPTF threads with waffle splash guard and spout bushing. The nozzle shuts off when the pump shuts off, the gas tank is full, the lever is opened before the pump is turned on or the leak detector has not completed the test cycle. The spout is reinforced with thick aluminum bushing that retains spout spring and keeps spout from rounding-in. This model comes equipped with a unique Flow-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. This nozzle comes standard with smooth full grip guard and waffle splash guard. Husky Corporation produces high-quality nozzles, swivels, Safe-T-Breaks and accessories for service station fuel delivery systems. For more than 60-years, Husky has been on the cutting edge of developing and manufacturing products to ensure consumer and environmental safety at the gas pump. Huskys product line features equipment for vapor recovery, conventional fueling, truck and high volume, farm and commercial and convenience store applications. |https://spatco.com/shop/products/husky-177610-04-black-viiis-pressure-activated-heavy-duty-diesel-nozzle-with-3-notch-hold-open-clip|https://spatco.com//assets/products/images/177610-04.JPG|in stock|127.65 USD|8 lb|Husky|Black|new|no| 7H-0100|7H-0100|OPW 7H-0100 1-Inch, High-Flow, Green Automatic Shut-Off Diesel 7H Nozzle with Spout Ring|For Heavy-Duty, High-Flow Truck, Bus and Fleet Service. If you operate a full-service truckstop, refuel your own fleet or manage a cardlock refueling location, the low-cost, long-life and durability of the OPW 7H high-flow nozzle can help increase your productivity, sales and profits. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. |https://spatco.com/shop/products/opw-7h-0100-1-inch-high-flow-green-automatic-shut-off-diesel-7h-nozzle-with-sprout-ring|https://spatco.com//assets/products/images/7H-0100.jpg|in stock|172.96 USD|8 lb|OPW|Green|new|no| N23785-01|N23785-01|Gilbarco N23785-01 Digital Valve Coil|This valve coil is used with the T20013 G1 Digital Control Valve.|https://spatco.com/shop/products/gilbarco-n23785-01-digital-valve-coil|https://spatco.com//assets/products/images/N23785-01.jpg|in stock|419.1 USD|0.1 lb|Gilbarco||new|no| 233-4432|233-4432|OPW 233-4432 4-Inch Top Thread x 3x2-Inch Outlet Thread x 4-Inch Bottom Thread Cross Extractor Fitting|OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4 riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections forattaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor. The OPW 233 Extractor Fittings are designed for use with all OPW 53VML Ball Float Vent Valves that include an extractor cage. This item does not include an extractor cage. |https://spatco.com/shop/products/opw-233-4432-2-inch-top-thread-x-3x2-inch-outlet-thread-x-4-inch-bottom-thread-cross-extractor-fitting|https://spatco.com//assets/products/images/233-4432.jpg|in stock|140 USD|19 lb|OPW||new|no| 66-1300|66-1300|OPW 66-1300 1-Inch Breakaway Valve with 12-Inch Hose|The OPW breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel. This breakaway includes a 12-inch “straightening” hose.|https://spatco.com/shop/products/opw-66-1300-1-inch-breakaway-valve-with-12-inch-hose|https://spatco.com//assets/products/images/66-1300.jpg|in stock|167.44 USD|1.3 lb|OPW||new|no| 4034|4034|Husky 4034 Vacuum Assist Safe-T-Break|Safe-T-Breaks stop the flow of fuel on both sides of the separation and have passed the demanding UL test requirements on separations without leaking or failing.|https://spatco.com/shop/products/husky-4034-vacuum-assist-safe-t-break|https://spatco.com//assets/products/images/4034.jpg|in stock|212.52 USD|3 lb|Husky||new|no| WM040824-0010|WM040824-0010|Wayne WM040824-0010 5 X 11.7 MM Dual Price LCD Display Module|This replacement part is for the Wayne Helix dispenser.|https://spatco.com/shop/products/wayne-wm040824-0010-5-x-11-7-mm-dual-price-lcd-display-module|https://spatco.com//assets/products/images/WM040824-0010.jpg|in stock|61.98 USD|1 lb|Wayne||new|no| FSMM120150|FSMM120150|Hose Master FSMM120150 1-1/2-Inch Male x 1-1/2-Inch Male, 12-Inch Fire Shield Flex Connector|Hose Master’s FireShield connectors are the safest, longest lasting, and most flexible metal hose connectors manufactured today. Hose Master’s unique process makes the difference by minimizing residual stress points created in the hose during the manufacturing process. Hose Master’s proprietary tube seam weld technology resists aromatic vapor permeation and Hose Master’s precise ASME certified welders follow specified procedures to insure the strongest fitting attachments. |https://spatco.com/shop/products/hose-master-fsmm120150-1-1-2-inch-male-x-1-1-2-inch-male-12-inch-fire-shield-flex-connector|https://spatco.com//assets/products/images/FSMM120150.jpg|in stock|109.16 USD|3 lb|Hose Master||new|no| 171-071-1|171-071-1|Red Jacket 171-071-1 DPDT Power Relay 120V AC Coil IQ/ISOTROL|Used in Red Jacket’s family of submersible turbine pump controllers.|https://spatco.com/shop/products/red-jacket-171-071-1-dpdt-power-relay-120v-ac-coil-iq-isotrol|https://spatco.com//assets/products/images/171-071-1.jpg|in stock|186.23 USD|3 lb|Red Jacket||new|no| CTM-100|CTM-100|Catlow CTM-100 1-Inch Female x 1-Inch Female Cam Twist Reconnectable Magnetic Breakaway|The Cam Twist is designed to be installed between the fuel dispenser and the nozzle. to inspect the unit, two wrenches applied to opposite ends of the breakaway with a twisting motion mechanically separates the unit. The unique design seals the internal components before separation is complete, thus reducing any exposure to product and any environmental impact. With the cam twist Magnetic ‘snap-back technology’ alignment and reconnection is easy. Align the two halves together and let the magnets do the work while pushing the unit back together.|https://spatco.com/shop/products/catlow-ctm-100-1-inch-female-x-1-inch-female-cam-twist-reconnectable-magnetic-breakaway|https://spatco.com//assets/products/images/CTM-100.jpg|in stock|128.78 USD|3 lb|Catlow||new|no| 012030-311-3|012030-311-3|Ameron 012030-311-3 Red Thread IIA, 3-Inch Secondary Crossover 45-Degree Elbow Fitting (2 Piece)|This elbow is used for secondary containment. UL971 listed.|https://spatco.com/shop/products/ameron-012030-311-3-red-thread-iia-3-inch-secondary-crossover-45-degree-elbow-fitting-2-piece|https://spatco.com//assets/products/images/012030-311-3.jpg|in stock|261.4 USD|6 lb|Ameron||new|no| 523V-1150|523V-1150|OPW 523V-1150 2-Inch, 8-Ounce Pressure, 1/2-Ounce Vacuum, Slip-On Pressure Vacuum Vent|Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent. |https://spatco.com/shop/products/opw-523v-1150-2-inch-8-ounce-pressure-1-2-ounce-vacuum-slip-on-pressure-vacuum-vent|https://spatco.com//assets/products/images/523V-1150.jpg|in stock|156.37 USD|3 lb|OPW||new|no| WU003091-0003|WU003091-0003|Wayne WU003091-0003 Composite Nozzle Boot without Collar|This replacement fuel nozzle holder is for the Wayne Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-wu003091-0003-composite-nozzle-boot-without-collar|https://spatco.com//assets/products/images/WU003091-0003.JPG|in stock|155.58 USD|8 lb|Wayne||new|no| 13836-100|13836-100|Verifone 13836-100 100-Foot, Shielded RS-232 Cable|The shielded Verifone RS232 GEM II RJ45-RJ45 Cable is a VeriFone MX860 Payment Terminal Accessory.|https://spatco.com/shop/products/verifone-13836-100-100-foot-shielded-rs-232-cable|https://spatco.com//assets/products/images/13836-100.jpg|in stock|89.14 USD|2.3 lb|Verifone||new|no| 1835|1835|Irpco 1835 3/4-Inch x 8-1/2-Foot, Flexsteel Stage II Vapor Assist Hose|Flexsteel Flexsteel II Vapor Assist Hoses are designed for Stage II Vac. Assist Systems where a pump in the dispenser pulls the gasoline vapors away from the vehicle fill pipe during fueling. In an Assist system, the gasoline flows through the outer hose and the vapors are evacuated through the inner hose.|https://spatco.com/shop/products/irpco-1835-3-4-inch-x-8-1-2-foot-flexsteel-stage-ii-vapor-assist-hose|https://spatco.com//assets/products/images/1835.JPG|in stock|267.44 USD|5.9 lb|Irpco||new|no| 015-916264-KIT|015-916264-KIT|Wayne 015-916264-KIT Diaphragm Valve Repair Kit|This kit is used to replace parts in the VISTA diaphragm valve.|https://spatco.com/shop/products/wayne-015-916264-kit-diaphragm-valve-repair-kit|https://spatco.com//assets/products/images/015-916264-KIT.jpg|in stock|146.08 USD|0.5 lb|Wayne||new|no| 123381C|123381C|Irpco 123381C Hardwall Steelflex 1-Inch x 14-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end.|https://spatco.com/shop/products/irpco-123381c-hardwall-steelflex-1-inch-x-14-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/123381C.jpg|in stock|132.27 USD|8.75 lb|Irpco|Black|new|no| 421031-021|421031-021|Tokheim 421031-021 Premier B Pulsar (Optic Encoder) Assembly|Optic Encoder/Pulsar for Premier B series dispensers. May also be used in GASBOY 9800 series dispensers.|https://spatco.com/shop/products/tokheim-421031-021-premier-b-pulsar-optic-encoder-assembly|https://spatco.com//assets/products/images/421031-21.jpg|in stock|156 USD|0.1 lb|Wayne||new|no| 012020-622-0|012020-622-0|Ameron 012020-622-0 2-Inch, Single-Wall, Sump Entry Termination Bonded Fitting|2-Inch, single-wall, sump entry termination bonded fitting.|https://spatco.com/shop/products/ameron-012020-622-0-2-inch-single-wall-sump-entry-termination-bonded-fitting|https://spatco.com//assets/products/images/012020-622-0.jpg|in stock|236.6 USD|0.65 lb|Ameron||new|no| 330020-282|330020-282|Veeder Root 330020-282 Cap and Cord Grip Kit|The cap on the riser containing the Mag Plus probe must be modified to allow the probe’s cable to exit the riser. This modification requires making a 1/2”-14 NPT tapped hole in the cap for a cord grip. Two types of drilled and tapped Riser Cap kits are available for purchase, or you may be able to modify the existing riser cap. This Riser Cap kit contains a non-metallic cap which screws onto the 4” NPT riser. The cap comes drilled and tapped with a cord grip. The other pre-drilled kit is the Metal Cap and Ring Kit (312020-952).|https://spatco.com/shop/products/veeder-root-330020-282-cap-and-cord-grip-kit|https://spatco.com//assets/products/images/330020-282.jpg|in stock|192 USD|1.25 lb|Veeder Root||new|no| 10BM-5825|10BM-5825|OPW 10BM-5825 1-1/2-Inch Male Threaded Top (Outlet) Connection Emergency Shut-Off Valve|OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at grade level to minimize hazards associated with collision or fire at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, activating poppets and shutting off the flow of fuel. |https://spatco.com/shop/products/opw-10bm-5825-1-1-2-inch-male-threaded-top-outlet-connection-emergency-shut-off-valve|https://spatco.com//assets/products/images/10BM-5825.jpg|in stock|146.19 USD|5.95 lb|OPW||new|no| REF-4015|REF-4015|OPW REF-4015 4-Inch x 1 1/2-Inch Flexworks Rigid Entry Fitting|This Rigid Entry Fitting has minimal exposed rubber, yet still accommodates ground movement. The sealing redundancy throughout the fitting provides maximum containment and unmatched protection from water intrusion. |https://spatco.com/shop/products/opw-ref-4015-4-inch-x-1-1-2-inch-flexworks-rigid-entry-fitting|https://spatco.com//assets/products/images/REF-4015.jpg|in stock|137.11 USD|2.75 lb|OPW||new|no| 10RMTP-5851|10RMTP-5851|OPW 10RMTP-5851 1-1/2-Inch NPT Male Threaded Double Poppet Replacement Valve Top|This is a replacement valve top for the OPW 10BHMP-5830 1-1/2-Inch Male Threaded Top (Outlet) Connection Emergency Shut-Off Valve. |https://spatco.com/shop/products/opw-10rmtp-5851-1-1-2-inch-npt-male-threaded-double-poppet-replacement-valve-top|https://spatco.com//assets/products/images/10RMTP-5851.jpg|in stock|141.67 USD|1.95 lb|OPW||new|no| 523V-1100|523V-1100|OPW 523V-1100 2-Inch, 8-Ounce Pressure, 1/2-Ounce Vacuum, Thread-On Pressure Vacuum Vent|Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent. |https://spatco.com/shop/products/opw-523v-1100-2-inch-8-ounce-pressure-1-2-ounce-vacuum-thread-on-pressure-vacuum-vent|https://spatco.com//assets/products/images/523V-1100.jpg|in stock|144.83 USD|2 lb|OPW||new|no| 33469201|33469201|Ameron 33469201 Three-Inch LCX Containment 90-Degree Elbow (2 Piece)|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below.|https://spatco.com/shop/products/ameron-33469201-three-inch-lcx-containment-90-degree-elbow-2-piece|https://spatco.com//assets/products/images/33469201.jpg|in stock|216.4 USD|6 lb|Ameron||new|no| DEB-0200X|DEB-0200X|OPW DEB-0200X 2-Inch LCX Double Entry Boot Fitting for 2-Inch Ameron LCX/MCX Pipe|FlexWorks Double Flexible Entry Boots are designed to seal the sump penetration. These entry boots incorporate both internal and external band clamps to provide additional sealing in harsh environments. Boots firmly fasten and seal to the sump wall using steel studs, fasteners and a galvanized compression ring. These entry boots are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and conduit.|https://spatco.com/shop/products/opw-deb-0200x-2-inch-lcx-double-entry-boot-fitting-for-2-inch-ameron-lcx-mcx-pipe|https://spatco.com//assets/products/images/DEB-0200X.jpg|in stock|123.88 USD|3.9 lb|OPW||new|no| 014-723-1|014-723-1|Red Jacket 014-723-1 Magnetic Line Contractor Relay|Replacement part for Red Jacket Control Box w/115V Coil (60 Hz), Part # 880-041-5.|https://spatco.com/shop/products/red-jacket-014-723-1-magnetic-line-contractor-relay|https://spatco.com//assets/products/images/014-723-1.jpg|in stock|149.5 USD|5 lb|Red Jacket||new|no| 330020-012|330020-012|Veeder Root 330020-012 Universal Sensor Mounting Kit|The Universal Mounting Kit is compatible with most manufacturer’s dispenser pans and containment sumps and allows you to mount:• a Dispenser Pan Sensor in a dispenser pan• a Containment Sump Sensor to a containment sump• a Stand-alone Dispenser Pan Sensor with Dispenser Control Interface in a dispenser pan or sump|https://spatco.com/shop/products/veeder-root-330020-012-universal-sensor-mounting-kit|https://spatco.com//assets/products/images/330020-012.jpg|in stock|145 USD|1.45 lb|Veeder Root||new|no| 244OM-0100AV|244OM-0100AV|Morrison Bros. 244OM-0100AV 4-Inch, 8-Ounce per Square Inch, Emergency Vent - Male NPT with Viton A O Ring|Emergency vents are installed on above-ground storage tanks as a code requirement. Emergency vents provide high-capacity pressure relief if the tank is exposed to fire. When the internal tank pressure reaches the opening pressure of the vent, the weighted cover moves up on the center pin allowing air to escape. When the internal tank pressure falls, the cover automatically lowers back onto the body and is automatically reset.|https://spatco.com/shop/products/morrison-bros-244om-0100av-4-inch-8-ounce-per-square-inch-emergency-vent-male-npt-with-viton-a-o-ring|https://spatco.com//assets/products/images/244OM-0100AV.jpg|in stock|132.34 USD|12.6 lb|Morrison Bros.||new|no| SBK-1500V|SBK-1500V|OPW SBK-1500V Stabilizer Bar Kit for the Ovation Vapor Line|The FlexWorks pipe stabilizer bar kit provides reliable support inside dispenser sumps/pans for boss-mounted emergency shear valves. One kit is required for each emergency valve and vapor shear valve. This kit is to be used with the Dresser/Wayne Ovation Vapor Line (DSW-1543, DSF-1543, 1543C).|https://spatco.com/shop/products/opw-pisces-sbk-1500v-stabilizer-bar-kit-for-the-ovation-vapor-line|https://spatco.com//assets/products/images/SBK-1500V.jpg|in stock|64.18 USD|6.2 lb|OPW||new|no| 305XPA1100|305XPA1100|Morrison Bros. 305XPA1100 4-Inch Tank Monitoring Cap/Adaptor Combination With 1/2 Inch Hole|The Morrison Bros. Cap and Adaptor are used for access to leak detection on fuel storage tanks. The cap has a center pull ring with toggle cam to fit adaptor groove. Tight seal and lockable. The Adaptor is profile machined for cam and groove fit on industry standard tight seal caps. |https://spatco.com/shop/products/morrison-bros-305xpa1100-4-inch-evr-approved-tank-monitoring-cap-adaptor-combination-with-1-2-inch-hole|https://spatco.com//assets/products/images/305XPA1100.jpg|in stock|113.37 USD|6 lb|Morrison Bros.||new|no| 634LPC-0400|634LPC-0400|OPW 634LPC-0400 Low-Profile Top-Seal Fill Cap|The OPW 634LPC Low Profile Top-Seal Fill Cap is designed for tight installations where the clearance between the top of the fill adaptor and the underside of the spill container cover is limited. The rugged iron lever provides a positive cam-action that seats the cap firmly in the adaptor groove for a water and vapor-tight seal. When engaged, the lockable cap adds only 1/2 to the final height of the adaptor. The 634LPC can be used with the 4 OPW 633T, 633TE, 633TC, and 61SA series top-seal fill adaptors.|https://spatco.com/shop/products/opw-634lpc-0400-low-profile-top-seal-fill-cap|https://spatco.com//assets/products/images/634LPC-0400.jpg|in stock|126.08 USD|8 lb|OPW||new|no| 013-916264-KIT|013-916264-KIT|Wayne 013-916264-KIT Diaphragm Valve Repair Kit|Use this kit to repair the Wayne Vista series fuel dispenser diaphragm valve.|https://spatco.com/shop/products/wayne-013-916264-kit-diaphragm-valve-repair-kit|https://spatco.com//assets/products/images/013-916264-KIT.jpg|in stock|105.07 USD|0.05 lb|Wayne||new|no| 000-918856-KIT|000-918856-KIT|Wayne 000-918856 KIT Belt Plus-V, Power Twist|Suction pump V-link belt. Used in Select Century Electronic Registration 3/G7200 and 3/G2200 Dispensers.|https://spatco.com/shop/products/wayne-000-918856-kit-belt-plus-v-power-twist|https://spatco.com//assets/products/images/000-918856-KIT.jpg|in stock|132.4 USD|2 lb|Wayne||new|no| 012030-410-3|012030-410-3|Ameron 012030-410-3 3-Inch, Secondary Containment Tee Fitting (2 Piece)|This tee is used for containment of primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-012030-410-3-3-inch-secondary-containment-tee-fitting-2-piece|https://spatco.com//assets/products/images/012030-410-3.jpg|in stock|188.21 USD|4.8 lb|Ameron||new|no| APT-FEB-200-D|APT-FEB-200-D|APT APT-FEB-200-D 2-Inch Flexible Entry Boot|Flexible entry boot for XP-200-D. The flexible two-piece boot doubles the sealing power of the entry boot. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot.|https://spatco.com/shop/products/apt-apt-feb-200-d-2-inch-flexible-entry-boot|https://spatco.com//assets/products/images/FEB-200-D.jpg|in stock|80.15 USD|2.5 lb|APT||new|no| 22469203|22469203|Ameron 22469203 2-Inch LCX Containment Tee|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below.|https://spatco.com/shop/products/ameron-22469203-2-inch-lcx-containment-tee|https://spatco.com//assets/products/images/22469203.jpg|in stock|188.21 USD|4.35 lb|Ameron||new|no| APT-SBK-3|APT-SBK-3|APT APT-SBK-3 Stabilizer Bar Kit for Encore Dispenser Sump|The Stabilizer Bar Kit mounts into welded strut channels for shear valve mounting. One SBK is required for each shear valve. The SBKs are track mount design and adjust in all planes for proper alignment of the shear valve to the dispenser piping.|https://spatco.com/shop/products/apt-apt-sbk-3-stabilizer-bar-kit-for-encore-dispenser-sump|https://spatco.com//assets/products/images/APT-SBK-3.jpg|in stock|82.15 USD|7.9 lb|APT||new|no| 1711LPC-0300|1711LPC-0300|OPW 1711LPC-0300 3-Inch, Low Profile, Vapor Recovery Cap (E85 Approved)|The OPW 1711LPC low profile top seal vapor cap is designed for tight installations where the clearance between the top of the vapor adaptor and the underside of the spill container or manhole cover is limited. The rugged iron lever provides a positive cam-action that seats the cap firmly in the adaptor groove for a water and vapor tight seal. When engaged, the lockable cap adds only 1/2 to the final height of the adaptor. The cap is powder coated API Orange to signify vapor recovery. The 1711LPC can be used with the OPW 3 1611AV, 1611AVB and 61VSA series vapor adaptors.|https://spatco.com/shop/products/opw-1711lpc-0300-3-inch-low-profile-vapor-recovery-cap-e85-approved|https://spatco.com//assets/products/images/1711LPC-0300.jpg|in stock|118.77 USD|7 lb|OPW||new|no| 68EZR-7575|68EZR-7575|OPW 68EZR-7575 3/4-Inch Dry Reconnectable Breakaway|The OPW 68EZR-7575 Reconnectable Breakaway has been designed for retail fueling operations to deliver an increased level of security in the event of a drive off. Not only is it the fastest and easiest breakaway in the industry to reconnect, but also the one that delivers the greatest peace of mind that it is securely reconnected. Built on the 66REC breakaway technology platform, the 68EZR delivers trusted OPW quality and proven technology at the lowest cost of ownership. The 68EZR is installed on fuel dispensing hoses and will separate when subjected to a designated pull force. Upon separation, the dual valves seat automatically, stopping the fl ow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. For proper operation on high-hanging hoses, the OPW 68EZR must always be installed with a “straightening” hose, such as the OPW 66H. For low hose applications, the OPW 68EZR should be installed downstream of the retractor cable.|https://spatco.com/shop/products/opw-68ezr-7575-3-4-inch-dry-reconnectable-breakaway|https://spatco.com//assets/products/images/68EZR-7575.jpg|in stock|96.66 USD|3 lb|OPW||new|no| 123201C|123201C|Irpco 123201C Hardwall Steelflex 1-Inch x 8-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end.|https://spatco.com/shop/products/irpco-123201c-hardwall-steelflex-1-inch-x-8-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/123201C.jpg|in stock|89.05 USD|11 lb|Irpco|Black|new|no| WU004539-0001|WU004539-0001|Wayne WU004539-0001 1 MB SD Card|The memory card is used with the iX Fleet Fuel Management System dispenser.|https://spatco.com/shop/products/wayne-wu004539-0001-1-mb-sd-card|https://spatco.com//assets/products/images/WU004539-0001.jpg|in stock|96.62 USD|0.4 lb|Wayne||new|no| 22469206|22469206|Ameron 22469206 2-Inch LCX Containment Termination Sleeve with Test Port (2 Piece Clamshell)|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below. |https://spatco.com/shop/products/ameron-22469206-2-inch-lcx-containment-termination-sleeve-with-test-port-2-piece-clamshell|https://spatco.com//assets/products/images/22469206.jpg|in stock|169.4 USD|0.95 lb|Ameron||new|no| 124421C|124421C|Irpco 124421C Hardwall Steelflex 3/4-Inch x 12-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end.|https://spatco.com/shop/products/irpco-124421c-hardwall-steelflex-3-4-inch-x-12-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/124421C.jpg|in stock|97.47 USD|10 lb|Irpco|Black|new|no| FSA-400-S|FSA-400-S|OPW FSA-400-S 4-Inch Short Face Seal Adaptor for Cast Iron Base Only|This Threaded Riser Face Seal Adaptor provides a flat, true sealing surface on threaded pipes where a gasket seal exists per EVR requirements. It is installed on the fill pipe riser below the spill container to provide a true sealing surface for the drop tube flange on the overfill prevention valves. This adaptor is also required on tank gauging risers and optional on vapor risers and rotatable adaptors. Use this adaptor with cast iron bases only.|https://spatco.com/shop/products/opw-fsa-400-s-4-inch-short-face-seal-adaptor-for-cast-iron-base-only|https://spatco.com//assets/products/images/FSA-400-S.jpg|in stock|92.05 USD|3.4 lb|OPW||new|no| FSA-400|FSA-400|OPW FSA-400 4-Inch Face Seal Adaptor|This Threaded Riser Face Seal Adaptor provides a flat, true sealing surface on threaded pipes where a gasket seal exists per EVR requirements. It is installed on the fill pipe riser below the spill container to provide a true sealing surface for the drop tube flange on the overfill prevention valves. This adaptor is also required on tank gauging risers and optional on vapor risers and rotatable adaptors.|https://spatco.com/shop/products/opw-fsa-400-4-inch-face-seal-adaptor|https://spatco.com//assets/products/images/FSA-400.jpg|in stock|92.05 USD|8 lb|OPW||new|no| APT-SBK-2|APT-SBK-2|APT APT-SBK-2 8-1/4-Inch - 10-7/8-Inch Stabilizer Bar Kit|The Stabilizer Bar Kit mounts into welded strut channels for shear valve mounting. One SBK is required for each shear valve. The SBKs are track mount design and adjust in all planes for proper alignment of the shear valve to the dispenser piping.|https://spatco.com/shop/products/apt-apt-sbk-2-8-1-4-inch-10-7-8-inch-stabilizer-bar-kit|https://spatco.com//assets/products/images/APT-SBK-2.jpg|in stock|68.39 USD|6.05 lb|APT||new|no| 125141CG|125141CG|Irpco 125141CG Green Hardwall Steelflex 5/8-Inch x 9-Foot, Ultra with Chrome Crimped Male Ends|A green heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end.|https://spatco.com/shop/products/irpco-125141cg-green-hardwall-steelflex-5-8-inch-x-9-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/125141CG.jpg|in stock|83.51 USD|2.5 lb|Irpco|Green|new|no| 22469204|22469204|Ameron 22469204 2-Inch LCX Containment Coupling (2 Piece Clamshell)|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below. |https://spatco.com/shop/products/ameron-22469204-2-inch-lcx-containment-coupling-2-piece-clamshell|https://spatco.com//assets/products/images/22469204.jpg|in stock|160 USD|4.2 lb|Ameron||new|no| WU005427-0001|WU005427-0001|Wayne WU005427-0001 Quad Channel LED Driver Board|This replacement board is part of the Wayne Helix payment terminal CBC.|https://spatco.com/shop/products/wayne-wu005427-0001-quad-channel-led-driver-board|https://spatco.com//assets/products/images/WU005427-0001.jpg|in stock|118.88 USD|1.5 lb|Wayne||new|no| REF-0100C|REF-0100C|OPW REF-0100C Flexworks 1-Inch, Nylon Rigid Conduit Entry Fitting|This Rigid Entry Fitting has minimal exposed rubber, yet still accommodates ground movement. The sealing redundancy throughout the fitting provides maximum containment and unmatched protection from water intrusion.|https://spatco.com/shop/products/opw-ref-0100c-flexworks-1-inch-nylon-rigid-conduit-entry-fitting|https://spatco.com//assets/products/images/REF-0100C.jpg|in stock|83.5 USD|2 lb|OPW||new|no| REF-0075C|REF-0075C|OPW REF-0075C Flexworks 3/4-Inch, Nylon Rigid Conduit Entry Fitting|This Rigid Entry Fitting has minimal exposed rubber, yet still accommodates ground movement. The sealing redundancy throughout the fitting provides maximum containment and unmatched protection from water intrusion. |https://spatco.com/shop/products/opw-ref-0075c-flexworks-3-4-inch-nylon-rigid-conduit-entry-fitting|https://spatco.com//assets/products/images/REF-0075C.jpg|in stock|83.5 USD|0.9 lb|OPW||new|no| M10206B002|M10206B002|Gilbarco M10206B002 10.4-Inch, Left Softkeys Keypad|This left softkeys keypad is used in the Gilbarco Encore 700S.|https://spatco.com/shop/products/gilbarco-m10206b002-10-4-inch-left-softkeys-keypad|https://spatco.com//assets/products/images/M10206B002.jpg|in stock|67 USD|1 lb|Gilbarco||new|no| M10206B001|M10206B001|Gilbarco M10206B001 10.4-Inch, Right Softkeys Keypad|This right softkeys keypad is used in the Gilbarco Encore 700S.|https://spatco.com/shop/products/gilbarco-m10206b001-10-4-inch-right-softkeys-keypad|https://spatco.com//assets/products/images/M10206B001.jpg|in stock|67 USD|0.5 lb|Gilbarco||new|no| 1805V|1805V|Irpco 1805V 3/4-Inch x 1-Foot, Flexsteel Stage II Vapor Assist Hose|Flexsteel Flexsteel II Vapor Assist Hoses are designed for Stage II Vac. Assist Systems where a pump in the dispenser pulls the gasoline vapors away from the vehicle fill pipe during fueling. In an Assist system, the gasoline flows through the outer hose and the vapors are evacuated through the inner hose. Closeout Pricing...While Supplies Last!|https://spatco.com/shop/products/irpco-1805v-3-4-inch-x-1-foot-flexsteel-stage-ii-vapor-assist-hose|https://spatco.com//assets/products/images/1805V.jpg|in stock|50.01 USD|1.5 lb|Irpco||new|no| 000-039657-|000-039657-|Wayne 000-039657- Wire Reel|This wire reel is part of the hose retractor module for the Global Century G2000 and G2200 series dispensers.|https://spatco.com/shop/products/wayne-000-039657-wire-reel|https://spatco.com//assets/products/images/000-039657.jpg|in stock|104.85 USD|3 lb|Wayne||new|no| SBK-1500|SBK-1500|OPW SBK-1500 Stabilizer Bar Kit for the Ovation Product Line|The FlexWorks pipe stabilizer bar kit provides reliable support inside dispenser sumps/pans for boss-mounted emergency shear valves. One kit is required for each emergency valve and vapor shear valve. This kit is to be used with the Dresser/Wayne Ovation Product Line (DSW-1543, DSF-1543, 1543C).|https://spatco.com/shop/products/opw-pisces-sbk-1500-stabilizer-bar-kit-for-the-ovation-product-line|https://spatco.com//assets/products/images/SBK-1500.jpg|in stock|97.34 USD|6.1 lb|OPW||new|no| 012030-360-3|012030-360-3|Ameron 012030-360-3 Red Thread IIA, 3-Inch, 90-Degree Elbow (2 Piece)|Nominal pipe size: 7-inches, +/- 1/8 inch. UL971 listed.|https://spatco.com/shop/products/ameron-012030-360-3-red-thread-iia-3-inch-90-degree-elbow-2-piece|https://spatco.com//assets/products/images/012030-360-3.jpg|in stock|150.71 USD|3.85 lb|Ameron||new|no| 012030-310-3|012030-310-3|Ameron 012030-310-3 Red Thread IIA, 3-Inch, 45-Degree Secondary Containment Elbow (2 Piece)|This elbow is used for the containment of primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-012030-310-3-red-thread-iia-3-inch-45-degree-secondary-containment-elbow-2-piece|https://spatco.com//assets/products/images/012030-310-3.jpg|in stock|150.71 USD|5 lb|Ameron||new|no| 012030-101-3|012030-101-3|Ameron 012030-101-3 3-Inch, Red Thread IIA Coupling Secondary Fitting (2 Piece)|This secondary containment fitting measures 14-inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012030-101-3-3-inch-red-thread-iia-coupling-secondary-fitting-2-piece|https://spatco.com//assets/products/images/012030-101-3.jpg|in stock|150.71 USD|4.3 lb|Ameron||new|no| 11AP-0400|11AP-0400|OPW 11AP-0400 Black Unleaded Nozzle Without Hold Open Clip 3/4 Inch Inlet|The OPW 11 Series automatic nozzles are OPW’s premium conventional nozzles for safe retail and commercial petroleum filling. The OPW 11 Series is the most trusted conventional nozzle in the world for full service use. Compatible up to E10 (10% Ethanol). Unleaded nozzles are designed for appropriate flow rates and have smaller diameter spouts than diesel or leaded gasoline spouts. |https://spatco.com/shop/products/opw-11ap-0400-black-unleaded-nozzle-without-hold-open-clip-3-4-inch-inlet|https://spatco.com//assets/products/images/11AP-0400.jpg|in stock|92.87 USD|8 lb|OPW|Black|new|no| 11AP-0100|11AP-0100|OPW 11AP-0100 Green Unleaded Nozzle Without Hold Open Clip 3/4 Inch Inlet|The OPW 11 Series automatic nozzles are OPW’s premium conventional nozzles for safe retail and commercial petroleum filling. The OPW 11 Series is the most trusted conventional nozzle in the world for full service use. Compatible up to E10 (10% Ethanol). Unleaded nozzles are designed for appropriate flow rates and have smaller diameter spouts than diesel or leaded gasoline spouts.|https://spatco.com/shop/products/opw-11ap-0100-green-unleaded-nozzle-without-hold-open-clip-3-4-inch-inlet|https://spatco.com//assets/products/images/11AP-0100.jpg|in stock|92.87 USD|3.5 lb|OPW|Green|new|no| 159561-04|159561-04|Husky 159561-04 XS Light Duty Pressure Activated Diesel Nozzle with 3-Notch Hold Open Clip, Full Grip Guard, 1808 Waffle Splash Guard and Flo-Equalize|Conventional Fueling XS Pressure Activated Automatic Nozzle, Black - 3/4 (19 mm) Inlet, NPTF, Light Duty Diesel with Three Notch Hold Open Clip, Full Grip Guard, and 1808 Waffle Splash Guard. This Huskey Nozzle shuts off when gas tank is full, lever is opened before the pump is turned on or the leak detector has not completed the test cycle. Stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage. This model comes equipped with a unique Flow-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Stream Shaper reduces turbulence for straighter fuel flow and less splash back spillage. Comes standard with XS nozzle, pressure activated, light duty diesel nozzle with three notch hold open clip, full grip guard, #1808 waffle splash guard and flow-equalizer. |https://spatco.com/shop/products/husky-159561-04-xs-light-duty-pressure-activated-diesel-nozzle-with-3-notch-hold-open-clip-full-grip-guard-1808-waffle-splash-guard-and-flo-equalizer|https://spatco.com//assets/products/images/159561-04.JPG|in stock|72.02 USD|5 lb|Husky|Black|new|no| REF-0150|REF-0150|OPW REF-0150 1-1/2-Inch Double Entry Boot Fitting for 1-1/2-Inch DW FlexWorks Pipe|FlexWorks Double Flexible Entry Boots are designed to seal the sump penetration. These entry boots incorporate both internal and external band clamps to provide additional sealing in harsh environments. Boots firmly fasten and seal to the sump wall using steel studs, fasteners and a galvanized compression ring. These entry boots are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and conduit.|https://spatco.com/shop/products/opw-deb-0150-1-1-2-inch-double-entry-boot-fitting-for-1-1-2-inch-dw-flexworks-pipe|https://spatco.com//assets/products/images/DEB-0150.jpg|in stock|88.32 USD|4 lb|OPW||new|no| 888459-103-284|888459-103-284|Wayne 888459-103-284 Gas N Go Push to Start Decal|This is a replacement Push-to-Start Overlay for the Food City Gas N Go fuel dispensers.|https://spatco.com/shop/products/wayne-888459-103-284-gas-n-go-push-to-start-decal|https://spatco.com//assets/products/images/888459-103-284.jpg|in stock|113.2 USD|0.4 lb|Wayne||new|no| DEB-0751|DEB-0751|OPW DEB-0751 1/2-Inch, 3/4-Inch and 1-Inch Conduit Double Entry Boot Fitting|FlexWorks Double Flexible Entry Boots are designed to seal the sump penetration. These entry boots incorporate both internal and external band clamps to provide additional sealing in harsh environments. Boots firmly fasten and seal to the sump wall using steel studs, fasteners and a galvanized compression ring. These entry boots are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and conduit.|https://spatco.com/shop/products/opw-deb-0751-1-2-inch-3-4-inch-and-1-inch-conduit-double-entry-boot-fitting|https://spatco.com//assets/products/images/DEB-0751.jpg|in stock|85.43 USD|4 lb|OPW||new|no| 125172C|125172C|Irpco 125172C Hardwall Steelflex 5/8-Inch x 9-1/2-Foot Ultra with Chrome Crimped Male x Swivel Ends|A green heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males x Swivel ends. TUBE: Gasoline-resistant nitrileREINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-125172c-hardwall-steelflex-5-8-inch-x-9-1-2-foot-ultra-with-chrome-crimped-male-x-swivel-ends|https://spatco.com//assets/products/images/125172C.jpg|in stock|82.18 USD|4.15 lb|Irpco|Green|new|no| 123022|123022|Irpco 123022 1-Inch x 8-Inch Whip Hose with Swivel|This is a 1 x 8 Hardwall Steelflex non-vapor emitting whip hose with chrome plated couplings. Swivel couplings have moveable parts which are susceptible to wear. Swivel couplings should be carefully inspected for any signs of dampness or wear to any of their component parts. All couplings should be free of dirt and grime. Each end of the hose assembly should be checked to make sure the coupling has not slipped, and that its attachment to the hose is not compromised.|https://spatco.com/shop/products/irpco-123022-1-inch-x-8-inch-whip-hose-with-swivel|https://spatco.com//assets/products/images/123022.jpg|in stock|86.05 USD|1.55 lb|Irpco||new|no| 6350|6350|Husky 6350 3/4-Inch Male x 3/4-Inch Female E85 Multiplane Swivel|• Multi-plane, full 360 degree spherical rotation for easy movement of nozzle.• Compatible with unleaded, diesel, and all Ethanol blends through E100.• Compatible with fuels containing alcohol.• High flow rate due to laminar flow design.• Compact and light weight for easy handling.• Double o-ring seals at each swivel provide long life and low temperature (-40* F/C) performance.• High strength step shoulder bearing diameters and impact absorbing stops. |https://spatco.com/shop/products/husky-6350-3-4-inch-male-x-3-4-inch-female-e85-multiplane-swivel|https://spatco.com//assets/products/images/6350.jpg|in stock|69.72 USD|2 lb|Husky||new|no| 888872-001|888872-001|Wayne 888872-001 Ovation Service Button Kit|Kit for Ovation Push to Start Panel (888006-01). Includes Octane 85 through 94, plus Diesel, and Diesel #2 decals.|https://spatco.com/shop/products/wayne-888872-001-ovation-service-button-kit|https://spatco.com//assets/products/images/888872-001.jpg|in stock|64.7 USD|1 lb|Wayne||new|no| 886380-001|886380-001|Wayne 886380-001 Non-Vac ISB Cable|This cable is used with the Wayne 2V and Vista fuel dispensers.|https://spatco.com/shop/products/wayne-886380-001-non-vac-isb-cable|https://spatco.com//assets/products/images/886380-001.jpg|in stock|83.43 USD|0.65 lb|Wayne||new|no| 887223-001|887223-001|Wayne 887223-001 I-GEM 24V Power Distribution Board|Used in the Wayne Vista and Ovation Fueling Systems.|https://spatco.com/shop/products/wayne-887223-001-i-gem-24v-power-distribution-board|https://spatco.com//assets/products/images/887223-001.jpg|in stock|90.28 USD|0.5 lb|Wayne||new|no| M06745A001|M06745A001|Gilbarco M06745A001 24v USB Printer Cable for Encore 500|This is a replacement printer cable for the Encore 500.|https://spatco.com/shop/products/gilbarco-m06745a001-24v-usb-printer-cable-for-encore-500|https://spatco.com//assets/products/images/M06745A001.jpg|in stock|102.83 USD|0.35 lb|Gilbarco||new|no| SBK-1100J|SBK-1100J|OPW SBK-1100J Stabilizer Bar Kit|The FlexWorks pipe stabilizer bar kit provides reliable support inside dispenser sumps/pans for boss-mounted emergency shear valves. One kit is required for each emergency valve and vapor shear valve. This kit is to be used with 1117F, 1123, 1123F, 1120 sump/pan.|https://spatco.com/shop/products/opw-pisces-sbk-1100j-stabilizer-bar-kit|https://spatco.com//assets/products/images/SBK-1100J.jpg|in stock|87.99 USD|5.9 lb|OPW||new|no| M05912A002|M05912A002|Gilbarco M05912A002 Nozzle Boot Assembly with Lift-to-Start Handle on Right Side|This replacement lift-to-start nozzle cradle fits Gilbarco Encore fuel dispensers. Does not include mounting screws (M01118B004).|https://spatco.com/shop/products/gilbarco-m05912a002-nozzle-boot-assembly-with-lift-to-start-handle-on-right-side|https://spatco.com//assets/products/images/M05912A002.jpg|in stock|77.92 USD|5 lb|Gilbarco||new|no| 012040-191-9|012040-191-9|Ameron 012040-191-9 RTIIA RISER PIPE ADAPT 4 BXMN|RTIIA RISER PIPE ADAPT 4 BXMN|https://spatco.com/shop/products/ameron-012040-191-9-red-thread-iia-4-inch-bell-x-male-threaded-adaptor|https://spatco.com//assets/products/images/012040-191-4.jpg|in stock|158.6 USD|3 lb|Ameron||new|no| 22469202|22469202|Ameron 22469202 2-Inch, 45-Degree LCX Containment Elbow (2 Piece Clamshell)|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below. Features of Dualoy 3000/LCX containment systems include: • Filament-wound, fiberglass-reinforced pipe with integral liner; • Compact fittings dimensions to minimize trench excavation; • Smooth exterior pipe surface that eliminates the need for special end preparation tools; • Ready accessibility to and complete inspectability of primary fittings prior to closure of the containment; • Complete testability during installation and at any time thereafter; • Rapid joint makeup with pre-inserted nuts and ambient cure adhesive|https://spatco.com/shop/products/ameron-22469201-2-inch-45-degree-lcx-containment-elbow-2-piece-clamshell|https://spatco.com//assets/products/images/22469202.jpg|in stock|131.71 USD|3.4 lb|Ameron||new|no| 22469201|22469201|Ameron 22469201 2-Inch, 90-Degree LCX Containment Elbow (2 Piece Clamshell)|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below. Features of Dualoy 3000/LCX containment systems include: • Filament-wound, fiberglass-reinforced pipe with integral liner; • Compact fittings dimensions to minimize trench excavation; • Smooth exterior pipe surface that eliminates the need for special end preparation tools; • Ready accessibility to and complete inspectability of primary fittings prior to closure of the containment; • Complete testability during installation and at any time thereafter; • Rapid joint makeup with pre-inserted nuts and ambient cure adhesive|https://spatco.com/shop/products/ameron-22469201-2-inch-90-degree-lcx-containment-elbow-2-piece-clamshell|https://spatco.com//assets/products/images/22469201.jpg|in stock|131.71 USD|3.5 lb|Ameron||new|no| 892121-001|892121-001|Wayne 892121-001 24 Volt Expansion Cable|Replacement 24-volt expansion cable for Ovation QVGA LED display.|https://spatco.com/shop/products/wayne-892121-001-24-volt-expansion-cable|https://spatco.com//assets/products/images/892121-001.jpg|in stock|48.03 USD|0.05 lb|Wayne||new|no| 10RMT-5850|10RMT-5850|OPW 10RMT-5850 1-1/2-Inch NPT Male Threaded Single Poppet Replacement Valve Top|This is a replacement valve top for the OPW 10BM-5825 1-1/2-Inch Male Threaded Top (Outlet) Connection Emergency Shut-Off Valve. Body Size: 1-1/2 Inches/4 cmConnection Threads: NPTPoppet Configuration: SingleApplication: PressureTop Connection: Male|https://spatco.com/shop/products/opw-10rmt-5850-1-1-2-inch-npt-male-threaded-single-poppet-replacement-valve-top|https://spatco.com//assets/products/images/10RMT-5850.jpg|in stock|76.8 USD|5 lb|OPW||new|no| 100-707|100-707|Jomar Valve 100-707 1-1/2-Inch, T-100NE, Full Port, Threaded Connection, 600 WOG Brass Ball Valve|T-100NE Brass Ball Valve, 1-1/2, Full Port, Threaded Connection, 600 WOG, with ISO (F05/F07) Mounting Pad. Blow-out proof stemISO 5211 mounting pad100% leak testedFits any T-100, S-100 or JP-100|https://spatco.com/shop/products/jomar-valve-100-707-1-1-2-inch-t-100ne-full-port-threaded-connection-600-wog-brass-ball-valve|https://spatco.com//assets/products/images/100-707.jpg|in stock|61.45 USD|3.1 lb|Jomar Valve||new|no| T50064-1009|T50064-1009|Gilbarco T50064-1009 MAPCO ADA CRIND Keypad Overlay|This replacement kit is used with the MAPCO Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t50064-1009-mapco-ada-crind-keypad-overlay|https://spatco.com//assets/products/images/T50064-1009.jpg|in stock|27.95 USD|1 lb|Gilbarco||new|no| 66H-1300|66H-1300|OPW 66H-1300 1-inch x 12-Inch Straightening Hose|This hose is third-party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 B-20. Maximum working pressure 50PSI. This whip hose can be used on 66V-1300, 66V-130RF, 66V-1350, and 66V-135RF breakaway valve. Length: 12 in.Connection Size: 1 Male x 1 Male (NPT)Weight: 1.4 lbs.|https://spatco.com/shop/products/opw-66h-1300-1-inch-x-12-inch-straightening-hose|https://spatco.com//assets/products/images/66H-1300.jpg|in stock|64.56 USD|4 lb|OPW||new|no| 514100-210|514100-210|Veeder Root 514100-210 Thermal Printer Paper Rolls for TLS-300, TLS-350, TLS-350 Plus, and TLS-350R (4 Pack)|This product includes four rolls of paper per box.|https://spatco.com/shop/products/veeder-root-514100-210-printer-paper-rolls-for-tls-300-tls-350-tls-350-plus-and-tls-350r-4-pack|https://spatco.com//assets/products/images/514100-210.jpg|in stock|126.21 USD|3 lb|Veeder Root||new|no| APT-FEB-075-D|APT-FEB-075-D|APT FEB-075-D 3/4-Inch Flexible Entry Boot|Flexible entry boot for 3/4 and 1 electrical conduit. The flexible two-piece boot doubles the sealing power of the entry boot. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot.|https://spatco.com/shop/products/apt-apt-feb-075-d-3-4-inch-flexible-entry-boot|https://spatco.com//assets/products/images/FEB-075-D.jpg|in stock|61.33 USD|1.55 lb|APT||new|no| T50064-10|T50064-10|Gilbarco T50064-10 16-Key BP Graphic Keypad Overlay|This replacement kit is used with the BP Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t50064-10-16-key-bp-graphic-keypad-overlay|https://spatco.com//assets/products/images/T50064-10.jpg|in stock|58.15 USD|0.01 lb|Gilbarco||new|no| EBF-0300|EBF-0300|OPW EBF-0300 3-Inch Entry Boot Fitting for 3-Inch DW FlexWorks Pipe|FlexWorks Flexible Entry Boots are reliable, safe seals for pipe and conduit entries into underground containment sumps. These entry boots allow for angled pipe entries and have no exposed metal parts to the underground environment. Primary pipe and access pipe entering the containment sumps may not be perpendicular with the sump wall. Angled entries are generally a result of directional plumbing restrictions on the inside of the containment chamber due to space limitations. Flexible entry boots are flexible enough to permit angled pipe or conduit entries (on two axes) into the sidewall of a containment chamber. All flexible entry boots permit angled entries up to a 15-degree angle off the perpendicular center line in any direction without leaking or putting undue stress on the pipe or conduit seal. |https://spatco.com/shop/products/opw-ebf-0300-3-inch-entry-boot-fitting-for-3-inch-dw-flexworks-pipe|https://spatco.com//assets/products/images/EBF-0300.jpg|in stock|73.87 USD|2 lb|OPW||new|no| 125201C|125201C|Irpco 125201C Hardwall Steelflex 5/8-Inch x 10-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end. TUBE: Gasoline-resistant nitrileREINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-125201c-hardwall-steelflex-5-8-inch-x-10-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/125201C.jpg|in stock|73.98 USD|4.75 lb|Irpco|Black|new|no| 004-300954-|004-300954-|Wayne 004-300954- Pressure Relief Valve, Short Assembly|Replacement check valve and pressure relief assembly.|https://spatco.com/shop/products/wayne-004-300954-pressure-relief-valve-short-assembly|https://spatco.com//assets/products/images/004-300954.jpg|in stock|78.88 USD|0.3 lb|Wayne||new|no| 000-300314-|000-300314-|Wayne 000-300314- Pressure Relief Check Valve Assembly|Used in the Reliance G5200 and G6200 Series Mechanical Registration Fleet Dispensers.|https://spatco.com/shop/products/wayne-000-300314-pressure-relief-check-valve-assembly|https://spatco.com//assets/products/images/000-300314.JPG|in stock|85.78 USD|1.5 lb|Wayne||new|no| 889194-001|889194-001|Wayne 889194-001 Ovation Cable Guide|This replacement part is used to guide the cable in the Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-889194-001-ovation-cable-guide|https://spatco.com//assets/products/images/889194-001.jpg|in stock|9.18 USD|0.75 lb|Wayne||new|no| 125101C|125101C|Irpco 125101C Hardwall Steelflex 5/8-Inch x 8-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end. TUBE: Gasoline-resistant nitrileREINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-125101c-hardwall-steelflex-5-8-inch-x-8-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/125101C.jpg|in stock|65.56 USD|4.6 lb|Irpco|Black|new|no| 22482736|22482736|Ameron 22482736 2-Inch LCX Rubber Closure with Test Port|Dualoy 3000/LCX systems employ a coaxial construction for the pipe wall and specially designed primary and containment fittings. The system provides a complete double-wall enclosure for all product, vent and vapor recovery lines. The “LCX” contained system has been designed for providing a compact profile and easy, fast and reliable installation. “LCX” can be installed in either parallel or series patterns, taking advantage, where possible, of the reduced cost and number of buried fittings afforded by the series pattern. See details below. Features of Dualoy 3000/LCX containment systems include: • Filament-wound, fiberglass-reinforced pipe with integral liner; • Compact fittings dimensions to minimize trench excavation; • Smooth exterior pipe surface that eliminates the need for special end preparation tools; • Ready accessibility to and complete inspectability of primary fittings prior to closure of the containment; • Complete testability during installation and at any time thereafter; • Rapid joint makeup with pre-inserted nuts and ambient cure adhesive|https://spatco.com/shop/products/ameron-22482736-2-inch-lcx-rubber-closure-with-test-port|https://spatco.com//assets/products/images/22482736.jpg|in stock|117.1 USD|0.95 lb|Ameron||new|no| 012020-410-4|012020-410-4|Ameron 012020-410-4 2-Inch, Red Thread IIA Tee Belled Ends|UL971 listed. Used for joining 2 inch primary piping.|https://spatco.com/shop/products/ameron-012020-410-4-2-inch-red-thread-iia-tee-belled-ends|https://spatco.com//assets/products/images/012020-410-4.jpg|in stock|115.21 USD|1.9 lb|Ameron||new|no| 012030-360-4|012030-360-4|Ameron 012030-360-4 Red Thread IIA, 3-Inch, 90-Degree Primary Elbow|This elbow is used for joining three-inch primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-012030-360-4-red-thread-iia-3-inch-90-degree-primary-elbow|https://spatco.com//assets/products/images/012030-360-4.jpg|in stock|118.5 USD|5 lb|Ameron||new|no| 012030-310-4|012030-310-4|Ameron 012030-310-4 Red Thread IIA, 3-Inch, 45-Degree Elbow|This elbow is used for joining three-inch primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-012030-310-4-red-thread-iia-3-inch-45-degree-elbow|https://spatco.com//assets/products/images/012030-310-4.jpg|in stock|118.5 USD|1.8 lb|Ameron||new|no| 888985-001|888985-001|Wayne 888985-001 Ovation Nozzle Boot Assembly Service Kit|Replacement kit for the Ovation nozzle boot.|https://spatco.com/shop/products/wayne-888985-001-ovation-nozzle-boot-assembly-service-kit|https://spatco.com//assets/products/images/888985-001.jpg|in stock|67.03 USD|0.5 lb|Wayne||new|no| 124281C|124281C|Irpco 124281C Hardwall Steelflex 3/4-Inch x 8-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end.TUBE: Gasoline-resistant nitrileREINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-124281c-hardwall-steelflex-3-4-inch-x-8-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/124281C.jpg|in stock|69.78 USD|7 lb|Irpco|Black|new|no| M06975K002|M06975K002|Gilbarco M06975K002 CRIND Keypad Kit|Use to replace Gilbarco Encore keypad customer input. This is to be used with Encore 500 fuel dispenser.|https://spatco.com/shop/products/gilbarco-m06975k002-crind-keypad-kit|https://spatco.com//assets/products/images/M06975K002.jpg|in stock|49.92 USD|0.5 lb|Gilbarco||new|no| ENE1701G142|ENE1701G142|Gilbarco ENE1701G142 ECIM Keypad Overlay for Pilot Encore S Series Dispensers|Use this keypad overlay to replace the ECIM overly for Pilot Encore S series fuel dispensers.|https://spatco.com/shop/products/gilbarco-ene1701g142-ecim-keypad-overlay-for-pilot-encore-s-series-dispensers|https://spatco.com//assets/products/images/ENE1701G142.jpg|in stock|26.43 USD|0.3 lb|Gilbarco|Black|new|no| 072-718-1|072-718-1|Red Jacket 072-718-1 7-1/2-Inch x 8-Inch x 1/4-Inch Packer O-Ring Seal|This is a replacement part for the Red Jacket Standard submersible turbines. This ring is compatible with all standard and alcohol fuels. The Packer O-ring Seal AG is part number 072-542-1.|https://spatco.com/shop/products/red-jacket-072-718-1-7-1-2-inch-x-8-inch-x-1-4-inch-packer-o-ring-seal|https://spatco.com//assets/products/images/072-718-1.jpg|in stock|76.94 USD|3 lb|Red Jacket||new|no| 144-201-5|144-201-5|Red Jacket 144-201-5 Conduit Seal Assembly For Extracta Series|This is a replacement part for the Extracta-series 4 submersible petroleum AG pumps.|https://spatco.com/shop/products/red-jacket-144-201-5-conduit-seal-assembly-for-extracta-series|https://spatco.com//assets/products/images/144-201-5.jpg|in stock|70.81 USD|1 lb|Red Jacket||new|no| M06975K001|M06975K001|Gilbarco M06975K001 Alpha Numeric Keypad Kit|Use with EU03007 series overlays. The kit also includes an adhesive spacer.|https://spatco.com/shop/products/gilbarco-m06975k001-alpha-numeric-keypad-kit|https://spatco.com//assets/products/images/M06975K001.jpg|in stock|42.79 USD|0.1 lb|Gilbarco||new|no| EU03004G014|EU03004G014|Gilbarco EU03004G014 16-Position Universal CRIND Keypad Overlay for Eclipse and Encore S Series Dispensers|Replacement overlay for Encore S and Eclipse card reader in dispenser (CRIND). 5-11/16 x 2-31/32.|https://spatco.com/shop/products/gilbarco-eu03004g014-16-position-universal-crind-keypad-overlay-for-eclipse-and-encore-s-series-dispensers|https://spatco.com//assets/products/images/EU03004G014.jpg|in stock|48.25 USD|0.5 lb|Gilbarco||new|no| EU03004G006|EU03004G006|Gilbarco EU03004G006 Phillips English CRIND Keypad Overlay for Eclipse and Encore S Series Dispensers|Replacement overlay for Encore S and Eclipse card reader in dispenser (CRIND). 5-11/16 x 2-31/32. Works with M00141B002 and M00141B004 Customer Input Keypads.|https://spatco.com/shop/products/gilbarco-eu03004g006-phillips-english-crind-keypad-overlay-for-eclipse-and-encore-s-series-dispensers|https://spatco.com//assets/products/images/EU03004G006.jpg|in stock|43.43 USD|0.5 lb|Gilbarco||new|no| EU03004G001|EU03004G001|Gilbarco EU03004G001 Generic English CRIND Keypad Overly for Eclipse and Encore S Series Dispensers|Replacement overlay for Encore S and Eclipse card reader in dispenser (CRIND). 5-11/16 x 2-31/32.|https://spatco.com/shop/products/gilbarco-eu03004g001-generic-english-crind-keypad-overly-for-eclipse-and-encore-s-series-dispensers|https://spatco.com//assets/products/images/EU03004G001.jpg|in stock|19.43 USD|0.5 lb|Gilbarco||new|no| M08481B001|M08481B001|Gilbarco M08481B001 Gilbarco Monochrome Infoscreen Softkey Keypad with EPP|Use with T50180G overlays.|https://spatco.com/shop/products/gilbarco-m08481b001-gilbarco-monochrome-infoscreen-softkey-keypad-with-epp|https://spatco.com//assets/products/images/M08481B001.jpg|in stock|42.93 USD|0.5 lb|Gilbarco||new|no| GE16|GE16|Gasoila Chemicals GE16 1-Pint Gasoila E-Seal Thread Sealant with Brush|• Non-hardening, non-toxic, opaque, dark green paste designed specifically for ethanol blended gasoline including E10 and E85 (for 100% ethanol or 100% methanol applications - use Gasoila 100).• Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, pump assemblies, oil burners, hydraulics, bolts, compressors, engines, motors, fuel lines and couplings.• For use on brass, copper, stainless steel, aluminum, black pipe, tin and galvanized pipe.• Excellent resistance to gasoline, ethanol blended gasoline such as E10 and E85, petroleum solvents, kerosene diesel oil, BioDiesel propane, jet fuels, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam and potable water.• NOT for use on oxygen.|https://spatco.com/shop/products/gasoila-chemicals-ge16-1-pint-gasoila-e-seal-thread-sealant-with-brush|https://spatco.com//assets/products/images/GE16.jpg|in stock|43.17 USD|2 lb|Gasoila Chemicals|Green|new|no| 03609-01|03609-01|Verifone 03609-01 Epson Printer/Power Y-Cable|This 25-pin connection cable is used to power Ruby terminal and printer.|https://spatco.com/shop/products/verifone-03609-01-epson-printer-power-y-cable|https://spatco.com//assets/products/images/03609-01.jpg|in stock|40.19 USD|0.8 lb|Verifone||new|no| H13214M|H13214M|OPW H13214M 33-Inch Seal for OPW Polyethylene Tank Sump|Replacement seal for OPW Polyethylene Tank Sump, models TSS-4536, TSM-4536, and TSD-4536.|https://spatco.com/shop/products/opw-pisces-h13214m-33-inch-seal-for-opw-polyethylene-tank-sump|https://spatco.com//assets/products/images/H13214M.jpg|in stock|59.06 USD|2 lb|OPW||new|no| 012030-191-4|012030-191-4|Ameron 012030-191-4 3-Inch Bell x Male Red Thread IIA Threaded Adaptor|This bell is 5-1/2 inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012030-191-4-3-inch-bell-x-male-red-thread-iia-threaded-adaptor|https://spatco.com//assets/products/images/012030-191-4.jpg|in stock|94.21 USD|2 lb|Ameron||new|no| M07689B002|M07689B002|Gilbarco M07689B002 ADA CRIND Customer Input Keypad|Use with ENE1701 series overlays.|https://spatco.com/shop/products/gilbarco-m07689b002-ada-crind-customer-input-keypad|https://spatco.com//assets/products/images/M07689B002.jpg|in stock|38.19 USD|0.5 lb|Gilbarco||new|no| R19431-G1|R19431-G1|Gilbarco R19431-G1 Single Level Price Per Gallon with Push Button Overlay|This overlay is used on Conoco, Kangaroo Express, Marathon, Pilot, RaceTrac, and RaceWay fuel dispensers.|https://spatco.com/shop/products/gilbarco-r19431-g1-single-level-price-per-gallon-with-push-button-overlay|https://spatco.com//assets/products/images/R19431-G1.jpg|in stock|45.7 USD|0.5 lb|Gilbarco||new|no| T50180G001|T50180G001|Gilbarco T50180G001 Monochrome Softkey Overlay for EPP|This replacement kit is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t50180g001-monochrome-softkey-overlay-for-epp|https://spatco.com//assets/products/images/T50180G001.jpg|in stock|38.33 USD|0.5 lb|Gilbarco||new|no| 116-7085|116-7085|OPW 116-7085 116 Monitor Pipe Cap|The OPW 116 Pipe Cap threads onto 4 riser pipes and provides access to ball float extractor fittings and underground storage tank bung openings. The 116 is constructed of composite Duratuff to prevent rusting or corroding of steel riser pipes. Body: 4 Duratuff Seal: Nitrile|https://spatco.com/shop/products/opw-116-7085-116-monitor-pipe-cap|https://spatco.com//assets/products/images/116-7085.jpg|in stock|49.76 USD|0.5 lb|OPW||new|no| 001-300954-|001-300954-|Wayne 001-300954- Check And Pressure Relief Valve Assembly With O-Ring|Used in iMeter series modules and assemblies, which are common to all 2/Vista dispensers.|https://spatco.com/shop/products/wayne-001-300954-check-and-pressure-relief-valve-assembly-with-o-ring|https://spatco.com//assets/products/images/001-300954.jpg|in stock|58.45 USD|1.5 lb|Wayne||new|no| 006-128346-|006-128346-|Wayne 006-128346- Diaphragm Only /Hydraulic Valve|Wayne Vista rubber diaphragm, non-blend.|https://spatco.com/shop/products/wayne-006-128346-diaphragm-only-hydraulic-valve|https://spatco.com//assets/products/images/006-128346.jpg|in stock|57.17 USD|0.5 lb|Wayne||new|no| 22839-01|22839-01|Verifone 22839-01 Ruby Cash Drawer Adapter Kit|This in-line adapter allows a Topaz cash drawer to operate on a Ruby system. The 10-pin connector from Topaz cash drawer plugs into the in-line adapter. The output from the adapter is four-pin connector that plugs into the Ruby console.|https://spatco.com/shop/products/verifone-22839-01-ruby-cash-drawer-adapter-kit|https://spatco.com//assets/products/images/22839-01.jpg|in stock|34.33 USD|0.5 lb|Verifone||new|no| M06139A001|M06139A001|Gilbarco M06139A001 Grade Select Button Assembly|This is a replacement Grade Select button for the Encore S fuel dispenser.|https://spatco.com/shop/products/gilbarco-m06139a001-grade-select-button-assembly|https://spatco.com//assets/products/images/M06139A001.jpg|in stock|33.54 USD|1 lb|Gilbarco||new|no| T17622-G6|T17622-G6|Gilbarco T17622-G6 1-Inch LCD Backlight Reflector Assembly|This five-bulb version is used to backlight the main display board displaying the gallons and cost. This unit fits Gilbarco Advantage dispensers.|https://spatco.com/shop/products/gilbarco-t17622-g6-1-inch-lcd-backlight-reflector-assembly|https://spatco.com//assets/products/images/T17622-G6.jpg|in stock|34.92 USD|0.05 lb|Gilbarco||new|no| WM043925-0001|WM043925-0001|Wayne WM043925-0001 O-Ring|Dresser Wayne O-ring.|https://spatco.com/shop/products/wayne-wm043925-0001-o-ring|https://spatco.com//assets/products/images/WM043925-0001.jpg|in stock|17.9 USD|1 lb|Wayne||new|no| 012020-360-4|012020-360-4|Ameron 012020-360-4 2-Inch, Red Thread IIA 90-Degree Elbow|This elbow is used for joining two-inch primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-012020-360-4-2-inch-red-thread-iia-90-degree-elbow|https://spatco.com//assets/products/images/012020-360-4.jpg|in stock|80.71 USD|1.2 lb|Ameron||new|no| 012020-310-4|012020-310-4|Ameron 012020-310-4 2-Inch, Red Thread IIA 45-Degree Elbow|This elbow is used for joining two-inch primary piping. UL971 listed.|https://spatco.com/shop/products/ameron-012020-310-4-2-inch-red-thread-iia-45-degree-elbow|https://spatco.com//assets/products/images/012020-310-4.jpg|in stock|80.71 USD|0.9 lb|Ameron||new|no| 888721-001|888721-001|Wayne 888721-001 I-Meter, O-Ring Installation Kit|Includes seven O-rings. One, 888616-005 gasket (blue), two, 000-905817 gaskets, two, 001-921130 gaskets, and two 888612-001 gaskets. These gaskets can be used on all fuel-type dispensers, including diesel and alternative.|https://spatco.com/shop/products/wayne-888721-001-i-meter-o-ring-installation-kit|https://spatco.com//assets/products/images/888721-001.jpg|in stock|54.78 USD|0.05 lb|Wayne||new|no| 45-5060|45-5060|OPW 45-5060 45-Degree, 3/4-Inch x 3/4-Inch Swivel Hose|The OPW 45 swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience. The swivel is installed between the nozzle and hose to reduce strain, providing flexibility so fueling hoses last longer. 3/4-Inch Male x 3/4-Inch Female. |https://spatco.com/shop/products/opw-45-5060-45-degree-3-4-inch-x-3-4-inch-swivel-hose|https://spatco.com//assets/products/images/45-5060.jpg|in stock|45.18 USD|2.5 lb|OPW||new|no| 125041C|125041C|Irpco 124421C Hardwall Steelflex 5/8-Inch x 4-Foot, Ultra with Chrome Crimped Male Ends|A heavy-duty non-collapsible hardwall hose for dispensing gasoline. This construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With chrome crimped couplings. Males on each end. TUBE: Gasoline-resistant nitrileREINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-124421c-hardwall-steelflex-5-8-inch-x-4-foot-ultra-with-chrome-crimped-male-ends|https://spatco.com//assets/products/images/124421C.jpg|in stock|45.35 USD|2.6 lb|Irpco|Black|new|no| 51110W|51110W|PetroClear 51110W 10-Micron Water Sensing and Particulate Removing Filter, 1-Inch Flow|PetroClear model 51110W is a particulate removing and water sensing spin-on filter designed for aftermarket, cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial applications. The 51110W is designed to remove particulate and to sense both free and emulsified water from neat gasoline, Ethanol blended gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils, lube oils and synthetic fluids. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense or react to water in Ethanol blended gasoline. PetroClear model 51110W filter offers efficient 10 micron (nominal) particulate removal and senses both free and emulsified water. PetroClear model 51110W will not detect phase separation should it occur in Ethanol blended fuels.|https://spatco.com/shop/products/petroclear-51110w-10-micron-water-sensing-and-particulate-removing-filter-1-inch-flow|https://spatco.com//assets/products/images/51110W.jpg|in stock|88.09 USD|8 lb|PetroClear||new|no| 113-105-5|113-105-5|Red Jacket 113-105-5 Male (2-wire) Connector|This replacement male pigtail, two-wire, black yellow part is find in the Yoke Assembly and Conduit Box for 4” Red Jacket Quick-Set and Extracta Submersible Petroleum and AG Pumps.|https://spatco.com/shop/products/red-jacket-113-105-5-male-2-wire-connector|https://spatco.com//assets/products/images/113-105-5.jpg|in stock|43.71 USD|0.1 lb|Red Jacket||new|no| 23740-02-R|23740-02-R|Verifone 23740-02-R Green Mx Data Transfer Cable Adapter|This 2-meter cable (Ethernet USB-Host DB9) is used with the Verifone Mx850, Mx860, Mx870, Mx915, and Mx925. Cable Length: 6.56 ft/2 MetersConnector on First End: USBConnector on Second End: 9-pin DB-9 SerialConductor: Copper|https://spatco.com/shop/products/verifone-23740-02-r-green-mx-data-transfer-cable-adapter|https://spatco.com//assets/products/images/23740-02-R.jpg|in stock|44.29 USD|3 lb|Verifone|Green|new|no| 889987-005|889987-005|Wayne 889987-005 Ovation Softkey QVGA Keypad Display, Right-Four Positions|Made to replace the right side of the Wayne Ovation Softkey Keypad.|https://spatco.com/shop/products/wayne-889987-005-softkey-qvga-keypad-display-right-four-positions|https://spatco.com//assets/products/images/889987-005.jpg|in stock|65.7 USD|0.5 lb|Wayne||new|no| EU03004G071|EU03004G071|Gilbarco EU03004G071 Shell, English, 15-Position, White CRIND Keypad Overly for Eclipse and Encore S Series Dispensers|Replacement overlay for Shell Encore S and Eclipse card reader in dispenser (CRIND). 5-11/16 x 2-31/32. Works with M00141B002 and M00141B004 Customer Input Keypads.|https://spatco.com/shop/products/gilbarco-eu03004g071-shell-english-15-position-white-crind-keypad-overly-for-eclipse-and-encore-s-series-dispensers|https://spatco.com//assets/products/images/EU03004G071.jpg|in stock|28.17 USD|0.05 lb|Gilbarco||new|no| T50064-1139|T50064-1139|Gilbarco T50064-1139 Pilot ADA CRIND Keypad Overlay|This replacement kit is used with the Pilot Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t50064-1139-pilot-ada-crind-keypad-overlay|https://spatco.com//assets/products/images/T50064-1139.jpg|in stock|32.32 USD|0.05 lb|Gilbarco||new|no| 888489-005|888489-005|Wayne 888489-005 Flurosilicone Compound 1932 75 O-Ring|This flurosilicone o-ring is 0.75 inches wide.|https://spatco.com/shop/products/wayne-888489-005-flurosilicon-compound-1932-75-o-ring|https://spatco.com//assets/products/images/888489-005.jpg|in stock|36.28 USD|0.05 lb|Wayne||new|no| 012075-628-0|012075-628-0|Ameron 012075-628-0 3/4-Inch Conduit Split Sump Entry Fitting|This 3/4-inch conduit is used with the 2-inch – 4-inch Red Thread IIA and Dualoy fiberglass pipe as part of the split sump entry fitting (SSEF).|https://spatco.com/shop/products/ameron-012075-628-0-3-4-inch-conduit-split-sump-entry-fitting|https://spatco.com//assets/products/images/012075-628-0.jpg|in stock|41.6 USD|0.4 lb|Ameron||new|no| K90978|K90978|Gilbarco K90978 Switch and Bracket Assembly|This is a replacement start switch and bracket assembly for Legacy, Highline, and MPD fuel dispensers.|https://spatco.com/shop/products/gilbarco-k90978-switch-and-bracket-assembly|https://spatco.com//assets/products/images/K90978.jpg|in stock|48.55 USD|0.1 lb|Gilbarco||new|no| Q12514-11|Q12514-11|Gilbarco Q12514-11 Magnetic Proximity Reed Switch and Cable|This is a replacement part for the Encore grade select and pump handle.|https://spatco.com/shop/products/gilbarco-q12514-11-magnetic-proximity-reed-switch-and-cable|https://spatco.com//assets/products/images/Q12514-11.jpg|in stock|44.73 USD|1.5 lb|Gilbarco||new|no| 123031C|123031C|Irpco 123031C Steelflex Ultra Hardwall Breakaway Whip Hose 1-Inch x 9-Inch|A heavy duty non-collapsible hardwall hose for dispensing gasoline, this construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With zinc/aluminum crimped couplings. TUBE: Gasoline-resistant Nitrile.REINFORCEMENT: High-tensil wire braid.COVER: Black abrasion, oil and weather-resistant blend of Nitrile/PVC.COUPLINGS: Coupled to specifications with IRPCO curb pump hose couplings.|https://spatco.com/shop/products/irpco-steelflex-ultra-hardwall-breakaway-whip-hose-1-inch-x-9-inch|https://spatco.com//assets/products/images/123031C.jpg|in stock|33.07 USD|8 lb|Irpco|Black|new|no| 331-0100AV|331-0100AV|Morrison Bros. 331-0100AV 1-1/2-Inch Union Check Valve|Union check valves are installed inside pipe unions where space is limited and a check valve is desired. • Easy to install in new or existing unions |https://spatco.com/shop/products/morrison-bros-331-0100av-1-1-2-inch-union-check-valve-with-screen|https://spatco.com//assets/products/images/331-0100AV.jpg|in stock|47.73 USD|2 lb|Morrison Bros.||new|no| T17622-G5|T17622-G5|Gilbarco T17622-G5 7/10-Inch LCD Backlight Reflector Assembly|This two-bulb version is for the Advantage/Performer T17962 T17543 displays. The metal reflector length is 2.75 inches. The green boards length is 3.00 inches.|https://spatco.com/shop/products/gilbarco-t17622-g5-7-10-inch-lcd-backlight-reflector-assembly|https://spatco.com//assets/products/images/T17622-G5.jpg|in stock|38.98 USD|0.05 lb|Gilbarco||new|no| 889784-001|889784-001|Wayne 889784-001 OVATION Clamshell and DW-10/DW-12 Printer Gasket|Foam gasket to be used with the Ovation Clamshell Series, DW-10, and DW-12 thermal printers.|https://spatco.com/shop/products/wayne-889784-001-ovation-clamshell-and-dw-10-dw-12-printer-gasket|https://spatco.com//assets/products/images/889784-001.jpg|in stock|32.1 USD|0.05 lb|Wayne||new|no| APT-BPT-200|APT-BPT-200|APT APT-BPT-200 30-Inch Bypass Tube|This bypass tubing can be used with the APT air test regulator (TRK-200).|https://spatco.com/shop/products/apt-apt-bpt-200-30-inch-bypass-tube|https://spatco.com//assets/products/images/APT-BPT-100.jpg|in stock|27.83 USD|2 lb|APT||new|no| DE04|DE04|Gasoila Chemicals DE04 One Quarter Pint Gasoila DEF Thread Sealant with Brush|• DEF (Diesel Exhaust Fluid) Sealant is designed for systems carrying urea-based chemical reactant used in SCR systems (DEF). Gasoila DEF has excellent resistance to a wide variety of chemicals.• Excellent performance with systems handling Diesel Exhaust Fluid, 100% methanol, ethanol, alcohol and ideal for concentrated or dilute acids and caustic alkali, cutting oils, aromatic solvents, glycol/water solutions, coal tar, naphtha, ethylene glycol and keytones.• Use on epoxy type fiberglass pipe manufactured by A.O. Smith, Ameron, Fibercast and Antron.• NOT for use on plastic pipe or oxygen.• Temperature Range: -50°F to +450°F (-46°C to 234°C).• Pressure Range: Up to 10,000 psi when sealing liquids (680 bar) and up to 5,000 psi with gases (340 bar).• For use on NPT Threads.• One year shelf life.|https://spatco.com/shop/products/gasoila-chemicals-de04-one-quarter-pint-gasoila-def-thread-sealant-with-brush|https://spatco.com//assets/products/images/DE04.jpg|in stock|26.51 USD|0.5 lb|Gasoila Chemicals||new|no| 012030-231-4|012030-231-4|Ameron 012030-231-4 3-Inch x 2-Inch, Red Thread IIA Reducer Bushing Taper x Taper|Nominal pipe size: 3-inches x 2-inches. UL971 listed.|https://spatco.com/shop/products/ameron-012030-231-4-3-inch-x-2-inch-red-thread-iia-reducer-bushing-taper-x-taper|https://spatco.com//assets/products/images/012030-231-4.jpg|in stock|44.4 USD|0.65 lb|Ameron||new|no| 22278-100|22278-100|Verifone 22278-100 Green 100-Foot/30.5-Meter Sapphire Ethernet Cable|One-hundred-foot ethernet cable for VeriFone, Sapphire site controller system.|https://spatco.com/shop/products/verifone-22278-100-green-100-foot-30-5-meter-sapphire-ethernet-cable|https://spatco.com//assets/products/images/22278-100.jpg|in stock|36.77 USD|2.1 lb|Verifone|Green|new|no| 100-705|100-705|Jomar Valve 100-705 1-Inch, 2-piece, Full-port, Threaded Connections, 600 WOG Brass Ball Value|Direct-mount, 1, 2-piece ball valve with ISO mounting pad.• Blow-out proof stem• Triple sealing stem with 2 Viton o-rings and Teflon seal• 100% leak tested• Made in Italy|https://spatco.com/shop/products/jomar-valve-100-705-1-inch-2-piece-full-port-threaded-connections-600-wog-brass-ball-value|https://spatco.com//assets/products/images/100-705.jpg|in stock|27.55 USD|1.5 lb|Jomar Valve||new|no| ENE0502G001|ENE0502G001|Gilbarco ENE0502G001 Right-Side Softkey Overlay, White On Black for Encore S Series Dispensers|This is a replacement right-side, softkey overly for the Encore S series fuel dispensers.|https://spatco.com/shop/products/gilbarco-ene0502g001-right-side-softkey-overlay-white-on-black-for-encore-s-series-dispensers|https://spatco.com//assets/products/images/ENE0502G001.jpg|in stock|21.63 USD|0.01 lb|Gilbarco|Black|new|no| 521R-15-H|521R-15-H|Universal Valve 521R-15-H Fusible Link|This replacement part is for the Universal Valve 521 Single Poppet Safety Valve.|https://spatco.com/shop/products/universal-valve-521r-15-h-fusible-link|https://spatco.com//assets/products/images/521R-15-H.jpg|in stock|36.91 USD|1 lb|Universal Valve||new|no| APT-STB-150|APT-STB-150|APT APT-STB-150 1-1/2-Inch Clamshell Secondary Test Boot|APT secondary test boots are designed for testing the integrity of secondary contained flexible piping when using APT clamshell fittings. Each boot has an air chuck for applying air pressure to the secondary containment jacket. Placing a boot on each end of the secondary containment jacket forms an airtight chamber for testing. After the testing is completed, slide the boots back on the pipe to open the secondary system. The boots remain on the pipe available for future testing as required by local regulations. Secondary test boot for XP-150-SC pipe.|https://spatco.com/shop/products/apt-apt-stb-150-1-1-2-inch-clamshell-secondary-test-boot|https://spatco.com//assets/products/images/APT-STB-150.jpg|in stock|31.8 USD|1 lb|APT||new|no| Q12542-01|Q12542-01|Gilbarco Q12542-01 Lock and Key|This is a replacement part for the Advantage Bezel doors.|https://spatco.com/shop/products/gilbarco-q12542-01-lock-and-key|https://spatco.com//assets/products/images/Q12542-01.jpg|in stock|40.72 USD|1 lb|Gilbarco||new|no| WU000473-0001|WU000473-0001|Wayne WU000473-0001 Vista Four-Position, Right, SoftKey, QVGA Keypad|This replacement part is for the Wayne Vista or Ovation fuel dispensers.|https://spatco.com/shop/products/wayne-wu000473-0001-four-position-right-softkey-qvga-keypad|https://spatco.com//assets/products/images/WU000473-0001.jpg|in stock|52.63 USD|1 lb|Wayne||new|no| WU000472-0001|WU000472-0001|Wayne WU000472-0001 Vista Four-Position, Left, SoftKey, QVGA Keypad|This replacement part is for the Wayne Vista or Ovation dispensers.|https://spatco.com/shop/products/wayne-wu000472-0001-four-position-left-softkey-qvga-keypad|https://spatco.com//assets/products/images/WU000472-0001.jpg|in stock|52.63 USD|1 lb|Wayne||new|no| 13836-01|13836-01|Verifone 13836-01 10-Foot, Shielded RS-232 Cable|The shielded Verifone RS232 GEM II RJ45-RJ45 Cable is a VeriFone MX860 Payment Terminal Accessory.|https://spatco.com/shop/products/verifone-13836-01-10-foot-shielded-rs-232-cable|https://spatco.com//assets/products/images/13836-01.JPG|in stock|5.71 USD|1 lb|Verifone||new|no| 012020-231-4|012020-231-4|Ameron 012020-231-4 2-Inch x 1-1/2-Inch, Red Thread IIA Reducer Bushing Female NPT|Nominal pipe size: 2-inches x 1 1/2-inches. UL971 listed.|https://spatco.com/shop/products/ameron-012020-231-4-2-inch-x-1-1-2-inch-red-thread-iia-reducer-bushing-female-npt|https://spatco.com//assets/products/images/012020-231-4.jpg|in stock|54.71 USD|2 lb|Ameron||new|no| FL4|FL4|B and K FL4 12-Foot, 4-Section Folding Lock Joint Tank Gauge Stick|BKs Fold-N-Lock Stick is a great product for those who need portability and have limited storage capacity. These 3-foot sections fold open without the use of any tools and lock in an open position for use. Quality hardwood and tough coatings make this item as durable as the one piece poles. Dull black on 3 sides, for level detection; clear coating on top to protect scale; heavy, solid brass rivets and washer. The industry standard four-piece fuel measuring stick.|https://spatco.com/shop/products/b-k-fl4-12-foot-4-section-folding-lock-joint-tank-gauge-stick|https://spatco.com//assets/products/images/FL4.jpg|in stock|32.54 USD|7 lb|Bagby Gage Stick|Black|new|no| 000-029362-|000-029362-|Wayne 000-029362- Strainer|This is a standard strainer basket assembly.|https://spatco.com/shop/products/wayne-000-029362-strainer|https://spatco.com//assets/products/images/000-029362.jpg|in stock|35.8 USD|0.5 lb|Wayne||new|no| R18810-G1|R18810-G1|Gilbarco R18810-G1 Two-wire J905-J102 D-Box Cable|This cable is used with the Gilbarco distribution box.|https://spatco.com/shop/products/gilbarco-r18810-g1-two-wire-j905-j102-d-box-cable|https://spatco.com//assets/products/images/R18810-G1.jpg|in stock|40.27 USD|1 lb|Gilbarco||new|no| 888341-002|888341-002|Wayne 888341-002 Gasket For Push To Start Panel For Ovation Fuel Dispenser|Gasket For Push To Start Panel (Part No. 888006-01) for Ovation Fuel Dispenser.|https://spatco.com/shop/products/wayne-888341-002-gasket-for-push-to-start-panel-for-ovation-fuel-dispenser|https://spatco.com//assets/products/images/888341-002.jpg|in stock|32.35 USD|0.01 lb|Wayne||new|no| T19760-10|T19760-10|Gilbarco T19760-10 Single-Line ADA CRIND Membrane Switch|This replacement kit is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t19760-10-single-line-ada-crind-membrane-switch|https://spatco.com//assets/products/images/T19760-10.jpg|in stock|23.4 USD|0.05 lb|Gilbarco||new|no| TJ-200A|TJ-200A|OPW Pisces TJ-200A Test Jumper for Air Stems|This jumper connects to the air stem on the FlexWorks test boot and the tank gauge assembly to air-test the interstitial space between the primary and secondary pipe.|https://spatco.com/shop/products/opw-pisces-tj-200a-test-jumper-for-air-stems|https://spatco.com//assets/products/images/TJ17622-G9.jpg|in stock|29.64 USD|0.1 lb|OPW||new|no| M12088A001|M12088A001|Gilbarco M12088A001 Pump Handle Cable|This is a replacement pump handle cable for the Gilbarco DEF dispensers.|https://spatco.com/shop/products/gilbarco-m12088a001-pump-handle-cable|https://spatco.com//assets/products/images/M12088001.jpg|in stock|34.85 USD|0.05 lb|Gilbarco||new|no| 012030-231-7|012030-231-7|Ameron 012030-231-7 3-Inch x 2-Inch, Red Thread IIA Reducer Bushing Scarfed O.D. x Taper I.D.|Female NPT threads.|https://spatco.com/shop/products/ameron-012030-231-7-3-inch-x-2-inch-red-thread-iia-reducer-bushing-scarfed-o-d-x-taper-i-d|https://spatco.com//assets/products/images/012030-231-7.jpg|in stock|32.21 USD|1 lb|Ameron||new|no| 144-193-1|144-193-1|Red Jacket 144-193-1 Modified Packer Discharge Seal|For a tighter seal between the packer and manifold assemblies of 4-inch standard submersible pumps use this seal, which is 1/32-inch larger than the standard seal.|https://spatco.com/shop/products/red-jacket-144-193-1-modified-packer-discharge-seal|https://spatco.com//assets/products/images/144-193-1.jpg|in stock|34.1 USD|1 lb|Red Jacket||new|no| 001-200033-|001-200033-|Wayne 001-200033- Sams Club Specific 3/4-Inch Hose Clamp Assembly|This hose clamp is used exclusively with Sams Club 3/4-inch dispenser hoses.|https://spatco.com/shop/products/wayne-001-200033-sams-club-specific-3-4-inch-hose-clamp-assembly|https://spatco.com//assets/products/images/001-200033.jpg|in stock|18.27 USD|2 lb|Wayne||new|no| 001-126624-|001-126624-|Wayne 001-126624- 10-Foot Nylon Hose Retractor Cable|This cable is part of the hose retractor module for the Global Century G2000 and G2200 series dispensers.|https://spatco.com/shop/products/wayne-001-126624-10-foot-nylon-hose-retractor-cable|https://spatco.com//assets/products/images/001-126624.JPG|in stock|29.53 USD|3 lb|Wayne||new|no| 004-200033-|004-200033-|Wayne 004-200033- 5/8-Inch Hose Clamp Assembly|This hose clamp is used with 5/8-inch dispenser hoses.|https://spatco.com/shop/products/wayne-004-200033-5-8-inch-hose-clamp-assembly|https://spatco.com//assets/products/images/004-200033.jpg|in stock|14.2 USD|0.5 lb|Wayne||new|no| 13642-01|13642-01|Verifone 13642-01 DB25 Null Modem Serial Adapter|The adapter connects to the Wayne Pump Interface Board (PIB) interface port. After the connection is made the adapter should be secured by tightening the screws. An RS232 cable is then connected from the adapter to the appropriate port assigned on the Ruby Controller.|https://spatco.com/shop/products/verifone-13642-01-db25-null-modem-serial-adapter|https://spatco.com//assets/products/images/13642-01.JPG|in stock|16.66 USD|0.05 lb|Verifone||new|no| 27555-01|27555-01|Verifone 27555-01-R Thin Stylus|The VeriFone 27555-01-R signature terminal stylus is suitable for Verifone MX830, MX850, MX860, MX870 and MX880 series.|https://spatco.com/shop/products/verifone-27555-01-r-thin-stylus|https://spatco.com//assets/products/images/27555-01.jpg|in stock|16.54 USD|1.5 lb|Verifone||new|no| H13257M|H13257M|OPW Pisces H13257M Knob for OPW Polyethylene Tank Sump|Replacement knob for OPW Polyethylense Tank Sump, models TSS-4536, TSM-4536, TSM-4842, TSD-4842, and TSD-4536.|https://spatco.com/shop/products/opw-pisces-h13257m-knob-for-opw-polyethylene-tank-sump|https://spatco.com//assets/products/images/H13257M.jpg|in stock|24.16 USD|0.75 lb|OPW||new|no| SS08|SS08|Gasoila Chemicals SS08 Eight-Ounce Gasoila Thread Sealant Soft-Set with PTFE|General purpose sealant, perfect for new pipes. Stays pliable in cold temperatures. Non-hardening, non-separating, non-toxic. Blue gray paste with PTFE. Use with water, steam, natural gas, LPG, propane, gasoline and butane. With all metals and most plastics. CSA, UL, NSF 61, NSF 14.|https://spatco.com/shop/products/gasoila-chemicals-ss08-eight-ounce-gasoila-thread-sealant-soft-set-with-ptfe|https://spatco.com//assets/products/images/ss08.png|in stock|16.56 USD|0.9 lb|Gasoila Chemicals||new|no| 012020-195-4|012020-195-4|Ameron 012020-195-4 2-Inch Spigot x Female, Red Thread IIA Threaded Adaptor|This spigot is 3-7/8 inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012020-195-4-2-inch-spigot-x-female-red-thread-iia-threaded-adaptor|https://spatco.com//assets/products/images/012020-195-4.jpg|in stock|37.9 USD|0.75 lb|Ameron||new|no| 012020-194-4|012020-194-4|Ameron 012020-194-4 2-Inch Bell x Female, Red Thread IIA Threaded Adaptor|This bell is 3-1/2 inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012020-194-4-2-inch-bell-x-female-red-thread-iia-threaded-adaptor|https://spatco.com//assets/products/images/012020-194-4.jpg|in stock|37.9 USD|1 lb|Ameron||new|no| 012020-192-4|012020-192-4|Ameron 012020-192-4 2-Inch Spigot x Male, Red Thread IIA Threaded Adaptor|This spigot is 3-5/8 inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012020-192-4-2-inch-spigot-x-male-red-thread-iia-threaded-adaptor|https://spatco.com//assets/products/images/012020-192-4.jpg|in stock|37.9 USD|2 lb|Ameron||new|no| 012020-191-4|012020-191-4|Ameron 012020-191-4 2-Inch Bell x Male, Red Thread IIA Adaptor|This adaptor measures 4 1/4 inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012020-191-4-2-inch-bell-x-male-red-thread-iia-threaded-adaptor|https://spatco.com//assets/products/images/012020-191-4.jpg|in stock|37.9 USD|1 lb|Ameron||new|no| 001-301673-|001-301673-|Wayne 001-301673- Ovation Membrane Switch For Grade Select Button|This membrane switch for the grade select button is made to fit the Wayne Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-001-301673-ovation-membrane-switch-for-grade-select-button|https://spatco.com//assets/products/images/001-301673.jpg|in stock|18.02 USD|2 lb|Wayne||new|no| 001-201917-|001-201917-|Wayne 001-201917- Cable Assembly, Nozzle Proximity Sensor|Used in Select and Century Electronic Registration 3/G7200 and 3/G2200 dispensers.|https://spatco.com/shop/products/wayne-001-201917-cable-assembly-nozzle-proximity-sensor|https://spatco.com//assets/products/images/001-201917.jpg|in stock|23.68 USD|0.5 lb|Wayne||new|no| 012030-101-8|012030-101-8|Ameron 012030-101-8 3-Inch, Red Thread IIA Sleeve Coupling|Nominal pipe size: 3-inches. This sleeve coupling is six-inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012030-101-8-3-inch-red-thread-iia-sleeve-coupling|https://spatco.com//assets/products/images/012030-101-8.jpg|in stock|36.4 USD|1 lb|Ameron||new|no| 100-704|100-704|Jomar Valve 100-704 3/4-Inch, 2-piece, Full-port, Threaded Connections, 600 WOG Brass Ball Valve|Direct-mount, 3/4, 2-piece ball valve with ISO mounting pad.Blow-out proof stemTriple sealing stem with 2 Viton o-rings and Teflon seal100% leak testedMade in Italy|https://spatco.com/shop/products/jomar-valve-100-704-3-4-inch-2-piece-full-port-threaded-connections-600-wog-brass-ball-value|https://spatco.com//assets/products/images/100-704.jpg|in stock|16.75 USD|0.85 lb|Jomar Valve||new|no| 13638-02|13638-02|Verifone 13638-02 9-pin Null Modem Serial Adapter|This DB-9 adapter connects to RJ45 modular jacks.|https://spatco.com/shop/products/verifone-13638-02-9-pin-null-modem-serial-adapter|https://spatco.com//assets/products/images/13638-02.jpg|in stock|21.46 USD|1.5 lb|Verifone||new|no| 51130P|51130P|PetroClear 51130P 30-Micron Particulate Removing High Flow Filter, 1-Inch Flow|PetroClear 511P filters are particulate removing spin-on filters designed for aftermarket cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial applications. PetroClear model 51130P spin-on filter is designed to remove particulate from neat gasoline, Ethanol blended gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils, lube oils and synthetic fluids. The PetroClear 511P filter series is designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINE. PetroClear model 51130P filter offers efficient 30 micron (nominal) particulate removal. |https://spatco.com/shop/products/petroclear-51130p-30-micron-particulate-removing-high-flow-filter-1-inch-flow|https://spatco.com//assets/products/images/51130P.jpg|in stock|66.43 USD|2.85 lb|PetroClear||new|no| ENE0301G001|ENE0301G001|Gilbarco ENE0301G001 Monochrome Softkey Overlay for Encore S Series Dispensers|Used on the following brands: 76, Circle K, Citgo, Conoco, Kangaroo Express, Marathon, Murphy, Pilot, RaceTrac, Sheetz, Sunoco, and RaceWay.|https://spatco.com/shop/products/gilbarco-ene0301g001-monochrome-softkey-overlay-for-encore-s-series-dispensers|https://spatco.com//assets/products/images/ENE0301G001.jpg|in stock|26.77 USD|2 lb|Gilbarco||new|no| N22945-01|N22945-01|Gilbarco N22945-01 CRIND Display Window|This item is used in a single-line CRIND.|https://spatco.com/shop/products/gilbarco-n22945-01-crind-display-window|https://spatco.com//assets/products/images/N22945-01.jpg|in stock|16.77 USD|0.1 lb|Gilbarco||new|no| 22278-50|22278-50|Verifone 22278-50 Green 50-Foot/15.24-Meter Sapphire Ethernet Cable|Fifty-foot Ethernet cable for VeriFone, Sapphire site controller system.|https://spatco.com/shop/products/verifone-22278-50-green-50-foot-15-24-meter-sapphire-ethernet-cable|https://spatco.com//assets/products/images/Verifone_22278-50.jpg|in stock|19.97 USD|1.05 lb|Verifone|Green|new|no| EU03004G142|EU03004G142|Gilbarco EU03004G142 Pilot, English, 17-Position, CRIND Keypad Overly for Eclipse and Encore S Series Dispensers|Replacement overlay for Pilot Encore S and Eclipse card reader in dispenser (CRIND). 5-11/16 x 2-31/32. Works with M00141B002 and M00141B004 Customer Input Keypads.|https://spatco.com/shop/products/gilbarco-eu03004g142-pilot-english-17-position-crind-keypad-overly-for-eclipse-and-encore-s-series-dispensers|https://spatco.com//assets/products/images/EU03004G142.jpg|in stock|16.56 USD|0.05 lb|Gilbarco||new|no| 23213-01|23213-01|Verifone 23213-01 6-Foot Power Cable for Receipt Printer TMT88/RP310 to Topaz Site Controller System|This item is a replacement printer power cable attachment.|https://spatco.com/shop/products/verifone-23213-01-6-foot-power-cable-for-receipt-printer-tmt88-rp310-to-topaz-site-controller-system|https://spatco.com//assets/products/images/23213-01.jpg|in stock|14.86 USD|2 lb|Verifone||new|no| EU01001G001|EU01001G001|Gilbarco EU01001G001 Universal Standard Graphics Monochrome Softkey Overlay for Eclipse Series Dispensers|This is a universal standard graphic overlay. 8.34 inches x 6.33 inches.|https://spatco.com/shop/products/gilbarco-eu01001g001-universal-standard-graphics-monochrome-softkey-overlay-for-eclipse-series-dispensers|https://spatco.com//assets/products/images/EU01001G001.jpg|in stock|13.2 USD|1 lb|Gilbarco||new|no| T18400-10|T18400-10|Gilbarco T18400-10 Standard, Short Nozzle Cradle / Lift Lever|This replacement nozzle cradle is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t18400-10-standard-short-nozzle-cradle-lift-lever|https://spatco.com//assets/products/images/T18400-10.jpg|in stock|13.27 USD|2 lb|Gilbarco||new|no| 892139-004|892139-004|Wayne 892139-004 750-860MM, A-B USB Cable Assembly|This is a replacement USB 2.0 A-male to B-male cable.|https://spatco.com/shop/products/wayne-892139-004-750-860mm-a-b-usb-cable-assembly|https://spatco.com//assets/products/images/892139-004.jpg|in stock|25.63 USD|1 lb|Wayne||new|no| T50038-134A|T50038-134A|Gilbarco T50038-134A Generic Infoscreen Keypad Overlay|This replacement kit is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t50038-134a-generic-infoscreen-keypad-overlay|https://spatco.com//assets/products/images/T50038-134A.jpg|in stock|12.25 USD|1 lb|Gilbarco||new|no| H15005M|H15005M|OPW H15005M 4-Inch Nitrile Gasket for the 634 Series Tight-Fill Top-Seal Caps|Use this gasket to replace the nitrile gasket that comes with the 634 series Tight-Fill Top-Seal Caps.|https://spatco.com/shop/products/opw-h15005m-4-inch-nitrile-gasket-for-the-634-series-tight-fill-top-seal-caps|https://spatco.com//assets/products/images/H15005M.jpg|in stock|17.01 USD|1 lb|OPW||new|no| SS04|SS04|Gasoila Chemicals SS04 Four-Ounce Gasoila Thread Sealant Soft-Set with PTFE|General purpose sealant, perfect for new pipes. Stays pliable in cold temperatures. Non-hardening, non-separating, non-toxic. Blue gray paste with PTFE. Use with water, steam, natural gas, LPG, propane, gasoline and butane. With all metals and most plastics. CSA, UL, NSF 61, NSF 14.|https://spatco.com/shop/products/gasoila-chemicals-ss04-four-ounce-gasoila-thread-sealant-soft-set-with-ptfe|https://spatco.com//assets/products/images/SS04.jpg|in stock|11.24 USD|1 lb|Gasoila Chemicals||new|no| 40510A-AD|40510A-AD|PetroClear 40510A-AD Alert Model 10-Micron Filter, 1-Inch Flow|PetroClear 40510A-AD is a spin-on filter designed to remove particulate, detect and stop flow of phase separation (Ethanol water) in Ethanol blended fuels. The “Alert” model 40510A-AD is designed to remove particulate and to detect and react to phase separation in Ethanol blended gasoline and slow flow as an indicator to the presence of phase separation. IT WILL NOT SENSE NOR REACT TO WATER IN NON-ALCOHOL BLENDED GASOLINE (NEAT GASOLINE). This filter offers efficient 10 micron (nominal) particulate removal and detects phase separation. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL recognized. |https://spatco.com/shop/products/petroclear-40510a-ad-alert-model-10-micron-filter-1-inch-flow|https://spatco.com//assets/products/images/40510A-AD.jpg|in stock|29.78 USD|2.8 lb|PetroClear||new|no| ENE0402G002|ENE0402G002|Gilbarco ENE0402G002 Left-Side Softkey Overlay, Black on White for Encore S Series Dispensers|This is a replacement left-side, softkey overly for the Encore S series fuel dispensers.|https://spatco.com/shop/products/gilbarco-ene0402g002-left-side-softkey-overlay-black-on-white-for-encore-s-series-dispensers|https://spatco.com//assets/products/images/ENE0402G002.jpg|in stock|12.02 USD|1 lb|Gilbarco|Back on White|new|no| C03647M|C03647M|OPW C03647M Green One-Piece, Newgard™ 11B Hand Insulator|This is a replacement green, one-piece hand insulator for the Astro-B and 11B series fuel dispensers.|https://spatco.com/shop/products/opw-c03647m-green-one-piece-newgard-11b-hand-insulator|https://spatco.com//assets/products/images/C03647M.jpg|in stock|17.8 USD|1 lb|OPW|Green|new|no| WU009759-0001|WU009759-0001|Wayne WU009759-0001 Low-Profile SPM Scanner Cable Assembly|This kit is for the Wayne Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-wu009759-0001-low-profile-spm-scanner-cable-assembly|https://spatco.com//assets/products/images/WU009759-0001.jpg|in stock|17.4 USD|1 lb|Wayne||new|no| E00325M|E00325M|OPW E00325M Green One-Piece, Newgard™ 7B Hand Insulator|This is a replacement green, one-piece hand insulator for the 7B series fuel dispensers.|https://spatco.com/shop/products/opw-e00325m-green-one-piece-newgard-7b-hand-insulator|https://spatco.com//assets/products/images/E00325M.jpg|in stock|13.89 USD|1 lb|OPW|Green|new|no| T19370-12|T19370-12|Gilbarco T19370-12 Push-To-Start Membrane Switch|This replacement kit is used with the Advantage fuel dispensers. This part is used with dual-pricing windows. One button button for cash, one for credit.|https://spatco.com/shop/products/gilbarco-t19370-12-push-to-start-membrane-switch|https://spatco.com//assets/products/images/T19370-12.jpg|in stock|11.77 USD|0.01 lb|Gilbarco||new|no| 012020-101-8|012020-101-8|Ameron 012020-101-8 2-Inch, Red Thread IIA Sleeve Coupling|This sleeve coupling is six-inches in length. UL971 listed.|https://spatco.com/shop/products/ameron-012020-101-8-2-inch-red-thread-iia-sleeve-coupling|https://spatco.com//assets/products/images/012020-101-8.jpg|in stock|25 USD|0.35 lb|Ameron||new|no| T18783-G7|T18783-G7|Gilbarco T18783-G7 Generic Wide-Frame Main Display Overlay|This replacement overlay is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t18783-g7-generic-wide-frame-main-display-overlay|https://spatco.com//assets/products/images/T18783-G7.jpg|in stock|9.52 USD|1 lb|Gilbarco||new|no| T19370-13|T19370-13|Gilbarco T19370-13 Single, Vented Push-To-Start Membrane Switch|This replacement kit is used with the Advantage fuel dispensers.|https://spatco.com/shop/products/gilbarco-t19370-13-single-vented-push-to-start-membrane-switch|https://spatco.com//assets/products/images/T19370-13.jpg|in stock|27.03 USD|0.5 lb|Gilbarco||new|no| 072-240-5|072-240-5|Red Jacket 072-240-5 .210 Discharge Quad Seal O-Ring|This is a non-AG seal. The Discharge Quad Seal AG is product number 076-380-5.|https://spatco.com/shop/products/red-jacket-072-240-5-210-discharge-quad-seal-o-ring|https://spatco.com//assets/products/images/072-240-5.jpg|in stock|15.56 USD|1 lb|Red Jacket||new|no| 000-918919-|000-918919-|Wayne 000-918919- Magnet|This magnet is used on the nozzle boot assembly for the Reliance S1 AST fleet model G6101D remote dispenser.|https://spatco.com/shop/products/wayne-000-918919-magnet|https://spatco.com//assets/products/images/000-918919.JPG|in stock|15.65 USD|1 lb|Wayne||new|no| 001-202022-|001-202022-|Wayne 001-202022- Ovation and Vista Bezel Door Key|Torx tamper-proof screw-head key used in Select and Century Electronic Registration 3/G7200 and 3/G2200 dispensers.|https://spatco.com/shop/products/wayne-001-202022-ovation-and-3vista-bezel-door-key|https://spatco.com//assets/products/images/001-202022.jpg|in stock|14.6 USD|2 lb|Wayne||new|no| 001-300967-|001-300967-|Wayne 001-300967- iMeter Strainer|Used in iMeter series modules and assemblies, which are common to all Ovation2/Vista dispensers.|https://spatco.com/shop/products/wayne-001-300967-new-style-strainer|https://spatco.com//assets/products/images/001-300967.jpg|in stock|57 USD|2 lb|Wayne||new|no| 22278-25|22278-25|Verifone 22278-25 Green 25-Foot/7.6-Meter Sapphire Ethernet Cable|Twenty-five-foot Ethernet cable for VeriFone Sapphire site controller system.|https://spatco.com/shop/products/verifone-22278-25-green-25-foot-7-6-meter-sapphire-ethernet-cable|https://spatco.com//assets/products/images/22278-25.jpg|in stock|13.84 USD|0.55 lb|Verifone|Green|new|no| 172-003-5|172-003-5|Red Jacket 172-003-5 Functional Element O-Ring Kit|Replacement part for Red Jacket “Extracta” Remote Gasoline Pumps, Models P75S17-3, P150S17-3 X4P150S17.|https://spatco.com/shop/products/red-jacket-172-003-5-functional-element-o-ring-kit|https://spatco.com//assets/products/images/172-003-5.jpg|in stock|13.73 USD|0.01 lb|Red Jacket||new|no| 40530W-AD|40530W-AD|PetroClear 40530W-AD 30-Micron Water Sensing Filter, 1-Inch Flow|PetroClear model 40530W-AD is a particulate removing and water sensing spin-on filter designed to remove particulate and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense nor react to water in Ethanol blended gasoline. (Reaction known as phase separation). This filter offers efficient 10 micron (nominal) particulate removal and senses both free and emulsified water in neat gasoline and diesel fuels. Will not detect phase separation in Ethanol blended fuels. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL recognized. |https://spatco.com/shop/products/petroclear-40530w-ad-30-micron-water-sensing-filter-1-inch-flow|https://spatco.com//assets/products/images/40530W-AD.jpg|in stock|24.89 USD|4.6 lb|PetroClear||new|no| 40510W-AD|40510W-AD|PetroClear 40510W-AD 10-Micron Water Sensing Filter, 1-Inch Flow|PetroClear model 40510W-AD is a particulate removing and water sensing spin-on filter designed to remove particulate and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense nor react to water in Ethanol blended gasoline. (Reaction known as phase separation). This filter offers efficient 10 micron (nominal) particulate removal and senses both free and emulsified water in neat gasoline and diesel fuels. Will not detect phase separation in Ethanol blended fuels. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL recognized. |https://spatco.com/shop/products/petroclear-40510w-ad-10-micron-water-sensing-filter-1-inch-flow|https://spatco.com//assets/products/images/40510W-AD.jpg|in stock|24.64 USD|2.8 lb|PetroClear||new|no| 887693-005|887693-005|Wayne 887693-005 Printer Door Key|Two keys per pack. Used on the Wayne Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-887693-005-printer-door-key|https://spatco.com//assets/products/images/887693-005.jpg|in stock|12.07 USD|2 lb|Wayne||new|no| H14460M|H14460M|OPW H14460M One Bolt for Grey, Bolt-Down, WT Series Manhole Covers|The gray, bolt-down WT-series of OPW manhole covers has spots for four bolts. This is a single replacement bolt for that cover.|https://spatco.com/shop/products/opw-h14460m-one-bolt-for-grey-bolt-down-wt-series-manhole-covers|https://spatco.com//assets/products/images/H14460M.jpg|in stock|10.87 USD|0.45 lb|OPW|Grey|new|no| 012020-004-5|012020-004-5|Ameron 012020-004-5 2x 4 Nipple|2x 4 nipple for connecting piping for underground fuel installations.|https://spatco.com/shop/products/ameron-012020-004-5-2x-4-nipple|https://spatco.com//assets/products/images/012020-004-5.jpg|in stock|18.4 USD|1 lb|Ameron||new|no| D01532M|D01532M|OPW D01532M Black 2-Piece 11B Nozzle Hand Insulator|This replacement insulator is part of the two-piece Newgard™ Full Hand Insulator system. This does not include the black plastic handle (D01530M).|https://spatco.com/shop/products/opw-d01532m-black-2-piece-11b-nozzle-hand-insulator|https://spatco.com//assets/products/images/D01532M.jpg|in stock|11.67 USD|0.5 lb|OPW|Black|new|no| 888717-001|888717-001|Wayne 888717-001 85-94 Octane / Diesel Actuator Decal Sheet|Decal sheet for Ovation fuel dispensers. Octane 85 through 94, plus Diesel, and Diesel #2 decals.|https://spatco.com/shop/products/wayne-888717-001-85-94-octane-diesel-actuator-decal-sheet|https://spatco.com//assets/products/images/888717-001.jpg|in stock|25.77 USD|1.5 lb|Wayne||new|no| R19431-G114|R19431-G114|Gilbarco R19431-G114 Advantage Overlay|This overlay is used on Exxon fuel dispensers.|https://spatco.com/shop/products/gilbarco-r19431-g114-advantage-overlay|https://spatco.com//assets/products/images/R19431-G114.jpg|in stock|36.56 USD|0.3 lb|Gilbarco||new|no| 40530W|40530W|PetroClear 40530W 30-Micron Water Sensing Filter, 3/4-Inch Flow|PetroClear model 40530W is a particulate removing and water sensing spin-on filters designed to remove particulate and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter is designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense nor react to water in Ethanol blended gasoline. (Reaction known as phase separation) This filter offers efficient 30 micron (nominal) particulate removal and senses both free and emulsified water in neat gasoline and diesel fuels. Textured paint coating helps ensure a simple, mess-free installation and removal process. UL recognized. Will not detect phase separation in Ethanol blended fuels. |https://spatco.com/shop/products/petroclear-40530w-30-micron-water-sensing-filter-3-4-inch-flow|https://spatco.com//assets/products/images/40530W.jpg|in stock|29.74 USD|3 lb|PetroClear||new|no| 006-038765-|006-038765-|Wayne 006-038765- iMeter End Cap|Used in Wayne Reliance G5200 and G6200 Series Mechanical Registration Fleet Dispensers. CAD plate.|https://spatco.com/shop/products/wayne-006-038765-imeter-end-cap|https://spatco.com//assets/products/images/006-038765.jpg|in stock|9.97 USD|0.45 lb|Wayne||new|no| D01530M|D01530M|OPW D01530M Black Plastic Hand Insulator Barrel For 11A And 11B Series Nozzles|This replacement plastic barrel is part of the two-piece Newgard™ Full Hand Insulator system.|https://spatco.com/shop/products/opw-d01530m-black-plastic-hand-insulator-barrel-for-11a-and-11b-series-nozzles|https://spatco.com//assets/products/images/D01530M.jpg|in stock|6.19 USD|1 lb|OPW|Black|new|no| Q12974-118|Q12974-118|Gilbarco Q12974-118 1.234-Inch x 0.139-Inch O-ring|This is a replacement O-ring for use in the CFT meter, manifold and valve assembly for the Atlas Series pumps and dispensers.|https://spatco.com/shop/products/gilbarco-q12974-118-1-234-inch-x-0-139-inch-o-ring|https://spatco.com//assets/products/images/Q12974-118.jpg|in stock|20.23 USD|2 lb|Gilbarco||new|no| 22278-10|22278-10|Verifone 22278-10 Green 10-Foot/3.4-Meter Sapphire Ethernet Cable|Ten-foot ethernet cable for VeriFone Sapphire site controller system.|https://spatco.com/shop/products/verifone-22278-10-green-10-foot-3-4-meter-sapphire-ethernet-cable|https://spatco.com//assets/products/images/22278-10.JPG|in stock|6.13 USD|0.5 lb|Verifone|Green|new|no| 002990-033-0|002990-033-0|Ameron 002990-033-0 Filler For 8069 Adhesive|This thickening agent is used to increase viscosity of 8069 adhesive. Traditionally used for bonding secondary containment fittings.|https://spatco.com/shop/products/ameron-002990-033-0-filler-for-8069-adhesive|https://spatco.com//assets/products/images/002990-033-0.jpg|in stock|5.9 USD|0.65 lb|Ameron||new|no| 892645-001-001|892645-001-001|Wayne 892645-001-001 Generic SPM Keypad Left-Hand Softkey Overlay|This is a blank generic overlay for the Wayne Vista keypad.|https://spatco.com/shop/products/wayne-892645-001-001-generic-spm-keypad-left-hand-softkey-overlay|https://spatco.com//assets/products/images/892645-001-001.jpg|in stock|4.54 USD|0.01 lb|Wayne||new|no| Q11482|Q11482|Gilbarco Q11482 Cleaning Card|This presaturated, disposable cleaning card is designed to clean effectively by removing dirt, magnetic oxides, oils, lotions, and other contaminents from all types of concealed magnetic, photo, and optic sensors on all types of card readers.|https://spatco.com/shop/products/gilbarco-q11482-cleaning-card|https://spatco.com//assets/products/images/Q11482.jpg|in stock|3.7 USD|0.8 lb|Gilbarco||new|no| 888460-001-009|888460-001-009|Wayne 888460-001-009 Ovation 93 OctanePush Here Overlay|93 Octane overlay decal for Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-888460-001-009-ovation-93-octanepush-here-overlay|https://spatco.com//assets/products/images/888460-001-009.jpg|in stock|6.9 USD|2 lb|Wayne||new|no| 888460-001-008|888460-001-008|Wayne 888460-001-008 Ovation 92 OctanePush Here Overlay|92 Octane overlay decal for Ovation fuel dispenser.|https://spatco.com/shop/products/wayne-888460-001-008-ovation-92-octanepush-here-overlay|https://spatco.com//assets/products/images/888460-001-008.jpg|in stock|6.9 USD|0.01 lb|Wayne||new|no| 003-201800-013|003-201800-013|Wayne 003-201800-013 93 Octane Switch Graphic|Used in Wayne Vista series. 3.55 inches X 1.18 inches.|https://spatco.com/shop/products/wayne-003-201800-013-93-octane-switch-graphic|https://spatco.com//assets/products/images/003-201800-013.jpg|in stock|6.9 USD|0.5 lb|Wayne||new|no| 003-201800-009|003-201800-009|Wayne 003-201800-009 89 Octane Switch Graphic|Used in Wayne Vista series. 3.55 inches X 1.18 inches.|https://spatco.com/shop/products/wayne-003-201800-009-89-octane-switch-graphic|https://spatco.com//assets/products/images/003-201800-009.jpg|in stock|6.9 USD|0.5 lb|Wayne||new|no| 003-201800-007|003-201800-007|Wayne 003-201800-007 87 Octane Switch Graphic|Used in Wayne Vista series. 3.55 inches X 1.18 inches.|https://spatco.com/shop/products/wayne-003-201800-007-87-octane-switch-graphic|https://spatco.com//assets/products/images/003-201800-007.jpg|in stock|6.9 USD|0.5 lb|Wayne||new|no| 001-300927-|001-300927-|Wayne 001-300927- Spring Nozzle Boot Assembly|This is a replacement spring to be used on Wayne dispenser nozzle boots.|https://spatco.com/shop/products/wayne-001-300927-spring-nozzle-boot-assembly|https://spatco.com//assets/products/images/001-300927.jpg|in stock|4.53 USD|1 lb|Wayne||new|no| 000-918391-003|000-918391-003|Wayne 000-918391-003 Clip-On Captive Screw Receptacle|This clip-on receptacle is used with captive screw fasteners for Ovation lower door panel.|https://spatco.com/shop/products/wayne-000-918391-003-clip-on-captive-screw-receptacle|https://spatco.com//assets/products/images/000-918391-003.jpg|in stock|4.53 USD|0.05 lb|Wayne||new|no| Q12929-02|Q12929-02|Gilbarco Q12929-02 13 Watt Fluorescent Lamp|This is a replacement 13 Watt fluorescent lamp bulb.|https://spatco.com/shop/products/gilbarco-q12929-02-13-watt-fluorescent-lamp|https://spatco.com//assets/products/images/Q12929-02.jpg|in stock|2.92 USD|0.1 lb|Gilbarco||new|no| WU001158-0002|WU001158-0002|Wayne WU001158-0002 Push-To-Start Switch Gasket|This is a replacement gasket for the Push-to-Start switch.|https://spatco.com/shop/products/wayne-wu001158-0002-push-to-start-switch-gasket|https://spatco.com//assets/products/images/WU001158-0002.jpg|in stock|4.37 USD|0.01 lb|Wayne||new|no| 70122|70122|Cim-Tek 70122 Model 300MB-10, 3/4 inch flow 10 Micron Filter|Cim-Tek 70122 is a multi-fuel filter that removes particulates while also detecting phase separation in both straight gasoline and ethanol blends up to E15. Phase separation can occur when even small amounts of ethanol in gasoline come in contact with water. The 70122 is a 10 micron Microglass filter for the finest in filtration and measures 3 11/16 X 5 1/4 with a 1-12 nose thread (where the filter screws on). |https://spatco.com/shop/products/cim-tek-70122-model-300mb-10-3-4-inch-flow-10-micron-bio-tek-multi-fuel-monitor-particulate-removal-phase-separation-detection-filter-for-straight-gasoline-and-ethanol-blends-up-to-e15|https://spatco.com//assets/products/images/70122.jpg|in stock|12.94 USD|1.2 lb|Central Illinois||new|no| 70120|70120|Cim-Tek 70120 Model 400MB-10, 1 inch flow 10 Micron Filter|The Cim-Tek 70120 is a multi-fuel filter that removes particulates while also detecting phase separation in both straight gasoline and ethanol blends up to E15. Phase separation can occur when even small amounts of ethanol in gasoline come in contact with water. |https://spatco.com/shop/products/cim-tek-70120-model-400mb-10-1-inch-flow-10-micron-bio-tek-multi-fuel-monitor-particulate-removal-phase-separation-detection-filter-for-straight-gasoline-and-ethanol-blends-up-to-e15|https://spatco.com//assets/products/images/70120.jpg|in stock|14.01 USD|1.2 lb|Central Illinois||new|no| 70106|70106|Cim-Tek 70106 Model 400MB-30, 1 inch flow 30 Micron Filter|The 70106 filter is a multi-fuel filter that can remove particulates while detecting phase separation in ethanol blends up to E15 AND water in straight gasoline. Phase separation can occur when gasoline containing even small amounts of ethanol come in contact with water. The 70106 is a 30 micron filter made of microglass for the finest in filtration. It removes such common contaminants as dirt, dust, and rust while detecting phase separation. |https://spatco.com/shop/products/cim-tek-70106-model-400mb-30-1-inch-flow-30-micron-bio-tek-multi-fuel-monitor-particulate-removal-phase-separation-detection-filter-for-straight-gasoline-and-ethanol-blends-up-to-e15|https://spatco.com//assets/products/images/70106.jpg|in stock|13.67 USD|1.2 lb|Central Illinois||new|no| 70076|70076|Cim-Tek 70076 Model 450HS-30, 1 inch flow 30 Micron Hydrosorb / Particulate Removal Extended Life Filter|If you need both particulate removal plus water absorption, the 70076 can handle both. The filter is extra long for extra life over the 400HS-30 model. This 30 micron Hydrosorb® filter is designed to remove common contaminants such as dirt, dust, and rust. The Hydrosorb® media swells when water is present keeping water from getting into your fuel. The more water that is absorbed, the more the media swells, slowing the flow and alerting you that the filter needs to be changed. The spin-on design makes change-out quicker and easier. |https://spatco.com/shop/products/cim-tek-70076-model-450hs-30-1-inch-flow-30-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps-extended-length-for-longer-life|https://spatco.com//assets/products/images/70076.jpg|in stock|16.33 USD|3.7 lb|Central Illinois||new|no| 70065|70065|Cim-Tek 70065 Model 400HS-30, 1 inch flow 30 Micron Hydrosorb / Particulate Removal Filter|Designed for particulate removal plus water absorption, Cim-Teks 70065 30 micron Hydrosorb® filter offers the finest in filtration. The microglass/cellulose media is combined with a super-absorbent that absorbs water as the fuel passes through the filter. As water is detected, the media swells restricting the flow to let you know it is time to change your filter. With its spin-on design, change-out has never been easier. |https://spatco.com/shop/products/cim-tek-70065-model-400hs-30-1-inch-flow-30-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70065.jpg|in stock|11.3 USD|2 lb|Central Illinois||new|no| 70064|70064|Cim-Tek 70064 Model 300HS-30, 3/4 inch flow 30 Micron Hydrosorb / Particulate Removal Filter|The 70064 Hydrosorb® 30 micron spin-on filter combines particulate removal and water detection. It removes common contaminants such as dirt, dust, and rust while also detecting water. For use with gasoline, diesel, biodiesel blends up to B20, and ultra-low sulfur diesel (ULSD).|https://spatco.com/shop/products/cim-tek-70064-model-300hs-30-3-4-inch-flow-30-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70064.jpg|in stock|10.53 USD|1.2 lb|Central Illinois||new|no| 70060|70060|Cim-Tek 70060 Model 400HS-10, 1 inch flow 10 Micron Hydrosorb / Particulate Removal Filter|The 70060 is a 10 micron Hydrosorb (water absorbing) filter designed to remove dirt, dust and rust. In addition to those contaminant removals the super-absorbent polymer absorbs water as the fuel passes through. |https://spatco.com/shop/products/cim-tek-70060-model-400hs-10-1-inch-flow-10-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70060.jpg|in stock|11.59 USD|1.5 lb|Central Illinois||new|no| 70059|70059|Cim-Tek 70059 Model 300HS-10, 3/4 inch flow 10 Micron Hydrosorb / Particulate Removal Filter|Cim-Tek combines particulate removal and water detection with its 70059 Hydrosorb® 10 micron spin-on filter. It removes common contaminants such as dirt, dust, and rust while also detecting water. For use with gasoline, diesel, biodiesel blends up to B20, and ultra-low sulfur diesel (ULSD).|https://spatco.com/shop/products/cim-tek-70059-model-300hs-10-3-4-inch-flow-10-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70059.jpg|in stock|10.56 USD|1.8 lb|Central Illinois||new|no| 70020|70020|Cim-Tek 70020 Model 800-30, 1 inch flow 30 Micron High-Flow/High Volume Particulate Removal filter|For commercial, high flow, and fuel polishing applications, Cim-Teks spin-on 70020 is designed to remove common contaminants such as dirt, dust, and rust. Its 30 micron cellulose media is compatible with gasoline, diesel, biodiesel, and ultra-low sulfur diesel (ULSD). For double the flow, Cim-Tek offers a dual adaptor for mounting 2 filters. The 70020 measures 5 X 11 and has a 1-1/2-16 nose thread (where the filter screws on). |https://spatco.com/shop/products/cim-tek-70020-model-800-30-1-inch-flow-30-micron-high-flow-high-volume-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70020.jpg|in stock|22.13 USD|1.5 lb|Central Illinois||new|no| 70018|70018|Cim-Tek 70018 Model 300MB-30, 3/4 inch flow 30 Micron Bio-Tek Filter|If youve ever experienced water or phase separation in your fuel, you know what a costly problem that can be. The 70018 filter removes particulates (dirt, dust, and rust) while also detecting phase separation and water in straight gasoline and ethanol blends up to E15. When phase separation or water is detected, the filter will slow the flow dramatically letting you know attention is needed. This revolutionary design makes it a one of a kind product. |https://spatco.com/shop/products/cim-tek-70018-model-300mb-30-3-4-inch-flow-30-micron-bio-tek-multi-fuel-monitor-particulate-removal-phase-separation-detection-filter-for-straight-gasoline-and-ethanol-blends-up-to-e15|https://spatco.com//assets/products/images/70018.jpg|in stock|13.16 USD|2.5 lb|Central Illinois||new|no| 70016|70016|Cim-Tek 70016 Model 400-30, 1 inch flow 30 Micron Spin-on Particulate Removal filter|The 70016 is a 30 micron cellulose spin-on filter. It can remove contaminants such as dirt, dust, and rust from your fuel. This filter is compatible with gasoline, diesel, biodiesel, ultra-low sulfur diesel (ULSD). |https://spatco.com/shop/products/cim-tek-70016-model-400-30-1-inch-flow-30-micron-spin-on-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70016.jpg|in stock|9.64 USD|1.3 lb|Central Illinois||new|no| 70015|70015|Cim-Tek 70015 Model 400-10, 1 inch flow 10 Micron Spin-on Particulate Removal Filter|The 70015 is a 10 micron particulate removing cellulose filter designed to remove dirt, dust, and rust. It is compatible with gasoline, diesel, biodiesel, and ultra-low sulfur diesel (ULSD). It measures 3-3/4 X 5-1/2, it has a 1-1/2-16 nose thread (where the filter screws on). |https://spatco.com/shop/products/cim-tek-70015-model-400-10-1-inch-flow-10-micron-spin-on-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70015.jpg|in stock|9.79 USD|1.4 lb|Central Illinois||new|no| 70012|70012|Cim-Tek 70012 Model 300-30, 30-Micron Spin-on Particulate Removal Filter|The 70012 is a 30 micron cellulose spin-on filter designed to remove dirt, dust, and rust. It is compatible with gasoline, diesel, biodiesel, and ultra-low sulfur diesel (ULSD). It measures 3-11/16 X 5-1/4, it has a 1-12 nose thread (where the filter screws on). |https://spatco.com/shop/products/cim-tek-70012-model-300-30-3-4-inch-flow-30-micron-spin-on-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70012.jpg|in stock|7.71 USD|1.3 lb|Central Illinois||new|no| 70010|70010|Cim-Tek 70010 Model 300-10 3/4-Inch, 10-Micron Spin-on Particulate Filter|The 70010 is a 10 micron cellulose spin-on filter designed to remove dirt, dust, and rust. It is compatible with gasoline, diesel, biodiesel, and ultra-low sulfur diesel (ULSD). It measures 3-11/16 X 5-1/4. 3/4 screw-on thread. Applications include: • Above ground storage tanks • Transfer tanks • Day-use tanks • Gravity flow applications • Transfer pumps |https://spatco.com/shop/products/cim-tek-70010-model-300-10-3-4-inch-flow-10-micron-spin-on-particulate-filter-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70010.jpg|in stock|7.93 USD|1.3 lb|Central Illinois||new|no| 177610-03|177610-03|Husky VIIIS 177610-03 1 inch Heavy Duty Diesel Nozzle with Three Position Hold Open Clip and Waffle Splash Guard - Green|The Husky VIIIS 177610-03 Heavy Duty Diesel Nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. Ships with three notch hold open clip, waffle splash guard and spout bushing.|https://spatco.com/shop/products/husky-viiis-177610-03-1-inch-heavy-duty-diesel-nossle-with-three-position-hold-open-clip-and-waffle-splash-guard-green|https://spatco.com//assets/products/images/177610-03.jpg|in stock|127.65 USD|9 lb|Husky|Green|new|no| 159504-16|159504-16|Husky XS 159504-16 3/4 inch Unleaded Automatic Shut-Off Nozzle - BP Green|The Husky XS 159504-16 unleaded gasoline nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Product ships with three notch hold open clip. |https://spatco.com/shop/products/husky-xs-159504-16-3-4-inch-unleaded-automatic-shut-off-nozzle-comes-with-three-position-hold-open-clip-bp-green|https://spatco.com//assets/products/images/159504-16.jpg|in stock|80.83 USD|5 lb|Husky|Green|new|no| 159504-04|159504-04|Husky XS 159504-04 3/4 inch Unleaded Automatic Shut-Off Nozzle - Black|The Husky XS 159504-04 unleaded gasoline nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This gasoline nozzle is also built with StreamShaper®, which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip. |https://spatco.com/shop/products/husky-xs-159504-04-3-4-inch-unleaded-automatic-shut-off-nozzle-comes-with-three-position-hold-open-clip-black|https://spatco.com//assets/products/images/159504-04.jpg|in stock|80.83 USD|3.1 lb|Husky|Black|new|no| 159504-03|159504-03|Husky XS 159504-03 3/4 inch Unleaded Automatic Shut-Off Nozzle - Green|The Husky XS 159504-03 unleaded gasoline nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip.|https://spatco.com/shop/products/husky-xs-159504-03-3-4-inch-unleaded-automatic-shut-off-nozzle-comes-with-three-position-hold-open-clip-green|https://spatco.com//assets/products/images/159504-03.jpg|in stock|87.86 USD|5 lb|Husky|Green|new|no| 159503-04|159503-04|Husky XS 159503-04 3/4 inch Light Duty Diesel Nozzle with Three Position Hold Open Clip - Black|The Husky XS 159503-04 light duty diesel nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip.|https://spatco.com/shop/products/husky-xs-159503-04-3-4-inch-light-duty-diesel-nozzle-with-three-position-hold-open-clip-black|https://spatco.com//assets/products/images/159503-04.jpg|in stock|78.33 USD|5 lb|Husky|Black|new|no| 159503-03|159503-03|Husky XS 159503-03 3/4 inch Light Duty Diesel Nozzle with Three Position Hold Open Clip - Green|The Husky XS 159503-03 light duty diesel nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper®, which reduces back splash and helps promote quicker, more hassle-free fueling. Also ships with three notch hold open clip.|https://spatco.com/shop/products/husky-xs-159503-03-3-4-inch-light-duty-diesel-nozzle-with-three-position-hold-open-clip-green|https://spatco.com//assets/products/images/159503-03.jpg|in stock|78.33 USD|3.1 lb|Husky|Green|new|no| 8G-0100|8G-0100|OPW 8G-0100 Splash Guard for 11A and 11B -Green|OPW FILLGARD™ Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back. |https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-green|https://spatco.com//assets/products/images/8G-0100.jpg|in stock|6.05 USD|0.25 lb|OPW|Green|new|no| 8BL-0400|8BL-0400|OPW - Splash Guard for 11A and 11B (Black)|OPW - Fillguard™ Splash Guards - designed to enhance overall nozzle appearance and protect customers from product splash back. Wont crack or warp in winter weather. |https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-black|https://spatco.com//assets/products/images/8BL-0400.jpg|in stock|6.57 USD|1 lb|OPW|Black|new|no| 7HB-0400|7HB-0400|OPW 7HB-0400 1 inch Pressurized High Flow Nozzle with Spout Ring - Black|1 inch Pressure Activated High-Speed Nozzle with spout ring. Mainly used with high flow truck and fleet fueling applications. Black Handwarmer. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene.|https://spatco.com/shop/products/opw-7hb-0400-1-inch-pressurized-high-flow-nozzle-with-spout-ring-black|https://spatco.com//assets/products/images/7HB-0400.jpg|in stock|181.71 USD|8 lb|OPW|Black|new|no| 7HB-0100|7HB-0100|OPW 7HB-0100 1-Inch Pressurized High-Flow Nozzle with Spout Ring - Green|1-inch Pressure Activated High-Speed Nozzle with spout ring. Mainly used with high flow truck and fleet fueling applications. Green Handwarmer. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene.|https://spatco.com/shop/products/opw-7hb-0100-1-inch-pressurized-high-flow-nozzle-with-spout-ring-green|https://spatco.com//assets/products/images/7HB-0100.jpg|in stock|152.54 USD|6 lb|OPW|Green|new|no| 11BP-0100|11BP-0100|OPW 11BP-0100 Unleaded Automatic Nozzle - Green|The OPW 11BP® Series is designed for use in retail and commercial filling applications including prepay, self and full service, credit/debit card readers or card-lock systems to help prevent gasoline spills. The OPW 11BP® will not open until the pumping system is pressurized, and closes automatically when the pressure is removed. Nozzle compatible up to E10 (10% Ethanol). Unleaded nozzles are designed for appropriate flow rates and have smaller diameter spouts than diesel or leaded gasoline spouts.|https://spatco.com/shop/products/opw-11bp-0100-unleaded-automatic-nozzle-green|https://spatco.com//assets/products/images/11BP-0100.jpg|in stock|91.82 USD|8 lb|OPW|Green|new|no| 11B-0400|11B-0400|OPW 11B-0400 Leaded Prepay Nozzle - Black|The OPW 11B® Series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. Leaded nozzles have larger diameter spouts than unleaded gasoline nozzle spouts.|https://spatco.com/shop/products/opw-11b-0400-leaded-prepay-nozzle-black|https://spatco.com//assets/products/images/11B-0400.jpg|in stock|90.91 USD|5 lb|OPW|Black|new|no| 11B-0100|11B-0100|OPW 11B-0100 Leaded Prepay Nozzle - Green|The OPW 11B® Series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. Leaded nozzles have larger diameter spouts than unleaded gasoline nozzle spouts.|https://spatco.com/shop/products/opw-11b-0100-leaded-prepay-nozzle-green|https://spatco.com//assets/products/images/11B-0100.jpg|in stock|90.91 USD|4.7 lb|OPW|Green|new|no| SDDE-SYS-10|SDDE-SYS-10|DEF Drum Enclosure with Internal Dispensing|Insulated enclsure with complete pumping system for 55 gallon DEF drums.|https://spatco.com/shop/products/def-drum-enclosure-with-internal-dispensing|https://spatco.com//assets/products/images/DEF_DrumEnclosure_economical_1.jpg|in stock|3495 USD|0 lb|Spatco||new|no| F20226000|F20226000|Piusi F20226000 Blue IBC Cap with 2-Inch Buttress|IBC Center Blue Cap with 2.5 x 5 Buttress thread type is for use with IBC Containers.|https://spatco.com/shop/products/blue-ibc-cap|https://spatco.com//assets/products/images/SDA-749-326.jpg|in stock|37.12 USD|1 lb|Piusi||new|no| SPP1-418|SPP1-418|SPATCO Mag Drive DEF Pump 1 HP|MAX 30 FT Head, 45 GPM. Has 1 HP|https://spatco.com/shop/products/spatco-mag-drive-def-pump-1-hp|https://spatco.com//assets/products/images/SPP1-418.jpg|in stock|1294 USD|50 lb|Spatco||new|no| SDP-200-050|SDP-200-050|Piusi SDP-200-050 Suzzara Blue OCIO Fluid Level Indicator|OCIO detects the static pressure generated by the fluid height by means of a tube inserted into the tank and displays the fluid level or volume. The system consists of: A tube for detecting static pressure: The tube end is inserted from the top of the tank and lowered down into the liquid until it touches the bottom. A control unit for displaying the level and managing the system. The unit is equipped with an intuitive, complete software and permits the connection of two alarm or lock devices. The software is used to: Set tank type and dimensionsDefine alarm levelsDefine indication levelDefine measurement unitCalibrate the instrument Depending on the set alarm levels, the control unit activates or deactivates the contact by acting as a remote switch for starting the alarms or cutting power to the connected equipment.|https://spatco.com/shop/products/suzzara-blue-ocio-fluid-level-indicator|https://spatco.com//assets/products/images/SDP-200-050.jpg|in stock|608.5 USD|4.8 lb|Piusi||new|no| SDP-200-016|SDP-200-016|Two Inch Double Threaded Polypropylene Bulkhead Fitting|This 2 inch double threaded black polypropylene bulkhead fitting requires a 3 inch hole size in DEF tank for installation.|https://spatco.com/shop/products/two-inch-dt-polypropylene-bulkhead-fitting|https://spatco.com//assets/products/images/SDP-200-016.jpg|in stock|10 USD|0.75 lb|Norwesco||new|no| SDP-200-015|SDP-200-015|One Inch Double Threaded Polypropylene Bulkhead Fitting|This 1 inch double threaded black polypropylene bulkhead fitting requires a 2-1/4 inch hole size in DEF tank for installation.|https://spatco.com/shop/products/one-inch-double-threaded-polypropylene-bulkhead-fitting|https://spatco.com//assets/products/images/SDP-200-015.jpg|in stock|18.63 USD|0.4 lb|Norwesco||new|no| SDP1-35|SDP1-35|SPATCO Mag Drive, Self Priming Poly Pump 1/2 HP|Seal-less, self-priming plastic mag-drive pump is ideal for 1-2 DEF dispensers.|https://spatco.com/shop/products/spatco-mag-drive-self-priming-poly-pump-1-2-hp|https://spatco.com//assets/products/images/SDP1-35.jpg|in stock|1170 USD|40 lb|Spatco||new|no| SDN-A-1|SDN-A-1|OPW 19DEF-0500 Stainless Steel Non-Magnetic Automatic Nozzle for DEF|OPWs Stainless Steel Non-Magnetic Automatic Nozzle is for diesel exhaust fluid dispensing.|https://spatco.com/shop/products/stainless-steel-nonmagnetic-automatic-nozzle|https://spatco.com//assets/products/images/SDN-A-1.jpg|in stock|182.24 USD|4 lb|OPW|Blue|new|no| SDMN-A-1|SDMN-A-1|Stainless Steel Magnetic Automatic Nozzle for DEF|Stainless steel automatic nozzle for DEF. OPW 19DEF series.|https://spatco.com/shop/products/stainless-steel-magnetic-automatic-nozzle|https://spatco.com//assets/products/images/SDN-A-1.jpg|in stock|180 USD|5 lb|Spatco|Blue|new|no| SDMDP-1|SDMDP-1|Piusi SDMDP-1 DEF 120V AC Poly Pump|This DEF pump is built with an electric motor, 6.5 minute auto-shutoff timer board and no need for a dynamic seal. Reliable industrial pump with self-priming capabilities.|https://spatco.com/shop/products/def-120v-ac-poly-pump|https://spatco.com//assets/products/images/SDMDP-1.jpg|in stock|334.09 USD|17 lb|Piusi||new|no| SDM-200-003|SDM-200-003|EPDM Gasket for 1 Inch BSP Fitting|EPDM Gasket for 1 Inch BSP Fitting is for DEF equipment.|https://spatco.com/shop/products/epdm-gasket-for-1-inch-bsp-fitting|https://spatco.com//assets/products/images/SDM-200-003.jpg|in stock|2.5 USD|0.1 lb|Spatco||new|no| SDM-200-002|SDM-200-002|Worm Gear Clamp; 1 to 1 1/4 inch|Interlocked hose clamp used to help secure hoses. |https://spatco.com/shop/products/worm-gear-clamp-1-to-11-4-inch|https://spatco.com//assets/products/images/SDM-200-002.jpg|in stock|4.02 USD|0.5 lb|Spatco||new|no| SDH-D-15|SDH-D-15|DEF Discharge Hose 3/4 inch x 15 feet NPT Male x Male Swivel|This 3/4 suction discharge hose is heavy duty for DEF applications, particularly truck delivery and tanks. Length is 15 feet.|https://spatco.com/shop/products/def-discharge-hose-3-4-inch-x-15-feet|https://spatco.com//assets/products/images/SDH-D-15.jpg|in stock|122 USD|4 lb|Flextral|Black|new|no| 743-097|743-097|Micro Matic 743-097 RSV Container Valve Four Pin, Two Inch Buttress Thread with EPDM Seal|Helps maintain diesel exhaust fluid purity from the manufacturer to the end-user. Compatible with 55 gallon drums and 275/330 gallon IBCs (Totes). |https://spatco.com/shop/products/rsv-container-valve-four-pin-two-inch-buttress-thread-with-epdm-seal|https://spatco.com//assets/products/images/SDA-743-097.jpg|in stock|68.18 USD|3 lb|MicroMatic||new|no| SDA-001-092|SDA-001-092|Polymer Adaptor, One Inch Female BSPP x 3/4 Inch Female NPT|This Husky model 010551 Polymer Adaptor is for use with Husky shut-off diesel exhaust fluid nozzles for full-service and self-service fueling stations.|https://spatco.com/shop/products/polymer-adaptor-one-inch-female-bspp-x-3-4-inch-female-npt|https://spatco.com//assets/products/images/SDA-001-092.jpg|in stock|40.77 USD|0.5 lb|Husky||new|no| SDA-001-087B1|SDA-001-087B1|DAB SDA-001-087B1 BD-900 DEF Submersible Pump, .83 HP, 115 Volt|This DEF submersible pump is a powerful multi-stage pump with 4 impellers. Nonmetallic, multistage design with built in thermal and current overload protection. Used especially for supplying DEF from totes and aboveground/above ground storage tanks|https://spatco.com/shop/products/def-submersible-pump-1hp-115-volt|https://spatco.com//assets/products/images/SDA-001-087B1.jpg|in stock|1535.5 USD|30 lb|DAB||new|no| SDA-001-087B|SDA-001-087B|DAB SDA-001-087B DEF Submersible Pump, 1/2HP, 115 Volt|This DEF submersible pump is a powerful multi-stage pump with 2 impellers. Typically used for supplying DEF from totes and aboveground/underground storage tanks. Nonmetallic, multistage design with built in thermal and current overload protection.|https://spatco.com/shop/products/def-submersible-pump-1-2hp-115-volt|https://spatco.com//assets/products/images/SDA-001-087B.jpg|in stock|804.62 USD|16.5 lb|DAB||new|no| SDA-001-052|SDA-001-052|DAB SDA-001-052 Controller for 200M HF Pump, 12 AMP, 230 Volt, 1 Phase|The 100 M Controller, 16 AMP, 115V / 1Ph, is for DABs Diver 100 Series 1HP pump.|https://spatco.com/shop/products/controller-for-200m-hf-pump-12-amp-230volt-1phase|https://spatco.com//assets/products/images/SDA-001-052.jpg|in stock|250 USD|3.4 lb|DAB||new|no| SC-FF-2D|SC-FF-2D|Pulse Scaler and Isolator with Relay Output, Din Rail Mount, and Open Collector|The model SC-FF is a DC powered frequency scaler and pulse isolator. Several input types are supported including magnetic pickup, contact closure, and an isolated pulse input. This unit is powered to 8 - 35 VDC. |https://spatco.com/shop/products/pulse-scaler-and-isolator-with-relay-ouput-din-rail-mount-and-open-collector|https://spatco.com//assets/products/images/SC-FF-2D.jpg|in stock|576.43 USD|2 lb|Kessler Ellis||new|no| RX750SS-230|RX750SS-230|Top Discharge 316 Cast Stainless Steel Submersible Pump 230 Volt 1HP|BJMs Bullet Series Top Discharge 316 Cast Stainless Steel Pumps pass liquid up and around the motor before discharging. This ensures better motor cooling in low level liquid applications.|https://spatco.com/shop/products/316-stainless-steel-submersible-pump-230-volt-1hp|https://spatco.com//assets/products/images/RX750SS-230.jpg|in stock|5590 USD|75 lb|BJM||new|no| RST5|RST5|316 Stainless Steel Hose Barb Adaptor, 3/4 NPT|The Dixon King Combination Nipple NPT Threaded Hose Fitting connects hose to an NPT male connection. This combination nipple has a barbed end to create a tight seal on a hose when used with a hose clamp or crimp sleeve. It is made of type 316 stainless steel for higher strength and greater corrosion resistance. |https://spatco.com/shop/products/316-stainless-steel-hose-barb-adaptor-3-4-npt|https://spatco.com//assets/products/images/RST5.jpg|in stock|24.32 USD|0.5 lb|Dixon||new|no| PHC-2SSNIP-NPT|PHC-2SSNIP-NPT|Two Inch 303 Stainless Steel Male Drybreak Adapter with Two Inch Male NPT|Dry break couplings connect with minimal air inclusion and disconnect with minimal spillage, in some cases leaving just wet surfaces. |https://spatco.com/shop/products/two-inch-303-stainless-steel-male-drybreak-adapter-with-two-inch-male-npt|https://spatco.com//assets/products/images/PHC-2SSNIP-NPT-1.jpg|in stock|295 USD|1.5 lb|Parker||new|no| MFPD|MFPD|OPW MFPD DEF Mis-filling Prevention Device|DEF mis-filling can be expensive! The OPW 21Gu MFPD offers the industry’s most effective and affordable insurance policy against mis-filling mishaps; actually stopping them before they happen. There is no better way to protect your investment and the environment. Works with DEF Blue Magnetic Nozzle (21GU-0500). Nozzle sold separately. Using the MFPD, put the nozzle in the diesel tank? No problem! The nozzle will not flow. |https://spatco.com/shop/products/def-misfilling-prevention-device|https://spatco.com//assets/products/images/MFPD.jpg|in stock|48.42 USD|1 lb|OPW||new|no| FGT101|FGT101|Dispenser Heater Thermostat|This easy-to-use thermostat is ideal for enclosure climate control of cooling fans or enclosure heaters. It measures ambient temperature around the housing of the thermostat, then cycles the output to regulate that temperature. This low cost bi-metal thermostat is prefect for your enclosure climate control requirement.|https://spatco.com/shop/products/dispenser-heater-thermostat|https://spatco.com//assets/products/images/FGT101.jpg|in stock|33.68 USD|2 lb|DBK||new|no| FGC3001|FGC3001|Dispenser Heater, 115V 60Hz|The Cirrus range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a “fan-only” mode for air circulation. |https://spatco.com/shop/products/dispenser-heater-115v-60hz|https://spatco.com//assets/products/images/FGC3001.jpg|in stock|215.82 USD|1 lb|DBK||new|no| 201|201|RSV Dispense Coupler, 3/4 Inch Barbed with Viton Seal|RSV (Reusable Stainless Valve) 4 Pin Dispense Coupler with horizontal 3/4 barbed outlet is the only on-site refilling - closed, sealed and secure proprietary keyed system for the diesel exhaust fluid (DEF) market.|https://spatco.com/shop/products/rsv-dispense-coupler-3-4-inch-barbed-with-viton-seal|https://spatco.com//assets/products/images/SDA-744-048.jpg|in stock|233 USD|2.5 lb|MicroMatic||new|no| 235203|235203|Gem Sensors 235203 LS700 High Level Switch for DEF Tank, Two Inch NPT Mounting|These compact units feature the rugged durability of stainless steel or brass construction in a lightweight package. Ideal for tanks less than 4 feet. LS-700 Series switches are exceptionally versatile.|https://spatco.com/shop/products/ls700-high-level-switch-for-def-tank-two-inch-npt-mounting|https://spatco.com//assets/products/images/235203.jpg|in stock|499.32 USD|6.3 lb|Gem Sensors||new|no| 21GU-SSB|21GU-SSB|OPW DEF Stainless Steel Reconnectable Breakaway/Swivel, 1 inch BSPP male thread|Ensures a smooth nozzle rotation for easy customer handling and reduced hose wear. Features premium seals and all stainless steel construction to provide long-life durability and protection against DEF contamination. Reconnectable.|https://spatco.com/shop/products/def-stainless-steel-reconnectable-breakaway-swivel-1-inch-bspp-male-thread|https://spatco.com//assets/products/images/21GU-SSB.jpg|in stock|230.24 USD|2.5 lb|OPW||new|no| 21GU-050G|21GU-050G|DEF Blue Magnetic Nozzle designed for Gilbarco and Gasboy Model 9862KXZ|End-to-end dispensing hardware solution for reliable, efficient DEF-filling. Designed for use without Mis-Filling Prevention Device.|https://spatco.com/shop/products/def-blue-magnetic-nozzle-designed-for-gilbarco-and-gasboy-model-9862kxz|https://spatco.com//assets/products/images/21GU-050G.jpg|in stock|311.76 USD|5 lb|OPW|Blue|new|no| 21GU-0500|21GU-0500|DEF Blue Magnetic Nozzle designed for Wayne, Gasboy (Model 9862XXZWW), and Bennett|The industrys most comprehensive DEF-filling solution! This DEF nozzle works with the mis-filling prevention device (MFPD) to provide unique unparalleled filling assurance and peace of mind. MFPD sold separately.|https://spatco.com/shop/products/def-blue-magnetic-nozzle-designed-for-wayne-gasboy-model-9862xxzww-and-bennett|https://spatco.com//assets/products/images/21GU-0500.jpg|in stock|302.68 USD|5 lb|OPW|Blue|new|no| 21GU-040G|21GU-040G|DEF Black Non-Magnetic Nozzle designed for Gilbarco and Gasboy Model 9862KXZ|End-to-end dispensing hardware solution for reliable, efficient DEF-filling. Designed for use without Mis-Filling Prevention Device.|https://spatco.com/shop/products/def-black-nonmagnetic-nozzle-designed-for-gilbarco-and-gasboy-model-9862kxz|https://spatco.com//assets/products/images/21GU-040G.jpg|in stock|290.42 USD|2.5 lb|OPW|Black|new|no| 21GU-0400|21GU-0400|OPW 21GU-0400 DEF Black, Non-Magnetic Nozzle designed for Wayne, Gasboy (Model 9862XXZWW), and Bennett|End-to-end dispensing hardware solution for reliable, efficient DEF-filling. Designed for use without Mis-Filling Prevention Device.|https://spatco.com/shop/products/def-black-nonmagnetic-nozzle-designed-for-wayne-gasboy-model-9862xxzww-and-bennett|https://spatco.com//assets/products/images/21GU-0400.jpg|in stock|290.42 USD|2.5 lb|OPW|Black|new|no| 1672AN-SS20|1672AN-SS20|OPW 1672AN-SS20 Two Inch Stainless Steel Kamvalok Adaptor with Viton Seal|The 1600AN Series Adaptor is specifically designed to mate with OPW Kamvalok® Couplings to help prevent liquid spillage during the connection/disconnection process. The adaptor contains a spring-loaded poppet to assure fast closing and a tight seal.|https://spatco.com/shop/products/two-inch-stainless-steel-kamvalok-adaptor-with-viton-seal|https://spatco.com//assets/products/images/1672AN-SS20.jpg|in stock|714.4 USD|4 lb|OPW||new|no| 13MHHM100-150|13MHHM100-150|Heavy Duty 1 - 1-1/2 Single Pin Clamp w/ Cross Hole Wing Nut|This 304 stainless steel single pin heavy duty clamp with cross hole wing nut has a pressure rating of 500 PSI at 70°F and 300 PSI at 250°F.|https://spatco.com/shop/products/heavy-duty-single-pin-clamp-304-stainless-steel-with-500-psi-at-70-deg-f-pressure-rating|https://spatco.com//assets/products/images/13MHHM100-150.jpg|in stock|13.5 USD|0.64 lb|Dixon||new|no| 7005.015|7005.015|1.50 Inch Poly Tank Fitting/Adapter MPT x FPT|BFA Series bulkhead fittings offer a longer shaft for thicker tank walls and easy one person installation. Gasket is EPDM.|https://spatco.com/shop/products/1-50-inch-poly-tank-fitting-adapter-mpt-x-fpt|https://spatco.com//assets/products/images/7005.015.jpg|in stock|21.06 USD|1.5 lb|Hayward||new|no| 7004.040|7004.040|Four Inch Poly Tank Fitting/Adapter MPT x FPT|BFA Series bulkhead fittings offer a longer shaft for thicker tank walls and easy one-person installation. Gasket is EPDM.|https://spatco.com/shop/products/four-inch-poly-tank-fitting-adapter-mpt-x-fpt|https://spatco.com//assets/products/images/7004.040.jpg|in stock|184.37 USD|4.5 lb|Hayward||new|no| TEST-123ABC|TEST-123ABC|0 ABC Test Product|Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem aperiam, eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernatur aut odit aut fugit, sed quia consequuntur magni dolores eos qui ratione voluptatem sequi nesciunt.|https://spatco.com/shop/products/abc|https://spatco.com//assets/products/images/0087.jpg|in stock|0.1 USD|10 lb|Gasoila Chemicals|Gold|new|no| STP-MLD-G|STP-MLD-G|FE Petro Mechanical Leak Detector For Gasoline (STP-MLD-G)|FE Petro™ brand MLD+ mechanical leak detectors provide precise leak detection for standard fuel and biofuel applications on 4 submersible turbine pumps (STPs). This lineup of advanced mechanical leak detectors features reliable line leak detection capabilities and maximum product flow rates. The MLD+ features a compact, yet rugged design to reduce installation height and provide accurate, hassle-free operation. |https://spatco.com/shop/products/fe-petro-mechanical-leak-detector-for-gas-single-pack-1|https://spatco.com//assets/products/images/STP-MLD-D.jpg|in stock|537.14 USD|12 lb|FE Petro||new|no| SPC-100-CASE|SPC-100-CASE|Oil Absorbent Mat 15 inch x 18 inch with 22 Gal/Absorption - Pack of 200|These pads absorb oils, fuels and petroleum-based products. Not only are they highly absorbent for small spills and catching drips, they also repel water. Save on purchasing in pack of 200.|https://spatco.com/shop/products/oil-absorbent-mat-15-inch-x-18-inch-with-22-gal-sorption-1|https://spatco.com//assets/products/images/SPC-100-1.jpg|in stock|132 USD|0.2 lb|Gehring||new|no| SARGEL-CASE|SARGEL-CASE|SAR-GEL Blue 1oz. CMR-Free Water Finding Paste - Case of 12|SAVE 5% per unit by buying in case quantities! Water contamination in fuel tanks can ruin valuable product, causing loss of inventory and profit. Sartomer developed SAR-GEL® BLUE water finding paste for quick and reliable detection of water in the bottom of tanks containing gasoline, E10 gasoline, diesel, jet fuel, fuel oil, biodiesel, light crude oil, solvents and other materials incompatible with water. SAR-GEL® BLUE is carcinogenic, mutagenic, reprotoxic (CMR) substances-free and easy to use.|https://spatco.com/shop/products/sargel-water-finding-paste-case-of-12|https://spatco.com//assets/products/images/sargel-blue.png|in stock|85.56 USD|3 lb|Arkema ||new|no| N816-19-20-10.5JTR|N816-19-20-10.5JTR|Hannay Reel N816-19-20-10.5JTR Spring Rewind Carbon Steel Hose Reel with Stainless Steel Wetted Parts|Reel has 1 NPT Inlet size and 3/4 NPT Outlet to handle up to 25 of hose. Used for DEF, fuel dispensing, waste oil evacuation, air and water.|https://spatco.com/shop/products/spring-rewind-carbon-steel-hose-reel-with-stainless-steel-wetted-parts|https://spatco.com//assets/products/images/N816-19-20-10.5JTR.jpg|in stock|1190 USD|75 lb|Hannay Reel||new|no| DR012S|DR012S|Battery for S7RRDR2 Gear Meter|Battery is for the #S7RRDR2 SPATCO DEF Gear Flow Meter.|https://spatco.com/shop/products/battery-for-s7rrdr2-gear-meter|https://spatco.com//assets/products/images/DR012S.jpg|in stock|31.5 USD|1 lb|Spatco||new|no| 40MP-E100|40MP-E100|One Inch EPDM Clamp Gasket|One Inch EPDM Clamp Gasket is a standard sanitary clamp gasket.|https://spatco.com/shop/products/one-inch-epdm-clamp-gasket|https://spatco.com//assets/products/images/40MP-E100.jpg|in stock|2.1 USD|0.1 lb|Dixon|Black|new|no| UMP75U1|UMP75U1|Red Jacket 3/4 HP Replacement Motor|Product Details: 3/4HP, .56 KW, 208/230 voltage, single phase|https://spatco.com/shop/products/red-jacket-3-4-hp-replacement-motor|https://spatco.com//assets/products/images/UMP75U1.jpg|in stock|904.01 USD|50 lb|Red Jacket||new|no| 880-047-1|880-047-1|Red Jacket 880-047-1 Isotrol Control Box with Relay 1-8R / 120 Volt|The Red Jacket Isotrol 1-8 Control Box is the most versatile dispenser handle signal isolation system available. It isolates handle signals between each dispenser and protects against wiring shorts and phasing issues. Plus it keeps technicians working on site safe from dangerous feedback. The Isotrol 1-8 Control Box is available with or without a built-in relay. May be used with Red Jacket’s Submersible Turbine Pump, Big Flo Pump or IQ Control Box, or as a “stand alone” with onboard 30-amp power relay.|https://spatco.com/shop/products/red-jacket-isotrol-control-box-with-relay-1-8r-120-volt|https://spatco.com//assets/products/images/880-047-1.jpg|in stock|611.13 USD|3.1 lb|Red Jacket||new|no| PICO-500|PICO-500|Eaton Uninterruptible Power Supply|Uninterruptible Power Supplies (UPS) provide battery backup power in the absence of AC power for POS systems. In the event of a power outage, the UPS allows the Point of Sale (POS) terminals to complete all in-process transactions and perform an unattended, orderly shutdown. The UPS also eliminates the instantaneous power interruptions that can cause erratic operation in a POS terminal. AC 120 V, 350 Watt, 500 VA, RS-232, USB, 4 output connector(s).|https://spatco.com/shop/products/eaton-uninterruptible-power-supply-for-point-of-sale-and-network-equipment|https://spatco.com//assets/products/images/PICO-500.jpg|in stock|329.54 USD|33.51 lb|Eaton|Black|new|no| SMART500RT1U|SMART500RT1U|Tripp Lite SMART500RT1U SmartPro 120V 500VA 300W Line-Interactive UPS|Tripp Lites SMART500RT1U intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Package Includes: SMART500RT1U UPS SystemRackmount installation hardwareUSB, DB9 and EPO cablingInstruction manual|https://spatco.com/shop/products/smartpro-120v-500va-300w-line-interactive-ups|https://spatco.com//assets/products/images/SMART500RT1U.jpg|in stock|266.5 USD|18 lb|Tripp Lite||new|no| MK3780-31A62|MK3780-31A62|Honeywell MK3780 Fusion 3780 Omni-directional Laser Scanner for Verifone Ruby POS|The MS3780 Fusion has a primary 20-line omnidirectional scan pattern that allows for aggressive scanning of barcodes in any orientation or with a push of a button can switch to a targeted single line for menu scanning. This feature of the MS3780 Fusion provides the ability to pass over other barcodes, selecting only the required code. No other scanner offers this much control. Hands free operation in the stand for presentation scanning reduces operator fatigue and multiple sleep modes reduce power consumption. Includes Verifone Ruby cable kit and stand. |https://spatco.com/shop/products/honeywell-mk3780-fusion-3780-omni-directional-laser-scanner-for-verifone-ruby-pos|https://spatco.com//assets/products/images/MK3780-31A62.jpg|in stock|483.72 USD|1.7 lb|Honeywell|Black|new|no| 100-708|100-708|Jomar 2 inch Full Port Brass Ball Valve with Threaded Connections|This two-piece, full port brass ball valve with threaded connections features blow-out proof stem, triple sealing stem with two Viton® o-rings and Teflon® seal.|https://spatco.com/shop/products/jomar-2-inch-full-port-brass-ball-valve-with-threaded-connections|https://spatco.com//assets/products/images/100-708.jpg|in stock|89.2 USD|4.85 lb|Jomar Valve||new|no| P158-100-04R|P158-100-04R|Verifone Rebuilt V950 Console for Sapphire system|The V950 hardware system is a rugged solution that works with Sapphire to provide complete backup to ensure your sites are up and running. This item is refurbished. ***SPECIAL CLOSEOUT PRICING WHILE SUPPLIES LAST***|https://spatco.com/shop/products/verifone-rebuilt-v950-console-for-sapphire-system|https://spatco.com//assets/products/images/P158-100-04R.jpg|in stock|50.01 USD|14 lb|Verifone||new|no| P050-02-310-R|P050-02-310-R|Verifone P050-02-310-R Topaz XL II Touch Screen Workstation|Refund of $718.50 with return of core.|https://spatco.com/shop/products/verifone-topaz-xl-ii-touch-screen-workstation|https://spatco.com//assets/products/images/P050-02-310-R.jpg|in stock|1715 USD|25 lb|Verifone||new|no| P050-01-200R|P050-01-200R|Verifone Rebuilt Topaz Cash Drawer|Cash drawer is re-manufactured. Optional core exchange. Refund of $292.31 with return of core.|https://spatco.com/shop/products/verifone-rebuilt-topaz-cash-drawer|https://spatco.com//assets/products/images/P050-01-200R.jpg|in stock|508.56 USD|19 lb|Verifone||new|no| P040-07-050|P040-07-050|VeriFone P040-07-050 UPS Battery Backup|Battery backup for the Verifone Ruby and Topaz retail point of sale systems. Note: Warranted by manufacturer for one year from date of purchase. See Returns and Refunds page for more information on warranty returns. |https://spatco.com/shop/products/verifone-ups-battery-backup|https://spatco.com//assets/products/images/P040-07-050.jpg|in stock|417.86 USD|32 lb|Verifone||new|no| P040-02-020R|P040-02-020R|Verifone Rebuilt Thermal Printer for Sapphire/Topaz/Ruby System|Rebuilt compact thermal receipt printer takes minimal counter space. Refund of $225.00 with return of core.|https://spatco.com/shop/products/verifoen-rebuilt-rp-300-310-thermal-printer-for-sapphire-topaz-ruby-system|https://spatco.com//assets/products/images/P040-02-020R.jpg|in stock|560.67 USD|4.65 lb|Verifone||new|no| P040-02-006|P040-02-006|Verifone P040-02-006 EpsonTM-U950 Printer for Ruby system|This versatile and reliable impact printer is ideal for receipts, journals and slips in most retail environments and is capable of driving two cash drawers. The TM-U950 is designed to handle jobs which need maximum information in the minimum time and can print slips with up to four copies, and also offers ultra-fast output of up to 88 columns on A4 paper. It is simple to use and maintain with easy paper loading, auto-cutter, plus security features such as paper-low detectors. This model is refurbished and compatible with the Verifone Ruby system. ***SPECIAL CLOSEOUT PRICING WHILE SUPPLIES LAST***|https://spatco.com/shop/products/verifone-rebuilt-epsontm-u950-printer-for-ruby-system|https://spatco.com//assets/products/images/P040-02-006.jpg|in stock|323.75 USD|13.8 lb|Verifone||new|no| P039-500-01R |P039-500-01R |Verifone P039-500-01 V920 Viper - Rebuilt|With Verifones VIPER payment server, youll have a dedicated system for your payment processes thats a lower cost alternative to a separate EPS device. Not only will it give you the ability to standardize payment applications across your organization, but youll also have a centralized, reliable and scalable method of transitioning to new payment technologies as they continue to evolve. This system is rebuilt model #P039-500-01R. ***SPECIAL CLOSEOUT PRICING WHILE SUPPLIES LAST***|https://spatco.com/shop/products/verifone-rebuilt-v920-viper|https://spatco.com//assets/products/images/P039-500-01R.jpg|in stock|1782.05 USD|9 lb|Verifone||new|no| P039-100-03R|P039-100-03R|Verifone P039-100-03 Rebuilt Sapphire III Console|Rebuilt console/point of sale system for retail. ***SPECIAL CLOSEOUT PRICING WHILE SUPPLIES LAST*** NO CORE REQUIRED|https://spatco.com/shop/products/verifone-rebuilt-sapphire-iii-console|https://spatco.com//assets/products/images/P039-100-03R.jpg|in stock|100.01 USD|18 lb|Verifone||new|no| MET132-019-01-A|MET132-019-01-A|Verifone MX915 PCI 9.9 Compliant Stand for Pin Pad|Bring the Verifone MX 900 series pin pads closer to your customers and enhance their checkout experience with this stand made of black composite plastic. Securely and invisibly holds your pin pad terminal in place. (Terminal not included). |https://spatco.com/shop/products/verifone-mx915-pci-9-9-compliant-stand-for-pin-pad|https://spatco.com//assets/products/images/MET132-019-01-A_2.jpg|in stock|144.29 USD|4 lb|Verifone||new|no| M13240901-EXX04|M13240901-EXX04|Verifone Model MX915 EMV-Ready Pin Pad with Exxon EXX04 software injection|Verifone’s MX 900 series delivers a rich media experience with a brilliant color display, powerful processor and generous memory. Requires key injection in order to accept debit or credit card payments. Not compatible with Gilbarco Passport.|https://spatco.com/shop/products/verifone-model-mx915-emv-ready-pin-pad-with-exxon-exx04-software-injection|https://spatco.com//assets/products/images/M132-409-01R.jpg|in stock|1128.57 USD|6 lb|Verifone||new|no| CPS124130-3A-R|CPS124130-3A-R|Verifone Topaz Power Supply|Refurbished power supply for the Verifone Topaz POS has 100-240VAC,130 Watts, 24V/5.4A. Refund of $116.35 with return of core.|https://spatco.com/shop/products/verifone-topaz-power-supply-100-240vac-130w-24v-5-4a|https://spatco.com//assets/products/images/CPS124130-3A-R.jpg|in stock|275.43 USD|13 lb|Verifone||new|no| 55270-02|55270-02|Verifone Ruby Rebuilt 120-Key Keyboard|Repaired rebuilt to original manufacture standards, this 120-key keyboard fits the Verifone Ruby POS.|https://spatco.com/shop/products/verifone-ruby-rebuilt-120-key-keyboard|https://spatco.com//assets/products/images/55270-02.jpg|in stock|289.8 USD|1.4 lb|Verifone||new|no| 28757-02-R|28757-02-R|Verifone Cable for MX800 Series Pin Pad|Cable for the Verifone MX800 series pin pad, replaces model 55571-02-R.|https://spatco.com/shop/products/verifone-cable-for-mx800-series-pin-pad|https://spatco.com//assets/products/images/28757-02-R.jpg|in stock|57.87 USD|0.05 lb|Verifone||new|no| 24377-02-R|24377-02-R|Verifone Sapphire III Memory Module, 512MB|Verifones 24377-02-R is a 512 MB memory module for the Sapphire III POS.|https://spatco.com/shop/products/verifone-sapphire-iii-memory-module-512mb|https://spatco.com//assets/products/images/24377-02-R.jpg|in stock|273.69 USD|0.05 lb|Verifone||new|no| 03641-01|03641-01|Verifone Ruby Rebuilt External Power Supply|This rebuilt unit is 16 / 24 MHZ and is an external power supply for the Verifone Ruby POS.|https://spatco.com/shop/products/verifone-ruby-rebuilt-external-power-supply-16-24-mhz|https://spatco.com//assets/products/images/03641-01.jpg|in stock|93.97 USD|2.9 lb|Verifone||new|no| FSMS180200|FSMS180200|Hose Master Fire Shield Flex Connector 2 inch Male Swivel x 2 inch Male x 18 inches long|Fire-Shield connectors meet all specifications for aboveground and underground piping applications, and comply with NFPA and UFC codes.|https://spatco.com/shop/products/hose-master-fire-shield-flex-connector-2-inch-male-swivel-x-2-inch-male-x-18-inches-long|https://spatco.com//assets/products/images/FSMS180200.jpg|in stock|246.19 USD|4.01 lb|Hose Master||new|no| FSMS150150|FSMS150150|Hose Master Fire Shield Flex Connector 1-1/2 inch Male Swivel x 1-1/2 inch Male x 15 inches long|Fire-Shield connectors meet all specifications for aboveground and underground piping applications, and comply with NFPA and UFC codes.|https://spatco.com/shop/products/hose-master-fire-shield-flex-connector-1-1-2-inch-male-swivel-x-1-1-2-inch-male-x-15-inches-long|https://spatco.com//assets/products/images/FSMS150150.jpg|in stock|202.61 USD|7 lb|Hose Master||new|no| FSMM180150|FSMM180150|Hose Master Fire Shield Flex Connector 1-1/2 inch Male x 1-1/2 inch Male x 18 inches long|Fire-Shield connectors meet all specifications for aboveground and underground piping applications, and comply with NFPA and UFC codes.|https://spatco.com/shop/products/hose-master-fire-shield-flex-connector-1-1-2-inch-male-x-1-1-2-inch-male-x-18-inches-long|https://spatco.com//assets/products/images/FSMM180150.jpg|in stock|117.97 USD|3.45 lb|Hose Master||new|no| 6170-2|6170-2|RW Beckett Corp. 6170-2 Mushroom Vent Cap 2 inch FPT with Screen - Model OEM4025|Cast iron galvanized threaded cap with 30 mesh screen. Protects against driving rain, snow, sleet and insects.|https://spatco.com/shop/products/mushroom-vent-cap-2-inch-fpt-with-screen-model-oem4025|https://spatco.com//assets/products/images/6170-2.jpg|in stock|24.53 USD|2 lb|RW Beckett Corp||new|no| VFC-CONTROLLER-MAG|VFC-CONTROLLER-MAG|FE Petro Variable Frequency Controller (VS 2 HP and VS 4 HP)|Driven by a variable frequency controller, variable speed STPs allow higher, consistent flow rates by increasing the flow of fuel as more nozzles dispense fuel. Achieve maximum fuel throughput and reduce hydraulic hammer.|https://spatco.com/shop/products/fe-petro-variable-frequency-controller-vs-2-hp-and-vs-4-hp|https://spatco.com//assets/products/images/VFC-CONTROLLER-MAG.jpg|in stock|1610 USD|15.95 lb|FE Petro||new|no| STP-SCIII|STP-SCIII|FE Petro Three Phase Smart Controller - 3 HP and 5 HP|STP-SCIIIC is designed to replace three-phase motor starters in both new and existing locations. The STP-SCIIIC controller provides valuable pump protection and performance features for an economical price. It constantly monitors for abnormal conditions that reduce motor life or cause down-time. When any of these conditions exists, the STP-SCIII will alert the service technician to the source of the problem: dry run, extended run, overvoltage, undervoltage, relay fault, voltage/current unbalance, locked rotor, phase loss or open circuit. Provides “on demand” automatic pump start of up to eight submersible pumps manifolded to the same discharge line. Lead pump starts to satisfy initial demand and additional pumps are started as demand increases, reducing power consumption and extending pump life.|https://spatco.com/shop/products/fe-petro-three-phase-smart-controller-3-hp-and-5-hp|https://spatco.com//assets/products/images/STP-SCIII.jpg|in stock|1343 USD|7.2 lb|FE Petro||new|no| STP-MLD-D|STP-MLD-D|FE Petro Mechanical Leak Detector For Diesel|For use with 4 STPs, the MLD product line is precision built, with unique construction features that provide busy stations with maximum flow rates and long service life. The MLD is offered in three models to match your exact application, ensuring accurate, nuisance-free operation critical to profitable station operation.|https://spatco.com/shop/products/fe-petro-mechanical-leak-detector-for-diesel-single-pack|https://spatco.com//assets/products/images/STP-MLD-D.jpg|in stock|537.14 USD|10 lb|FE Petro||new|no| STP-DHI|STP-DHI|FE Petro DHI Dispenser Hook Isolation Box for 110 Volt dispenser handle switch|The FE Petro dispenser hook isolation device prevents electrical feedback between dispenser hook circuits as required by most electrical codes.|https://spatco.com/shop/products/fe-petro-dhi-dispenser-hook-isolation-box-for-110-volt-dispenser-handle-switch|https://spatco.com//assets/products/images/STP-DHI.jpg|in stock|569 USD|2.6 lb|FE Petro||new|no| PMA-VS2|PMA-VS2|FE Petro 2 HP Variable Speed Pump Motor Assembly|Kit with A/G compatible 2 Hp variable speed non-MagShell™ is 190 Volt and 20 inches in length. With variable speed conversion kits you can achieve higher, consistent flow rates, in turn boosting your profits, while eliminating the wear and tear hydraulic hammer can cause. Installation is easy with a variable speed pump motor assembly, MagVFC™ variable frequency controller and fourwire contractor’s plug. All-in-one variable speed kits are compatible with both FE Petro™ brand 4 submersible turbine pumps, as well as other competitive systems. The MagVFC™ works with the existing system to increase flow as more fueling points go live, delivering the flow you need as you need it. Your customers will know the difference between sites that provide steady flow and faster fueling during peak business hours and those sites that don’t.|https://spatco.com/shop/products/fe-petro-2-hp-variable-speed-pump-motor-assembly-190-volt-20-inch-length|https://spatco.com//assets/products/images/PMA-VS2.jpg|in stock|1431 USD|36 lb|FE Petro||new|no| PMAAGVS2|PMAAGVS2|FE Petro Variable Speed 2 HP Pump Motor Assembly with A/G option for Biofuels|Kit with AG compatible 2 HP variable speed non-MagShell™. With variable speed conversion kits you can achieve higher, consistent flow rates, in turn boosting your profits, while eliminating the wear and tear hydraulic hammer can cause. Installation is easy with a variable speed pump motor assembly, MagVFC™ variable frequency controller and fourwire contractor’s plug. All-in-one variable speed kits are compatible with both FE Petro™ brand 4 submersible turbine pumps, as well as other competitive systems. The MagVFC™ works with the existing system to increase flow as more fueling points go live, delivering the flow you need as you need it. Your customers will know the difference between sites that provide steady flow and faster fueling during peak business hours and those sites that don’t.|https://spatco.com/shop/products/fe-petro-variable-speed-2-hp-pump-motor-assy-ag-optioned-for-biofuels|https://spatco.com//assets/products/images/PMA-AGVS2.jpg|in stock|1533.23 USD|32 lb|FE Petro||new|no| PMA-3RJ|PMA-3RJ|FE Petro 3HP Pump Motor Assembly for 6 inch High Capacity Submersible Turbine Pump|Motor assembly is 3 horsepower, 208/230 Volt. Replaces competitive model UMP300J4-2HB.|https://spatco.com/shop/products/fe-petro-3-hp-pump-motor-assembly-208-230-v-for-6-inch-high-capacity-submersible-turbine-pump|https://spatco.com//assets/products/images/PMA-3RJ.jpg|in stock|5385 USD|110 lb|FE Petro||new|no| PMA-33|PMA-33|FE Petro 1/3 HP Pump Motor Assembly - 16 Inch Length|For use with 4 STPs, the MLD product line is precision built, with unique construction features that provide busy stations with maximum flow rates and long service life. The MLD is offered in three models to match your exact application, ensuring accurate, nuisance-free operation critical to profitable station operation.|https://spatco.com/shop/products/fe-petro-1-3-hp-pump-motor-assembly-16-inch-length|https://spatco.com//assets/products/images/PMA-33.jpg|in stock|1112 USD|24 lb|FE Petro||new|no| PMA-200|PMA-200|FE Petro 2 HP Replacement Pump Motor Assembly - Length 23-3/4 Inch|For use with 4 STPs, the MLD product line is precision built, with unique construction features that provide busy stations with maximum flow rates and long service life. The MLD is offered in three models to match your exact application, ensuring accurate, nuisance-free operation critical to profitable station operation.|https://spatco.com/shop/products/fe-petro-2-hp-replacement-pump-motor-assembly-length-23-3-4-inch|https://spatco.com//assets/products/images/PMA-200.jpg|in stock|1467 USD|50 lb|FE Petro||new|no| 400988932|400988932|FE Petro Model R Check Valve|The check valve holds and maintains pipeline pressure when the STP is off. It allows product flow when the STP is on. Integral to each check valve is a pressure relief valve. When the line pressure exceeds the pressure relief threshold it opens and bleeds pressure into the tank. For use with Veeder-Root PLLD.|https://spatco.com/shop/products/fe-petro-model-r-check-valve|https://spatco.com//assets/products/images/400988932.jpg|in stock|223 USD|0.5 lb|FE Petro||new|no| 400988931|400988931|FE Petro Standard Check Valve Replacement|The check valve holds and maintains pipeline pressure when the STP is off. It allows product flow when the STP is on. Integral to each check valve is a pressure relief valve. When the line pressure exceeds the pressure relief threshold it opens and bleeds pressure into the tank. For use with Mechanical Leak Detectors, Incon, Emco Wheaton electronic line leak detection.|https://spatco.com/shop/products/fe-petro-standard-check-valve-replacement|https://spatco.com//assets/products/images/400988931.jpg|in stock|223 USD|2 lb|FE Petro||new|no| 400562901|400562901|FE Petro Replacement Syphon Jet Assembly|FE Petros Syphon Jet allows for active air elimination, therefore it is automatic and not dependent on manual service by a technician. Operation: 1. Air enters Syphon cavity2. Air passes through Syphon Jet3. Air returns to tank4. With pump off, 1-way check valve prevents air from returning to manifold|https://spatco.com/shop/products/fe-petro-replacement-syphon-jet-assembly|https://spatco.com//assets/products/images/400562901.jpg|in stock|28.86 USD|2 lb|FE Petro||new|no| 400333343|400333343|FE Petro O-Ring (A/G compatible) for discharge manifold assembly|FE Petro O-Ring is A/G compatible. For discharge manifold assembly.|https://spatco.com/shop/products/fe-petro-o-ring-a-g-compatible-for-discharge-manifold-assembly|https://spatco.com//assets/products/images/400333343.jpg|in stock|67.71 USD|1 lb|FE Petro||new|no| 400200930|400200930|FE Petro Wire Connector Kit|This kit is for use on FE Petros 4 pumps. Includes male/female connectors: two #10, one #5, and #18.|https://spatco.com/shop/products/fe-petro-wire-connector-kit|https://spatco.com//assets/products/images/400200930.jpg|in stock|271.16 USD|4 lb|FE Petro||new|no| 400137937|400137937|FE Petro Replacement Syphon Check Valve|Valve is A/G compatible. For use with multiple fuel types.|https://spatco.com/shop/products/fe-petro-replacement-syphon-check-valve|https://spatco.com//assets/products/images/400137937.jpg|in stock|106 USD|0.35 lb|FE Petro||new|no| CTM-75|CTM-75|CAM Twist Magnetic Breakaway - 3/4 Inch NPT|The CAM TWIST is designed to be installed between the fuel dispenser and the nozzle. The unique design seals the internal components before separation is complete, thus reducing any exposure to product and any environmental impact. There is no other breakaway that gives you the option to easily disconnect, inspect and reconnect while installed. With a twist, the breakaway can be taken apart and inspected for damage, corrosion and wear without removing the breakaway from service. |https://spatco.com/shop/products/cam-twist-magnetic-breakaway-3-4-inch-npt|https://spatco.com//assets/products/images/CTM75.jpg|in stock|89 USD|1.55 lb|Catlow||new|no| TD-1993|TD-1993|Fuel Oil Truck Decal|This UN 1993 decal for combustible liquid is diamond shaped with a red background. Meets DOT marking specifications.|https://spatco.com/shop/products/fuel-oil-truck-decal|https://spatco.com//assets/products/images/TD-1993.jpg|in stock|7.45 USD|0.25 lb|Performance Ink||new|no| TD-1203|TD-1203|Truck Placard - Gasoline|Placard meets CFR 49 and are capable of withstanding, without deterioration 30 day exposure to open weather conditions.|https://spatco.com/shop/products/truck-placcard-gasoline|https://spatco.com//assets/products/images/TD-1203.jpg|in stock|6.12 USD|0.25 lb|Performance Ink||new|no| PID-API-ULS|PID-API-ULS|Ultra-Low Sulfur Highway Diesel Fuel (15 ppm Sulfur Max) Decal|White and green decal reads, ULTRA-LOW SULFER HIGHWAY DIESEL FUEL (15 ppm Sulfur Maximum). REQUIRED for use in all highway diesel vehicles and engines. Recommended for use in all diesel vehicles and engines. Dimensions: 4 x 4.|https://spatco.com/shop/products/ultra-low-sulfer-hwy-15ppm-decal|https://spatco.com//assets/products/images/PID-API-ULS.jpg|in stock|7.35 USD|0.25 lb|Performance Ink||new|no| PD-169-12|PD-169-12|Flammable Decal with Red letters on White background 12 inch x 3 inch|The FLAMMABLE Decal stands out with red lettering on a white background.|https://spatco.com/shop/products/flammable-decal-with-red-letters-on-white-background-12-inch-x-3-inch|https://spatco.com//assets/products/images/PD-169-12.jpg|in stock|4.9 USD|0.01 lb|Performance Ink|Red on White|new|no| PD-168-12|PD-168-12|No Smoking Decal with Red letters on White background 12 Inch|White with red lettering NO SMOKING sticker stands out, exactly what you need at your fueling site.|https://spatco.com/shop/products/no-smoking-decal-with-red-letters-on-white-background-12-inch|https://spatco.com//assets/products/images/PD-168-12.jpg|in stock|4.45 USD|0.25 lb|Performance Ink|Red on White|new|no| PD-105-12|PD-105-12|Decal Diesel Red on White 12 inch x 3 inch|12 wide x 3 tall sticker clearly marks diesel fuel. White with red lettering.|https://spatco.com/shop/products/decal-diesel-red-on-white-12-inch-x-3-inch|https://spatco.com//assets/products/images/PD-105-12.jpg|in stock|4.45 USD|0.25 lb|Performance Ink|Red on White|new|no| NC-5|NC-5|OUT OF ORDER Bag for Nozzle (Pack of 6)|Communicate clearly to customers that your pump is temporarily out of order. Yellow color draws attention.|https://spatco.com/shop/products/out-of-order-bag-for-nozzle-pack-of-6|https://spatco.com//assets/products/images/NC-5.jpg|in stock|12.06 USD|0.25 lb|Performance Ink|Yellow|new|no| MS-76|MS-76|Emergency Shut-Off Switch Aluminum Sign - 12 inch x 8 inch|The Emergency Shut-off Switch sign helps keep all safe and up to code by clearly identifying where the emergency shut-off switch is located in the event of an emergency. Measures 12 wide x 8 tall.|https://spatco.com/shop/products/emergency-shut-off-switch-aluminum-sign-12-inch-width-x-8-inch-height|https://spatco.com//assets/products/images/MS-76.jpg|in stock|22.49 USD|0.3 lb|Performance Ink|Red on White|new|no| MD-801W|MD-801W|Contains 10% Ethanol Decal 6 inch width x 2 inch height|Single-sided, peel and stick vinyl decal is white with black letters.|https://spatco.com/shop/products/contains-10-ethanol-decal-6-inch-width-x-2-inch-height|https://spatco.com//assets/products/images/MD-801W.jpg|in stock|5.7 USD|0.5 lb|Performance Ink||new|no| MD-209|MD-209|On Road Diesel Decal 10 inch width x 6 inch height|Decal reads, On Road Diesel Fuel. Highway Use Only. Measures 10 x 6 and is white with red lettering.|https://spatco.com/shop/products/on-road-diesel-decal-with-red-letters-on-white-background-10-inch-width-x-6-inch-height|https://spatco.com//assets/products/images/MD-209.jpg|in stock|4.95 USD|0.1 lb|Performance Ink|Red on White|new|no| ES500S-93|ES500S-93|93 Octane Decal for Encore 500 ES|Decal for 93 Octane is yellow with black letters. For the Gilbarco Encore 500 ES dispenser.|https://spatco.com/shop/products/93-octane-decal-for-encore-500-es|https://spatco.com//assets/products/images/ES500S-93.jpg|in stock|4.95 USD|0.5 lb|Performance Ink||new|no| ES500S-89|ES500S-89|89 Octane Decal for Encore 500 ES|Decal for 89 Octane is yellow with black letters. For the Gilbarco Encore 500 ES dispenser.|https://spatco.com/shop/products/89-octane-decal-for-encore-500-es|https://spatco.com//assets/products/images/ES500S-89.jpg|in stock|4.95 USD|0.5 lb|Performance Ink||new|no| ES500S-87|ES500S-87|87 Octane Decal for Encore 500 ES|Decal for 87 Octane is yellow with black letters. For the Gilbarco Encore 500 ES dispenser.|https://spatco.com/shop/products/87-octane-decal-for-encore-500-es|https://spatco.com//assets/products/images/ES500S-87.jpg|in stock|4.95 USD|1.5 lb|Performance Ink||new|no| CET-40|CET-40|Minimum Rating 40 Cetane Decal 2.5 inch width x 3.25 inch height|Single-sided peel and stick black and yellow decal states MINIMUM RATING 40 CETANE.|https://spatco.com/shop/products/minimum-rating-40-cetane-decal-2-5-inch-width-x-3-25-inch-height|https://spatco.com//assets/products/images/CET-40.jpg|in stock|2.5 USD|1 lb|Performance Ink|Black on Yellow|new|no| OCT93|OCT93|93 Octane Decal 3 inch width x 2.5 inch height|Dispenser decal states: MINIMUM OCTANE RATING (R+M) / 2 METHOD 93. Yellow background with black lettering.|https://spatco.com/shop/products/93-octane-decal-3-inch-width-x-2-5-inch-height|https://spatco.com//assets/products/images/OCT93.jpg|in stock|2.1 USD|0.7 lb|Performance Ink|Black on Yellow|new|no| OCT89|OCT89|89 Octane Decal 3 inch width x 2.5 inch height|Decal states MINIMUM OCTANE RATING (R+M) / 2 METHOD 89. Yellow with black lettering.|https://spatco.com/shop/products/89-octane-decal-3-inch-width-x-2-5-inch-height|https://spatco.com//assets/products/images/OCT89.jpg|in stock|2.1 USD|0.3 lb|Performance Ink|Black on Yellow|new|no| OCT87|OCT87|87 Minimum Octane Rating Decal 3 inch width x 2.5 inch height|Dispenser decal states: MINIMUM OCTANE RATING (R+M) / 2 METHOD 87. Yellow background with black lettering.|https://spatco.com/shop/products/87-minimum-octane-rating-decal-3-inch-width-x-2-5-inch-height|https://spatco.com//assets/products/images/OCT87.jpg|in stock|2.1 USD|0.3 lb|Performance Ink|Black on Yellow|new|no| SS16|SS16|Gasoila Soft-Set Thread Sealant with PTFE|Gasoila SS16 Soft-Set Thread Sealant with PTFE (1 pt) is a soft-setting, non-toxic, PTFE paste. The sealant provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, LPG cylinders, pump assemblies, oil burners, hydraulics, compressors, engines, motors, housings, plugs, fuel lines, couplings and more. This Gasoila thread sealant provides excellent resistance to gasoline (up to 20% alcohol and petroleum blends), petroleum solvents, kerosene, diesel oil, propane, butane LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more.|https://spatco.com/shop/products/gasoila-soft-set-thread-sealant-with-ptfe|https://spatco.com//assets/products/images/SS16.jpg|in stock|27.64 USD|1 lb|Gasoila Chemicals||new|no| SARGEL|SARGEL|SAR-GEL Blue 1oz. CMR-Free Water Finding Paste|Water contamination in fuel tanks can ruin valuable product, causing loss of inventory and profit. Sartomer developed SAR-GEL® BLUE water finding paste for quick and reliable detection of water in the bottom of tanks containing gasoline, E10 gasoline, diesel, jet fuel, fuel oil, biodiesel, light crude oil, solvents and other materials incompatible with water. SAR-GEL® BLUE is carcinogenic, mutagenic, reprotoxic (CMR) substances-free and easy to use.|https://spatco.com/shop/products/sar-gel-water-finding-paste|https://spatco.com//assets/products/images/sargel-blue.png|in stock|7.5 USD|0.25 lb|Arkema ||new|no| BT1200|BT1200|Barricade Yellow CAUTION Tape 3 inch x 1000 foot|BT1200 is a high-strength, high-visibility barricade tape. It is manufactured with a superior quality, virgin, yellow opaque poly-material and printed with ultra-bond, jet black ink that penetrates the plastic surface. Scratch-proof and weather-resistant.|https://spatco.com/shop/products/barricade-yellow-caution-tape-3-inch-x-1000-foot|https://spatco.com//assets/products/images/BT1200.jpg|in stock|16 USD|1 lb|Keson|Black on Yellow|new|no| AP02|AP02|Gasoila AP02 All Purpose Water Finding Paste 2 ounce tube (E-10 applications)|The fast, reliable product for detecting water in fuel storage tanks.|https://spatco.com/shop/products/gasoila-ap02-all-purpose-water-finding-paste-2-ounce-tube-e-10-applications|https://spatco.com//assets/products/images/AP02.jpg|in stock|8.39 USD|0.5 lb|Gasoila Chemicals||new|no| 3OZ-KK|3OZ-KK|Kolor Kut 3 oz. Water Finding Paste|For testing the presence of water at the bottom of fuel storage tanks. Applied to a rod / length of string with bottom weight, the brown paste changes color from golden brown to brilliant red where it comes into contact with water, providing a visual indication as to the depth of the water present. The water can then be pumped out, and the test repeated until there is insufficient water to pump. For these applications: ammonia, hydrocarbons, hydrochloric acid, nitric acid, petroleum, salt, soap solutions, sulfuric acid and other chloride solutions. Comes in a 3 oz. tube.|https://spatco.com/shop/products/kolor-kut-three-ounce-water-finding-paste|https://spatco.com//assets/products/images/3OZ-KK.jpg|in stock|5.52 USD|1 lb|Kolor Kut||new|no| 436|436|John Dow Model JDI-436ZB Zip Boot Flex Connector 4 inch x 36 inch|The Zip-Boot is designed to isolate flex connections or systems that have not previously been isolated. Zip-Boot is a fast and easy way to install and does not require that the piping be opened for installation. Does not contain clamps or adhesive. |https://spatco.com/shop/products/johndow-model-jdi-436zb-zip-boot-kit-for-flex-connector-4-inch-x-36-inch|https://spatco.com//assets/products/images/436.jpg|in stock|67.17 USD|0.85 lb|John Dow Industries|Black|new|no| 125781C|125781C|Steelflex Ultra Hardwall Breakaway Whip Hose 5/8 inch x 8 inch|A heavy duty non-collapsible hardwall hose for dispensing gasoline, this construction has minimal cubical expansion. Handles 50% aromatic hydrocarbons and unleaded gasoline. With zinc/aluminum crimped couplings.|https://spatco.com/shop/products/steelflex-ultra-hardwall-breakaway-whip-hose-5-8-inch-x-8-inch-with-zinc-aluminum-crimped-couplings|https://spatco.com//assets/products/images/125781C.jpg|in stock|22.15 USD|0.5 lb|Irpco|Black|new|no| 125171C|125171C|Fuel Flo Steelflex 125171FL Ultra Hardwall Curb Pump Hose 5/8 inch x 9-1/2 foot|5/8 inch x 9 1/2 foot with male by male zinc/aluminum crimped couplings. |https://spatco.com/shop/products/fuel-flo-steelflex-125171fl-ultra-hardwall-curb-pump-hose-5-8-inch-x-9-1-2-foot|https://spatco.com//assets/products/images/125171C.jpg|in stock|71.11 USD|4.4 lb|Irpco|Black|new|no| 125142C|125142C|Fuel Flo Steelflex 125142FL Ultra Hardwall Curb Pump Hose 5/8 inch x 9 foot|5/8 x 9 with Male by Male Swivel Zinc/Aluminum Crimped Couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-125142fl-ultra-hardwall-curb-pump-hose-5-8-inch-x-9-foot-with-male-by-swivel-zinc-aluminum-crimped-couplings-125142fl|https://spatco.com//assets/products/images/125142C.jpg|in stock|81.24 USD|6 lb|Irpco|Black|new|no| 125141C|125141C|Fuel Flo Steelflex 125141C Ultra Hardwall Curb Pump Hose 5/8 inch x 9 foot (3/4″ M X M Ends)|5/8 inch x 9 foot with 3/4 inch male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-125141fl-ultra-hardwall-curb-pump-hose-5-8-inch-x-9-foot|https://spatco.com//assets/products/images/125141C.jpg|in stock|62.53 USD|4.1 lb|Irpco|Black|new|no| 125121C|125121C|Fuel Flo 125121FL Steelflex Ultra Hardwall Curb Pump Hose 5/8 inch x 8 1/2 foot|Hardwall Curb Pump Hose is 5/8 inch x 8 1/2 foot. Has male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-ultra-hardwall-curb-pump-hose-5-8-inch-x-8-1-2-foot-with-male-by-male-zinc-aluminum-crimped-couplings-125121fl|https://spatco.com//assets/products/images/125121C.jpg|in stock|59.27 USD|4.05 lb|Irpco|Black|new|no| 124301CG|124301CG|Fuel Flo Steelflex 124301FLG Ultra Hardwall Curb Pump Hose 3/4 inch x 9 foot - Green|3/4 inch x 9 foot with male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-124301flg-ultra-hardwall-curb-pump-green-hose-3-4-inch-x-9-foot-green|https://spatco.com//assets/products/images/124301CG.jpg|in stock|82.09 USD|4.95 lb|Irpco|Green|new|no| 124301C|124301C|Fuel Flo Steelflex 124301FL Ultra Hardwall Curb Pump Hose 3/4 inch x 9 foot (5/16″ M X M Ends)|3/4 inch x 9 foot with 5/16 inch male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-ultra-hardwall-curb-pump-hose-3-4-inch-x-9-foot-with-male-by-male-zinc-aluminum-crimped-couplings-124301fl|https://spatco.com//assets/products/images/124301C.jpg|in stock|59.27 USD|7 lb|Irpco|Black|new|no| 124211C|124211C|Fuel Flo Steelflex 124211FL Ultra Hardwall Curb Pump Hose 3/4 inch x 4 foot|3/4 inch x 4 foot with male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-124211fl-ultra-hardwall-curb-pump-hose-3-4-inch-x-4-foot|https://spatco.com//assets/products/images/124211C.jpg|in stock|55.05 USD|2.9 lb|Irpco|Black|new|no| 124041C|124041C|Fuel Flo Steelflex 124041FL Ultra Hardwall Breakaway Whip Hose 3/4 inch x 9 inch|3/4 inch x 9 inch with male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/steelflex-124041fl-ultra-hardwall-breakaway-whip-hose-3-4-inch-x-9-inch-with-zinc-aluminum-crimped-couplings|https://spatco.com//assets/products/images/124041C.jpg|in stock|26.25 USD|2 lb|Irpco|Black|new|no| 123301C|123301C|Fuel Flo 123301FL Steelflex Ultra Hardwall Curb Pump Hose 1 inch x 12 foot|1 inch x 12 foot with male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-123301fl-ultra-hardwall-curb-pump-hose-1-inch-x-12-foot|https://spatco.com//assets/products/images/123301C.jpg|in stock|113.69 USD|8.1 lb|Irpco|Black|new|no| 123241C|123241C|Fuel Flo Steelflex 123241FL Ultra Hardwall Curb Pump Hose 1 inch x 10 foot|1 inch x 10 foot with male by male zinc/aluminum crimped couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-ultra-hardwall-curb-pump-hose-1-inch-x-10-foot-with-male-by-male-zinc-aluminum-crimped-couplings-123241fl|https://spatco.com//assets/products/images/123241C.jpg|in stock|104.91 USD|6.7 lb|Irpco|Black|new|no| 123061C|123061C|Fuel Flo Steelflex 123061FL Ultra Hardwall Breakaway Whip Hose 1 inch x 12 inch|Model #123061FL as Zinc/Aluminum Crimped Couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-ultra-hardwall-breakaway-whip-hose-1-inch-x-12-inch-with-zinc-aluminum-crimped-couplings|https://spatco.com//assets/products/images/123061C.jpg|in stock|35.42 USD|1.5 lb|Irpco|Black|new|no| 125142|125142|Fuel Flo Steelflex 125142FL Ultra Hardwall Curb Pump Hose 5/8 inch x 9 foot|5/8 x 9 Male x Male Swivel Chrome-plated Brass Couplings.|https://spatco.com/shop/products/fuel-flo-steelflex-125142fl-ultra-hardwall-curb-pump-hose-5-8-inch-x-9-foot|https://spatco.com//assets/products/images/125142.jpg|in stock|107.75 USD|4.55 lb|Irpco|Black|new|no| 70068|70068|Cim-Tek 70068 Model 800HS-30, 1 inch flow 30 Micron Hydrosorb/Particulate Removal Filter|The 70068 combines particulate removal with water absorption for the ultimate in fuel purity. This 30 micron Hydrosorb® filter removes common contaminants such as dirt, dust, and rust while absorbing water. Designed to swell when water is present, the media slows the flow to alert you that your filter needs to be changed. It measures 5 X 11, has a 1-1/2 - 16 nose thread (where the filter screws on). |https://spatco.com/shop/products/cim-tek-70068-model-800hs-30-1-inch-flow-30-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps|https://spatco.com//assets/products/images/70068.jpg|in stock|28.7 USD|3.25 lb|Central Illinois||new|no| 70067|70067|Cim-Tek 70067 Model 260HS-30, 3/4 inch flow 30 Micron Hydrosorb /Particulate Removal Extended Life Filter|The 70067 Hydrosorb® filter is capable of removing common contaminants such as dirt, dust, and rust and can also detect and absorb water, keeping your fuel at its cleanest level. The spin-on design allows for faster and easier change-out. |https://spatco.com/shop/products/cim-tek-70067-3-4-inch-flow-30-micron-hydrosorb-water-absorbing-particulate-removal-filter-for-for-fuel-dispensers-and-commercial-fueling-pumps-extended-length-for-longer-life|https://spatco.com//assets/products/images/70067.jpg|in stock|15.33 USD|3.1 lb|Central Illinois||new|no| 70034|70034|Cim-Tek 70034 Model 450-10, 1 inch flow 10 Micron Particulate Removal Extended Life Filter|The 70034 is designed with extended length in order to provide an extended life. It measures 3-3/4 X 8 and has a 1-1/2-16 nose thread (where the filter screws on). The extra length provides longer filter life and fewer change-outs with more filtering capacity. The 10 micron cellulose removes common contaminants such as dirt, dust, and rust and can be used with gasoline, diesel, biodiesel blends up to B20, and ultra-low sulfur diesel (ULSD). |https://spatco.com/shop/products/cim-tek-70034-model-450-10-1-inch-flow-10-micron-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps-extended-length-for-longer-life|https://spatco.com//assets/products/images/70034.jpg|in stock|12.59 USD|3 lb|Central Illinois||new|no| 70032|70032|Cim-Tek 70032 Model 450BMG-10, 1 inch Flow 10 Micron Particulate Removal Extended Life Filter|The 70032 measures 3-3/4 x 8 and has a 1-1/2 - 16 nose thread (where the filter screws on). The extra length provides longer filter life and fewer change-outs with more filtering capacity. |https://spatco.com/shop/products/cim-tek-70032-model-450bmg-10-1-inch-flow-10-micron-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps-extended-length-for-longer-life|https://spatco.com//assets/products/images/70032.jpg|in stock|19.66 USD|3.2 lb|Central Illinois||new|no| 70027|70027|Cim-Tek 70027 Model 450-30, 1 inch flow 30 Micron Particulate Removal Extended Life Filter|The 70027 is designed with extended length in order to provide an extended life. It measures 3-3/4 X 8 and has a 1 1/2-16 nose thread (where the filter screws on). The extra length provides longer filter life and fewer change-outs with more filtering capacity. The 30 micron cellulose removes common contaminants such as dirt, dust, and rust and can be used with gasoline, diesel, biodiesel, and ultra-low sulfur diesel (ULSD). |https://spatco.com/shop/products/cim-tek-70027-model-450-30-1-inch-flow-30-micron-particulate-removal-filter-for-fuel-dispensers-and-commercial-fueling-pumps-extended-length-for-longer-life|https://spatco.com//assets/products/images/70027.jpg|in stock|12.36 USD|3 lb|Central Illinois||new|no| 60001|60001|Cim-Tek 60001 Pre-Vent Cap and Cast Iron Base with Vapor Control|The Pre-Vent is a fill cap with a pressure and vacuum release that reduces evaporation in fuel storage tanks and helps maintain the quality of stored fuel. For use on small aboveground, commercial gasoline and distillate, fuel transfer, and small oil storage tanks. Made in the USA.|https://spatco.com/shop/products/cim-tek-60001-pre-vent-cap-and-cast-iron-base-with-vapor-control|https://spatco.com//assets/products/images/60001.jpg|in stock|19.51 USD|3 lb|Central Illinois||new|no| 50003|50003|Cim-Tek 50003 Cast Iron Mounting Adaptor|Cim-Teks heavy-duty cast-iron mounting adaptor (commonly known as a filter head) is made to withstand the harsh elements and last for years. For use with our 70002,70046, 70819,70003, 70094, 70095, 70230, 70234, 70062, 70067, 70232, 70236, 70806, 70010, 70012, 70057, 70058, 70122, 70018, 70059, and 70064 filters. |https://spatco.com/shop/products/cim-tek-50003-cast-iron-mounting-adaptor|https://spatco.com//assets/products/images/50003.jpg|in stock|15.59 USD|2.6 lb|Central Illinois||new|no| 30036|30036|Cim-Tek 30036 30 Micron Hydrosorb Replacement Element - Water Detecting|Designed for commercial filtering, the 30036 (EHS-30) 30 micron element is made with Cim-Teks versatile Hydrosorb® media that removes contaminants while detecting water in your fuel. The 4 13/16 X 9 1/4 drop-in design makes change-out a breeze. |https://spatco.com/shop/products/cim-tek-30036-30-micron-hydrosorb-replacement-element-water-detecting|https://spatco.com//assets/products/images/30036.jpg|in stock|26.46 USD|1.8 lb|Central Illinois||new|no| 30004|30004|Cim-Tek 30004 Cellulose Replacement Element (Particulate Filtration)|Cim-Tek offers a convenient, drop-in replacement element for use with the Centurion housings. Designed for high-volume applications for commercial filtering, the 30 micron cellulose element removes particulates such as dirt, dust, and rust. This element is versatile, measures 4 13/16 X 9 1/4 and can be used with many applications. |https://spatco.com/shop/products/cim-tek-30004-cellulose-replacement-element-particulate-filteration|https://spatco.com//assets/products/images/30004.jpg|in stock|14.9 USD|1.7 lb|Central Illinois||new|no| 1808-16|1808-16|Husky Waffle Splash Guard - BP Green|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes.|https://spatco.com/shop/products/waffle-splash-guard-bp-green|https://spatco.com//assets/products/images/1808-16.jpg|in stock|3.33 USD|1 lb|Husky|BP Green|new|no| 1808-09|1808-09|Husky Waffle Splash Guard - Silver|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes.|https://spatco.com/shop/products/waffle-splash-guard-silver|https://spatco.com//assets/products/images/1808-09.jpg|in stock|4.63 USD|0.25 lb|Husky|Silver|new|no| 1808-08|1808-08|Husky Waffle Splash Guard - Gold|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes.|https://spatco.com/shop/products/waffle-splash-guard-gold|https://spatco.com//assets/products/images/1808-08.jpg|in stock|4.63 USD|0.25 lb|Husky|Gold|new|no| 1808-04|1808-04|Husky Waffle Splash Guard - Black|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes.|https://spatco.com/shop/products/waffle-splash-guard-black|https://spatco.com//assets/products/images/1808-04.jpg|in stock|4.63 USD|0.25 lb|Husky|Black|new|no| 1808-03|1808-03|Husky Waffle Splash Guard - Green|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes.|https://spatco.com/shop/products/waffle-splash-guard-green|https://spatco.com//assets/products/images/1808-03.jpg|in stock|4.63 USD|0.25 lb|Husky|Green|new|no| 1808-02|1808-02|Husky Waffle Splash Guard - Red|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes. |https://spatco.com/shop/products/waffle-splash-guard-red|https://spatco.com//assets/products/images/1808-02.jpg|in stock|4.63 USD|0.25 lb|Husky|Red|new|no| 1808-01|1808-01|Husky Waffle Splash Guard - Blue|Unique waffle pattern for this guard was invented by Husky in 1989. Guards against fuel splashes.|https://spatco.com/shop/products/waffle-splash-guard-blue|https://spatco.com//assets/products/images/1808-01.jpg|in stock|4.63 USD|0.25 lb|Husky|Blue|new|no| 159561-03|159561-03|Husky XS 159561-033 3/4 inch Light Duty Diesel Nozzle with Three Position Hold Open Clip and Waffle Splash Guard - Green|The Husky XS 159561-03 light duty diesel nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip and waffle splash guard. |https://spatco.com/shop/products/husky-xs-159561-033-3-4-inch-light-duty-diesel-nozzle-with-three-position-hold-open-clip-and-waffle-splash-guard-green|https://spatco.com//assets/products/images/159561-03.jpg|in stock|72.02 USD|3.1 lb|Husky|Green|new|no| 159559-04|159559-04|Husky XS 159559-04 3/4 inch Unleaded Automatic Shut-Off Nozzle with Three Position Hold Open Clip and Waffle Splash Guard - Black|The Husky XS 159559-04 unleaded gasoline nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip and waffle splash guard. |https://spatco.com/shop/products/husky-xs-159559-04-3-4-inch-unleaded-automatic-shut-off-nozzle-with-three-position-hold-open-clip-and-waffle-splash-guard-black|https://spatco.com//assets/products/images/159559-04.jpg|in stock|72.02 USD|3.1 lb|Husky|Black|new|no| 159504-08|159504-08|Husky XS 159504-08 3/4 inch Unleaded Automatic Shut-Off Nozzle - Comes with Three Position Hold Open Clip - Gold|The Husky XS 159504-08 unleaded gasoline nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip. |https://spatco.com/shop/products/husky-xs-3-4-inch-unleaded-automatic-shut-off-nozzle-comes-with-three-position-hold-open-clip-gold|https://spatco.com//assets/products/images/159504-08.jpg|in stock|80.83 USD|3.1 lb|Husky|Gold|new|no| 159504-02|159504-02|Husky XS 159504-02 3/4 inch Unleaded Automatic Shut-Off Nozzle - Comes with Three Position Hold Open Clip - Red|The Husky XS 159504-02® unleaded gasoline nozzle is equipped with Flo-Stop technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip.|https://spatco.com/shop/products/husky-xs-159504-02-3-4-inch-unleaded-automatic-shut-off-nozzle-comes-with-three-position-hold-open-clip-red|https://spatco.com//assets/products/images/159504-02.jpg|in stock|80.83 USD|4 lb|Husky|Red|new|no| 159504-01|159504-01|Husky XS 159504-01 3/4 inch Unleaded Automatic Shut-Off Nozzle - Blue|The Husky XS 159504-01 unleaded gasoline nozzle is equipped with Flo-Stop® technology to prevent flow if the nozzle is dropped or if the tank becomes full during fueling. This nozzle is also built with StreamShaper® which reduces back splash and helps promote quicker, more hassle-free fueling. Ships with three notch hold open clip.|https://spatco.com/shop/products/husky-xs-159504-01-3-4-inch-unleaded-automatic-shut-off-nozzle-comes-with-three-position-hold-open-clip-blue|https://spatco.com//assets/products/images/159504-01.jpg|in stock|80.83 USD|5 lb|Husky|Blue|new|no| 8330|8330|Husky 3/4 inch Female MagBreak Re-connectable Magnetic Breakaway|Huskys premium magnetic re-connectable breakaway features a simple twist to lock reconnection method making re-attachment easy while retaining UL listing. Stops the flow of fuel on both sides of the separation. |https://spatco.com/shop/products/husky-8330-3-4-inch-female-magbreak-reconnectable-magnetic-breakaway|https://spatco.com//assets/products/images/8330.jpg|in stock|70.6 USD|4 lb|Husky||new|no| 6310|6310|Husky 3/4 inch Male Multi-Plane Swivel connected to 3/4 inch Female Re-connectable Safe-T-Break®|Huskys 6310 Multi-Plane Swivel/Breakaway Combo (3/4 male swivel x 3/4 female Safe-T-Break®) features a 360 degree range of rotation for easy nozzle movement. This unit also features a combination re-connectable breakaway which eliminates the need for a whip hose when installed next to the nozzle. Use with standard fueling applications.|https://spatco.com/shop/products/husky-6310-3-4-inch-male-multi-plane-swivel-connected-to-3-4-inch-female-reconnectable-safe-t-break|https://spatco.com//assets/products/images/6310.jpg|in stock|143.8 USD|4 lb|Husky||new|no| 5812|5812|Husky 1 inch Female x 1 inch Female Non-Reconnectable Safe-T-Break|Non-Re-connectable Safe-T-Break® #5812 includes plastisol scuff guard to protect the dispenser after installation; its designed for single use and has a lightweight build. It has been redesigned to raise the separation pull force from less than 300 pounds to less than 350 pounds. Stops the flow of fuel on both sides of the separation and has passed the demanding UL test requirements on separations without leaking or failing.|https://spatco.com/shop/products/husky-5812-1-inch-female-x-1-inch-female-non-reconnectable-safe-t-break|https://spatco.com//assets/products/images/5812.png|in stock|85 USD|3 lb|Husky||new|no| 3360|3360|Husky 3/4 inch Female x 3/4 inch Female Re-connectable Safe-T-Break®|The Husky 3360 Snap-Back Breakaway with Vapor Valve is a re-connectable Safe-T-Break for conventional fueling applications. Features a unique interface between a pre-loaded spring and a single turn wave spring that enables valve to resist sudden pressure build-up in hose and resultant separations. Husky offers leading gas nozzle breakaways.|https://spatco.com/shop/products/husky-3360-3-4-inch-female-x-3-4-inch-female-reconnectable-safe-t-break|https://spatco.com//assets/products/images/3360.jpg|in stock|79.95 USD|1.5 lb|Husky||new|no| 2276|2276|Husky 1 inch Female x 1 inch Female Re-connectable Safe-T-Break®|The Husky 2276 Reconnectable Safe-T-Break is designed for high volume or fleet fueling applications. Separates at less than 200 lbs of pressure and is easily reconnectable for further use.|https://spatco.com/shop/products/husky-2276-1-inch-femalex-1-inch-female-reconnectable-safe-t-break|https://spatco.com//assets/products/images/2276.jpg|in stock|127.58 USD|3 lb|Husky||new|no| 2273|2273|Husky 3/4 inch Female x 3/4 inch Female Non-reconnectable Safe-T-Break|Non-Re-connectable Safe-T-Break® #2273 includes plastisol scuff guard to protect the dispenser after installation; its designed for single use and has a lightweight build. Stops the flow of fuel on both sides of the separation and has passed the demanding UL test requirements on separations without leaking or failing.|https://spatco.com/shop/products/husky-2273-3-4-inch-female-x-3-4-inch-female-non-reconnectable-safe-t-break|https://spatco.com//assets/products/images/2273.jpg|in stock|29.26 USD|1.5 lb|Husky||new|no| 0350|0350|Husky 3/4 inch Female x 3/4 inch Male Multi-Plane Hose Swivel|The Husky 000350 is compatible with unleaded, diesel, and ethanol blends through E10. Typically used for standard fueling applications. |https://spatco.com/shop/products/husky-3-4-inch-female-x-3-4-inch-male-multi-plane-hose-swivel|https://spatco.com//assets/products/images/0350.jpg|in stock|26.37 USD|2 lb|Husky||new|no| 0087|0087|Husky 1 inch Male x 1 inch Female Multi-Plane Hose Swivel|The Husky 0087 is compatible with diesel and Ethanol blends up to E10. The 0087 swivel is typically used in high volume or fleet fueling applications.|https://spatco.com/shop/products/husky-0087-1-inch-male-x-1-inch-female-multi-plane-hose-swivel|https://spatco.com//assets/products/images/0087.jpg|in stock|47.65 USD|1.8 lb|Husky||new|no| 3570|3570|3M Scotchcast Connector Sealing Pack|Scotchcast™ connector sealing pack. Insulates and provides protection for electrical spring connectors against dust, soil, water, and other environmental elements. Each sealing pack contains a specific amount of the two-part 3M™ Scotchcast™ Epoxy Resin 3570G-N in a unique closed mixing pouch. The resin generates its own heat to cure and its compatibility with spring connectors makes this sealing pack a convenient insulating and encapsulating resin for electrical spring connections. (Veeder Root P/N 514100-304.)|https://spatco.com/shop/products/three-m-model-3570g-n-scotchcast-connector-sealing-pack|https://spatco.com//assets/products/images/3570.jpg|in stock|7.95 USD|0.1 lb|Three M|Black|new|no| SPC-100-1|SPC-100-1|Oil Absorbent Mat 15 inch x 18 inch with 22 Gal/Absorption - Single Sheet|Specialized for oil and other petroleum-based spills. Oil-only pads. Will not absorb water. Heavyweight material, dimpled and perforated|https://spatco.com/shop/products/oil-absorbent-mat-15-inch-x-18-inch-with-22-gal-sorption|https://spatco.com//assets/products/images/SPC-100-1.jpg|in stock|2.5 USD|0.2 lb|Gehring||new|no| 303-1530|303-1530|Universal Valve Co. Shorty Offset Adapter 1-1/2 Inch x 3 Inch NPT|Compensates for misalignment of the dispenser, suction stub and dispenser boxes,where space is critical. Allows for easy, fast dispenser up-grades.|https://spatco.com/shop/products/universal-valve-co-offset-adapter-1-1-2-inch-x-3-inch-npt|https://spatco.com//assets/products/images/303-1530.jpg|in stock|67.82 USD|3.2 lb|Universal Valve||new|no| WU014426-0002-R|WU014426-0002-R|Wayne Zebra 60MM Printer (without sensor)|Remanufactured thermal printer for Wayne Ovation and Helix dispensers. Does not include sensor. Refund of $375.00 when the core is returned. |https://spatco.com/shop/products/wayne-zebra-60mm-printer-without-sensor|https://spatco.com//assets/products/images/WU014426-0002.jpg|in stock|750 USD|5 lb|Wayne||new|no| WU004912-0002|WU004912-0002|Wayne Secure Payment Module Battery Assembly|Has FET protection shrink for SPM keypad.|https://spatco.com/shop/products/wayne-secure-payment-moduel-battery-assembly|https://spatco.com//assets/products/images/WU004912-0002.jpg|in stock|93.17 USD|0.15 lb|Wayne||new|no| WU003096-R|WU003096-R|Wayne IX R2 Secure CPU Board with application|Fits Wayne Ovation and Ovation IX.|https://spatco.com/shop/products/wayne-ix-r2-secure-cpu-board-with-application|https://spatco.com//assets/products/images/WU003096-R.jpg|in stock|600 USD|4 lb|Wayne||new|no| WU003083-0002-R|WU003083-0002-R|Wayne IX-R2 CPU Board with Mac Address, 806MHZ|The Wayne IX-R2 CPU board has a Mac address and is 806MHZ.|https://spatco.com/shop/products/wayne-ix-r2-cpu-board-with-mac-address-806mhz|https://spatco.com//assets/products/images/WU003083-0002-R.jpg|in stock|890.16 USD|4 lb|Wayne||new|no| WU001636-0001|WU001636-0001|Wayne Aggressive Fuels Meter Service Kit|Includes: 4 Fluorosilicone O-rings for cylinder covers.4 Heavy duty cast aluminum cylinder covers.16 Longer anti-vibration screws for heavy duty cylinder covers.2 Fluorosilicone O-rings for dome.2 Fluorosilicone O-rings for check valve covers.2 Heavy duty stainless steel check valve covers|https://spatco.com/shop/products/wayne-aggressive-fuels-service-kit|https://spatco.com//assets/products/images/WU001636-0001.jpg|in stock|215.67 USD|2.7 lb|Wayne||new|no| WU001031-R00|WU001031-R00|Wayne Blue IX Secure CAT Board|Secure electronic CAT Board is for Wayne iX Pay.|https://spatco.com/shop/products/wayne-blue-ix-secure-cat-board|https://spatco.com//assets/products/images/WU001031-R00.jpg|in stock|625 USD|2 lb|Wayne||new|no| WU000805-0005|WU000805-0005|Wayne Push to Start Switch/Button with Green Shell|The Push to Start Switch/Button with Green Shell is for the Wayne Vista dispenser.|https://spatco.com/shop/products/waynepush-to-start-switch-button-with-green-shell-for-vista-dispenser|https://spatco.com//assets/products/images/WU000805-0005.jpg|in stock|150.7 USD|2 lb|Wayne||new|no| WM011531-0001|WM011531-0001|Wayne Circular Check Valve|Circular Check Valve For Wayne Xflo Meter.|https://spatco.com/shop/products/wayne-circular-check-valve|https://spatco.com//assets/products/images/WM011531-0001.jpg|in stock|88.77 USD|1 lb|Wayne||new|no| WM001908-R003|WM001908-R003|Wayne iGEM Printer Circuit Board Assembly|This rebuilt iGEM printer Circuit Board has Cloop/Dart PCB assembly. Refund of $325 with return of core.|https://spatco.com/shop/products/wayne-igem-cloop-dart-pcb-assembly|https://spatco.com//assets/products/images/WM001908-R003.jpg|in stock|667.72 USD|1.65 lb|Wayne||new|no| W2893702-002|W2893702-002|Wayne Valve Conduit for Ovation Dispensers|With straight conduit.|https://spatco.com/shop/products/wayne-valve-conduit-for-ovation-dispensers|https://spatco.com//assets/products/images/W2893702-002.jpg|in stock|386.73 USD|1.75 lb|Wayne||new|no| W2893702-001|W2893702-001|Wayne Valve Conduit with Pin for Ovation Dispensers|With S bend conduit.|https://spatco.com/shop/products/wayne-valve-conduit-with-pin-for-ovation-dispensers|https://spatco.com//assets/products/images/W2893702-001.jpg|in stock|334.08 USD|1.75 lb|Wayne||new|no| 892645-002-025|892645-002-025|Wayne Right Side Softkey Overlay for SPM Keypad|This overlay is for the right side of Wayne dispenser keypads.|https://spatco.com/shop/products/wayne-right-side-softkey-overlay-for-spm-keypad|https://spatco.com//assets/products/images/892645-002-025.jpg|in stock|8.24 USD|0.1 lb|Wayne||new|no| 892645-001-018|892645-001-018|Wayne Left Side Softkey Overlay for SPM Keypad|This overlay is for the left side of Wayne dispenser keypads.|https://spatco.com/shop/products/wayne-left-side-softkey-overlay-for-spm-keypad|https://spatco.com//assets/products/images/892645-001-018.jpg|in stock|11.35 USD|1 lb|Wayne||new|no| 892645-001-003|892645-001-003|Wayne Left Side Softkey Overlay for SPM Keypad (BJs)|This overlay is for the left side of Wayne dispenser keypads at BJs gas stations.|https://spatco.com/shop/products/wayne-left-side-softkey-overlay-for-spm-keypad-bjs|https://spatco.com//assets/products/images/892645-001-003.jpg|in stock|7.57 USD|0.1 lb|Wayne||new|no| 892136-R02|892136-R02|Wayne Rebuilt Service Kit for Five Product Unit Price Display|This rebuilt service kit is for a five product unit price display (with LED back light) for Wayne Ovation fueling dispensers.|https://spatco.com/shop/products/wayne-rebuilt-service-kit-for-five-product-unit-price-display-with-led-back-light-for-ovation-dispenser|https://spatco.com//assets/products/images/892136-R02.jpg|in stock|403.17 USD|1.5 lb|Wayne||new|no| 892136-R01|892136-R01|Wayne Three Product Unit Price Display|This 3-Product Unit Price Display w/back light is for the Wayne Ovation® fueling dispenser.|https://spatco.com/shop/products/wayne-three-product-unit-price-display|https://spatco.com//assets/products/images/892136-R01.jpg|in stock|375 USD|1.3 lb|Wayne||new|no| 892131-001GEN|892131-001GEN|Generic Wayne Service Kit QVGA Display with LED Back Light|Service kit is for the Wayne Ovation display module (with LED back light). Generic|https://spatco.com/shop/products/wayne-service-kit-qvga-display-with-led-back-light|https://spatco.com//assets/products/images/892131-001.jpg|in stock|166.67 USD|3 lb|Wayne||new|no| 891687-R01|891687-R01|Wayne DW-12 Printer for Ovation|The Wayne DW-12 Thermal Printer is for use in the Ovation fueling dispenser. Refund of $468.90 with return of core.|https://spatco.com/shop/products/wayne-dw-12-printer-for-ovation|https://spatco.com//assets/products/images/891687-R01_2.png|in stock|1399 USD|5 lb|Wayne||new|no| 890510-001|890510-001|Wayne Ovation Door Insert Retainer|For the Wayne Ovation dispenser door.|https://spatco.com/shop/products/wayne-ovation-door-insert-retainer|https://spatco.com//assets/products/images/890510-001.jpg|in stock|2.18 USD|0.01 lb|Wayne||new|no| 889987-002|889987-002|Wayne 889987-002 Ovation Softkey QVGA Keypad Display, Left-Four Positions|This keypad is for the left side of Wayne Ovation dispensers.|https://spatco.com/shop/products/wayne-softkey-keypad-left-side|https://spatco.com//assets/products/images/889987-002.jpg|in stock|65.7 USD|0.1 lb|Wayne||new|no| 889288-001|889288-001|Wayne Dual Sided Sealed Card Reader Kit|Double-sided card reader is for use in Ovation fueling dispensers.|https://spatco.com/shop/products/wayne-dual-sided-sealed-card-reader-kit|https://spatco.com//assets/products/images/889288-001.jpg|in stock|131.47 USD|0.75 lb|Wayne||new|no| 889022-R02|889022-R02|Wayne Rebuilt Ovation Clam Shell Printer|This refurbished printer fits the Ovation dispenser. Includes a feed button.|https://spatco.com/shop/products/wayne-rebuilt-ovation-clam-shell-printer|https://spatco.com//assets/products/images/889022-R02.png|in stock|350 USD|5 lb|Wayne||new|no| 888627-001|888627-001|Wayne Ovation LX Softkey Keypad Panel, Left/Right|Replacement part for the softkey keypad on Wayne Ovation dispensers with 10.4 inch display screen.|https://spatco.com/shop/products/wayne-ovation-lx-softkey-keypad-panel-left-right-fits-10-4-screen|https://spatco.com//assets/products/images/888627-001.jpg|in stock|85.96 USD|0.1 lb|Wayne||new|no| 888460-001-005|888460-001-005|Wayne 89 Octane Decal for Ovation|Wayne Fueling Systems Ovation 89 octane decal is yellow with black lettering.|https://spatco.com/shop/products/wayne-89-octane-decal-for-ovation|https://spatco.com//assets/products/images/888460-001-005.jpg|in stock|6.9 USD|0.1 lb|Wayne||new|no| 888460-001-003|888460-001-003|Wayne 87 Octane Decal for Ovation|Wayne Fueling Systems Ovation octane decal is yellow with black lettering.|https://spatco.com/shop/products/wayne-87-octane-decal-for-ovation|https://spatco.com//assets/products/images/888460-001-003.jpg|in stock|6.9 USD|0.1 lb|Wayne||new|no| 888412-001|888412-001|Wayne Ovation Lower Door Retainer|Ovation Lower Door Retainer replaces original part number 888412-001.|https://spatco.com/shop/products/wayne-ovation-lower-door-retainer|https://spatco.com//assets/products/images/888412-001.jpg|in stock|1.87 USD|0.5 lb|Wayne||new|no| 887693-003|887693-003|Wayne 887693-003 Ovation Printer Door Lock and Key Assembly|Door lock and key assembly is for Wayne Ovation series dispenser printer doors.|https://spatco.com/shop/products/wayne-lock-key-printer-bac-door|https://spatco.com//assets/products/images/887693-003.jpg|in stock|42.5 USD|0.1 lb|Wayne||new|no| 887334-002|887334-002|Wayne Power Supply 24 Volt 0.13-6.25A|Power supply for the Wayne Ovation fuel dispenser series. Its 24 Volt/0.13-6.25A.|https://spatco.com/shop/products/wayne-power-supply-24-volt-0-13-6-25a|https://spatco.com//assets/products/images/887334-002.jpg|in stock|334.13 USD|1.6 lb|Wayne||new|no| 882107-001|882107-001|Wayne Magnetic Card Reader Assembly|Card reader fits Wayne Vista, Gilbarco Advantage I, II and III and W.|https://spatco.com/shop/products/wayne-magnetic-card-reader-assembly|https://spatco.com//assets/products/images/882107-001.jpg|in stock|66.67 USD|0.55 lb|Wayne||new|no| 005-921130-|005-921130-|Wayne Flurosilicon O-Ring|Flurosilicon O-Ring is 0.85|https://spatco.com/shop/products/wayne-flurosilicon-o-ring|https://spatco.com//assets/products/images/005-921130.jpg|in stock|12.02 USD|1 lb|Wayne||new|no| 004-921469-KIT|004-921469-KIT|Wayne Intelligent Pulser Kit|This iGem model eliminates exposed gears and shaft, which offers protection against fuel meter tampering and fuel theft. Replaces the 4-921087 series pulser, 165560, 001-921469, 002-921469, 003-921087. For Wayne iMeters and marked 004-301887 and WM001682-0006.|https://spatco.com/shop/products/wayne-intelligent-pulser-kit|https://spatco.com//assets/products/images/004-921469-KIT.jpg|in stock|297.95 USD|0.4 lb|Wayne||new|no| 002-202021-|002-202021-|Wayne Tamper-Proof Screw For Ovation Lower Door Panel|Quick release screw for the Ovation dispenser lower door panel.|https://spatco.com/shop/products/wayne-tamper-proof-screw-for-ovation-lower-door-panel|https://spatco.com//assets/products/images/002-202021.jpg|in stock|8.97 USD|1.5 lb|Wayne||new|no| 001-921130-|001-921130-|Wayne O-Ring .850 .010 ID x .210 Cross Section|Double bump O-ring is E85/E100 compatible.|https://spatco.com/shop/products/wayne-o-ring-850-010-id-x-210-cross-section|https://spatco.com//assets/products/images/001-921130.jpg|in stock|3.38 USD|0.1 lb|Wayne||new|no| 001-301675-|001-301675-|Wayne Quick Release Retainer for Ovation Dispenser|Quick release retainer is for the lower door of the Ovation dispenser.|https://spatco.com/shop/products/wayne-quick-relase-retainer-for-ovation-dispenser|https://spatco.com//assets/products/images/001-301675.jpg|in stock|1.88 USD|0.5 lb|Wayne||new|no| 000-127417-|000-127417-|Wayne 000-127417- Vista Lock Key Assembly|Lock key is for the Wayne Vista dispenser.|https://spatco.com/shop/products/wayne-000-127417-vista-lock-key-assembly|https://spatco.com//assets/products/images/000-127417.jpg|in stock|40.62 USD|2 lb|Wayne||new|no| 7000703|7000703|Wayne 7000703 Thermal Paper Roll for Wayne Ovation, Vista Crind Printers|Receipt paper for Wayne Crind, Ovation, and Vista printers.|https://spatco.com/shop/products/wayne-thermal-paper-roll-for-ovation-and-vista-crind-printers|https://spatco.com//assets/products/images/7000703.png|in stock|5.28 USD|1.5 lb|Wayne||new|no| 4060703|4060703|Wayne Fluorescent Biaxial Lamp|This u-shaped 7W lamp is for the Wayne Vista dispenser.|https://spatco.com/shop/products/wayne-fluorescent-biaxial-lamp|https://spatco.com//assets/products/images/4060703.jpg|in stock|9.95 USD|0.3 lb|Wayne||new|no| 4027303|4027303|Wayne Enclosed Power Relay 120V UL-CSA|Waynes Enclosed Power Relay has coil volts at 100/120VAC, contact form - relay DPST-NC, DPST-NO, AC contact rating - relay 25A @ 240V (NO), 8A @ 240V (NC), DC contact rating - relay 25A @ 28V.|https://spatco.com/shop/products/wayne-enclosed-power-relay-120v-ul-csa|https://spatco.com//assets/products/images/4027303.jpg|in stock|55.03 USD|0.65 lb|Wayne||new|no| 244OM-0200AV|244OM-0200AV|Morrison 6 inch Emergency Vent with Male NPT mounting connection with Viton A O-Ring|Emergency vents are installed on aboveground storage tanks as a code requirement. They provide high capacity pressure relief if the tank is exposed to fire. When the internal tank pressure reaches the opening pressure of the vent, the weighted cover moves up on the center pin allowing air to escape. When the internal tank pressure falls, the cover automatically lowers back onto the body and is automatically reset. |https://spatco.com/shop/products/morrison-6-inch-emergency-vent-with-male-npt-mounting-connection-with-viton-a-o-ring-8-oz-pressure-setting|https://spatco.com//assets/products/images/244OM-0200AV.jpg|in stock|202.95 USD|20 lb|Morrison Bros.|Black|new|no| 179MCI-0100AC|179MCI-0100AC|Morrison 2 Inch Cast Iron Hinged Fill Cap with Male NPT Threads|Cast iron (powder coated black) body, cast iron (powder coated black) cap with zinc plated steel hinge pin. Designed for tank filling applications where a tight fill connection is not required. |https://spatco.com/shop/products/morrison-2-inch-cast-iron-hinged-fill-cap-with-male-npt-threads|https://spatco.com//assets/products/images/179MCI-0100AC.jpg|in stock|36.53 USD|3 lb|Morrison Bros.|Black|new|no| 179CI-0100AC|179CI-0100AC|Morrison 2 Inch Cast Iron Hinged Fill Cap with Female NPT Threads|Designed for tank filling applications where a tight fill connection is not required. Threaded body installs onto riser pipe or directly into tank bung.|https://spatco.com/shop/products/morrison-2-inch-cast-iron-hinged-fill-cap-with-female-npt-threads|https://spatco.com//assets/products/images/179CI-0100AC.jpg|in stock|38.64 USD|3.5 lb|Morrison Bros.|Black|new|no| TTT-2536|TTT-2536|Test Tube Termination Kit - OPW|Test Tube Termination Kit for Double Wall Pipe Coupling. For DPC and SBC Series.|https://spatco.com/shop/products/test-tube-termination-kit-opw|https://spatco.com//assets/products/images/TTT-2536.jpg|in stock|40.22 USD|0.25 lb|OPW||new|no| SBC-2150|SBC-2150|OPW SBC-2150 Swivel Bolt-On Coupling, 1-1/2 inch NPT|The swivel bolt on coupling eliminates the need to trim back the secondary piping jacket- preventing the need for rubber test boots. Permanent access to the pipes interstice allows for future integrity testing or continuous interstitial monitoring.|https://spatco.com/shop/products/opw-sbc-2150-swivel-bolt-on-coupling-1-1-2-inch-npt|https://spatco.com//assets/products/images/SBC-2150.jpg|in stock|238.39 USD|1.5 lb|OPW||new|no| H-5361|H-5361|OPW Fusible Link for OPW Impact Valves|This lever is used to deactivate the impact (or shear) valve - cutting off fuel supply to a dispenser in the event of a collision or when a customer drives off with the hose still in the vehicle. |https://spatco.com/shop/products/opw-fusible-link-for-opw-impact-valves|https://spatco.com//assets/products/images/H-5361.jpg|in stock|43.17 USD|1 lb|OPW||new|no| D01529M|D01529M|OPW 11B Series 2-Piece Scuff Guard - Green|11B® nozzles are furnished complete with NEWGARD™ 2-piece hand insulators. For a more unique appearance, try our new two-piece design. OPW NEWGARD™ 2-piece hand insulators make it easy to match new color schemes or replace soiled insulators without removing the nozzle from the hose.|https://spatco.com/shop/products/opw-d01529m-11-b-series-2-piece-scuff-guard|https://spatco.com//assets/products/images/D01529M.png|in stock|11.67 USD|1 lb|OPW|Green|new|no| 8Y-0900|8Y-0900|OPW Splash Guard for 11A and 11B - Yellow|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-yellow|https://spatco.com//assets/products/images/8Y-0900.jpg|in stock|7 USD|0.25 lb|OPW|Yellow|new|no| 8S-0200|8S-0200|OPW Splash Guard for 11A and 11B Silver|OPW FILLGARD™ Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back. |https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-silver|https://spatco.com//assets/products/images/8S-0200.jpg|in stock|7 USD|1 lb|OPW|Silver|new|no| 8R-0300|8R-0300|OPW Splash Guard for 11A and 11B - Red|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-red|https://spatco.com//assets/products/images/8R-0300.jpg|in stock|7 USD|0.3 lb|OPW|Red|new|no| 8HY-0900|8HY-0900|OPW 8HY-0900 Splash Guard for 7H / 7HB - Yellow|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-8hy-0900-splash-guard-for-7h-7hb-yellow|https://spatco.com//assets/products/images/8HY-0900.jpg|in stock|4.87 USD|1 lb|OPW|Yellow|new|no| 8HG-0100|8HG-0100|OPW Splash Guard for 7H / 7HB - Green|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-splash-guard-for-7h-7hb-green|https://spatco.com//assets/products/images/8HG-0100.jpg|in stock|5.81 USD|0.25 lb|OPW|Green|new|no| 8HBL-0400|8HBL-0400|OPW Splash Guard for 7H / 7 HB - Black|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-8hbl-0400-splash-guard-for-7h-7-hb-black|https://spatco.com//assets/products/images/8HBL-0400.jpg|in stock|4.87 USD|0.25 lb|OPW|Black|new|no| 8GL-0750|8GL-0750|OPW Splash Guard for 11A and 11B (Gold)|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-gold|https://spatco.com//assets/products/images/8GL-0750.jpg|in stock|5.99 USD|0.25 lb|OPW|Gold|new|no| 8B-0500|8B-0500|OPW Splash Guard for 11A and 11B - Blue|OPW Fillguard Splash Guards are designed to enhance overall nozzle appearance and protect customers from product splash back.|https://spatco.com/shop/products/opw-splash-guard-for-11a-and-11b-blue|https://spatco.com//assets/products/images/8B-0500.jpg|in stock|7 USD|1 lb|OPW|Blue|new|no| 7H-0400|7H-0400|OPW 7H-0400 1-Inch High-Flow Nozzle with Spout Ring - Black|1-inch Automatic High-Speed Nozzle with spout ring. Mainly used with high flow truck and fleet fueling applications. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene.|https://spatco.com/shop/products/opw-1-inch-high-flow-nozzle-with-spout-ring-black|https://spatco.com//assets/products/images/7H-0400.jpg|in stock|172.96 USD|4 lb|OPW|Black|new|no| 66V-1300|66V-1300|OPW 1 inch Single Use Breakaway Valve|OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.|https://spatco.com/shop/products/opw-1-inch-single-use-breakaway-valve|https://spatco.com//assets/products/images/66V-1300.jpg|in stock|112.66 USD|0.98 lb|OPW||new|no| 66V-0492|66V-0492|OPW 3/4 inch Breakaway Valve for Alternative Fuels|OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.The 66V-0492 breakaway is for alternative fuels up to E85.|https://spatco.com/shop/products/opw-66v-0492-3-4-inch-breakaway-valve-for-alternative-fuels|https://spatco.com//assets/products/images/66V-0492.jpg|in stock|170.31 USD|0.6 lb|OPW||new|no| 66V-0300|66V-0300|OPW 3/4 inch Single Use Breakaway Valve|OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.|https://spatco.com/shop/products/opw-3-4-inch-single-use-breakaway-valve|https://spatco.com//assets/products/images/66V-0300.jpg|in stock|49.06 USD|0.6 lb|OPW||new|no| 66REC-1000|66REC-1000|OPW 3/4 inch Dry Re-connectable Breakaway|The OPW 66REC1000 is the first dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses and will separate when subjected to a designated pull force. The dual valves seat automatically, stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment.|https://spatco.com/shop/products/opw-66rec-1000-3-4-inch-dry-reconnectable-breakaway|https://spatco.com//assets/products/images/66REC-1000.jpg|in stock|100.26 USD|1.2 lb|OPW||new|no| 66H-0075|66H-0075|OPW 66H-0075 3/4 inch x 9 inch Whip-Hose Male x Male|For use with any 3/4 inch Breakaway. The OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.|https://spatco.com/shop/products/opw-66h-0075-3-4-inch-x-9-inch-whip-hose-malexmale|https://spatco.com//assets/products/images/66H-0075.jpg|in stock|41.37 USD|1 lb|OPW||new|no| 66CAS-0300|66CAS-0300|OPW 66CAS-0300 Re-connectable Inverted Breakaway|The OPW 66CAS-0300 Dry Reconnect Inverted Vac Assist Breakaway is designed to close off the liquid path and the vapor path in the event of a drive-away. For use with Stage II Vapor Recovery Systems. This breakaway has a 300 lbs. breaking force and requires only 15 lbs. of force to reconnect.|https://spatco.com/shop/products/opw-66cas-0300-reconnectable-inverted-breakaway|https://spatco.com//assets/products/images/66CAS-0300.jpg|in stock|165.9 USD|2 lb|OPW||new|no| 66-0075|66-0075|OPW 3/4 inch Single-Use Breakaway with 9 inch Whip Hose|OPW 66-0075 Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system.|https://spatco.com/shop/products/opw-66-0075-3-4-inch-single-use-breakaway-with-9-inch-whip-hose|https://spatco.com//assets/products/images/66-0075.jpg|in stock|89.99 USD|1.46 lb|OPW|Black|new|no| 634TT-7085-EVR|634TT-7085-EVR|OPW 634TT-7085-EVR Grey Top Seal Fill Cap|Tight-Fill Top-Seal Caps are installed on top-seal adaptors, when not in use, to prevent gasoline vapors from escaping and to prevent water, dust and debris from entering the tank. The OPW 634TT is designed to mate with 4 633T, 633TE, 61SA, 633TC, and 633TCP Top-Seal Adaptors. The 634TT is similar to the 633T, except it does not have internal wrenching lugs. Heavy duty and corrosion resistant.|https://spatco.com/shop/products/opw-634tt-7085-evr-grey-top-seal-fill-cap|https://spatco.com//assets/products/images/634TT-7085-EVR.jpg|in stock|49.85 USD|5 lb|OPW||new|no| 633T-8076|633T-8076|OPW 633T-8076 Bronze Top Seal Fill Adaptor|Tight-Fill Top-Seal Adaptors are installed in spill containment manholes on the fill riser pipe from an underground fuel storage tank. They mate with the gravity drop delivery elbow on the transport truck.|https://spatco.com/shop/products/opw-633t-8076-bronze-top-seal-fill-adaptor|https://spatco.com//assets/products/images/633T-8076.jpg|in stock|80.86 USD|2.7 lb|OPW||new|no| 61VSA-1020-EVR|61VSA-1020-EVR|OPW Stage 1 Vapor Recovery Swivel Adaptor - Bronze|The OPW 61 VSA Vapor Swivel Adaptor is a poppeted adaptor - designed to work with a vapor recovery elbow, featuring a top section that rotates with hose movement while the bottom section remains securely sealed to the 4 inch tank riser. It mates with the vapor recovery elbow on the delivery transport truck when recovery of gasoline vapors is required|https://spatco.com/shop/products/opw-61vsa-1020-evr-stage-1-vapor-recovery-swival-adaptor-broze|https://spatco.com//assets/products/images/61VSA-1020-EVR.jpg|in stock|340.91 USD|10.5 lb|OPW||new|no| 61SALP-1020-EVR|61SALP-1020-EVR|OPW 4 inch Low Profile Bronze Swivel Adaptor|The 61SA Swivel Adaptor mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity. Pressure decay testing of underground storage tank systems has identified the joint between the tight-fill adaptor and the nipple or tank riser as a persistent leak point. Considerable movement takes place along the hose while the fill elbow is connected. Walk-downs and changes from one compartment to another move the hose across the pavement, rotating the elbow along with it. The result can be a loosening of the adaptor. As the adaptor backs off, the seal between it and the nipple is relaxed and a leak path is created allowing vapors to escape to the atmosphere. Vacuum-assist dispensing systems can aggravate this situation due to the slight pressurization of the UST.|https://spatco.com/shop/products/opw-61salp-1020-evr-4-inch-low-profile-bronze-swivel-adaptor|https://spatco.com//assets/products/images/61SALP-1020-EVR.jpg|in stock|264.52 USD|9 lb|OPW||new|no| 45-5075|45-5075|OPW 1 inch Hose Swivel|The OPW 45 swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience. The 45 is installed between the nozzle and hose to reduce strain, providing flexibility so fueling hoses last longer.|https://spatco.com/shop/products/opw-45-5075-1-inch-hose-swivel|https://spatco.com//assets/products/images/45-5075.jpg|in stock|84.33 USD|1.16 lb|OPW||new|no| 241TPS-1000|241TPS-1000|OPW 1 inch Two Plane Hose Swivel|The OPW 241TPS-1000 provides two-plane swiveling rotation for easy nozzle positioning and reduced hose wear. The OPW 241TPS swivel is designed for applications where easy nozzle and hose handling is important for customer convenience. It is installed between the nozzle and hose to reduce customer strain, provide flexibility and reduce premature hose wear.|https://spatco.com/shop/products/opw-241tps-1000-1-inch-two-plane-hose-swivel|https://spatco.com//assets/products/images/241TPS-1000.jpg|in stock|56.56 USD|3 lb|OPW||new|no| 241TPS-0492|241TPS-0492|OPW 3/4 Inch Two Plane hose Swivel for Ethanol/E-85 Fuel|The OPW 241TPS provides two-plane swiveling rotation for easy nozzle positioning and reduced hose wear. The swivel is designed for applications where easy nozzle and hose handling is important for customer convenience. The 241TPS is installed between the nozzle and hose to reduce customer strain, provide flexibility and reduce premature hose wear.|https://spatco.com/shop/products/opw-241tps-0492-3-4-inch-two-plane-hose-swivel-for-ethanol-e-85-fuel|https://spatco.com//assets/products/images/241TPS-0492.jpg|in stock|72.14 USD|1 lb|OPW||new|no| 241TPS-0241|241TPS-0241|OPW 3/4 inch Two Plane Hose Swivel|The OPW 241TPS provides two-plane swiveling rotation for easy nozzle positioning and reduced hose wear. It is designed for applications where easy nozzle and hose handling is important for customer convenience. The swivel is installed in between the nozzle and the hose to provide flexibility in the system to reduce customer strain, position the nozzle properly and reduce premature hose wear.|https://spatco.com/shop/products/opw-241tps-0241-3-4-inch-two-plane-hose-swivel|https://spatco.com//assets/products/images/241TPS-0241.jpg|in stock|33.94 USD|1 lb|OPW||new|no| 23-0033|23-0033|OPW 23-0033 Open Atmospheric Vent for Tanks|Open Atmospheric Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. These vents are always open to atmosphere and allow any pressure or vacuum into the tank to vent.|https://spatco.com/shop/products/opw-23-0033-tank-open-atmospheric-vent|https://spatco.com//assets/products/images/23-0033.jpg|in stock|35.02 USD|1 lb|OPW||new|no| 11BP-0992-E85|11BP-0992-E85|OPW 21GE-0992 Yellow Ethanol Nozzle - E85|The OPW 21Ge™ Series nozzles are designed and rigorously tested for use in today’s alternative fuels. It’s the first nozzle of its kind to be UL listed for use in Ethanol blended fuels up to E85 (85% Ethanol).|https://spatco.com/shop/products/opw-21ge-0992-yellow-ethanol-nozzle|https://spatco.com//assets/products/images/21GE-0992.jpg|in stock|320.38 USD|4 lb|OPW|Yellow|new|no| 1C-2105|1C-2105|OPW 1C-2105 5 Gallon Vapor/Spill Containment Manhole|OPW Slip-On Spill Containment Manholes are used on new or existing UST riser pipes. The spill bucket slides onto 3 or 4 fill and vapor return riser pipes and is then secured in place. Slip-on spill containers provide a fast, economical way to replace uncontained manholes or fill boxes.|https://spatco.com/shop/products/opw-1c-2105-5-gallon-vapor-spill-containment-manhole|https://spatco.com//assets/products/images/1C-2105.jpg|in stock|548.33 USD|70 lb|OPW||new|no| 1711T-7085-EVR|1711T-7085-EVR|OPW 1711T-7085-EVR Vapor Recovery Cap 3 inch|For use with 1611AV , 61VSA, 1611AVB, and 1611VR adaptors. The 1711T is installed on the vapor recovery adaptor, when not in use, to prevent vapors from escaping and to prevent water, dust and debris from entering the tank. Constructed of Duratuff® to help prevent corrosion, the OPW 1711T will couple to Civacon/OPW 4 Kamloks, and features a center post that allows an even distribution of force when coupling to the adaptor. The 1711T can be locked with a padlock.|https://spatco.com/shop/products/opw-1711t-7085-evr-vapor-recovery-cap-3-inch|https://spatco.com//assets/products/images/1711T-7085-EVR.jpg|in stock|55.33 USD|1.1 lb|OPW|Orange|new|no| 1611AV-1620|1611AV-1620|OPW 1611AV-1620 Vapor Recovery Adaptor|The OPW 1611AV is a poppeted adaptor, designed to mate with a vapor recovery elbow, for returning gasoline vapor to the tank truck during a fuel delivery to an underground tank.|https://spatco.com/shop/products/opw-1611av-1620-vapor-recovery-adaptor|https://spatco.com//assets/products/images/1611AV-1620.jpg|in stock|149.07 USD|3.25 lb|OPW||new|no| 12VW-0400|12VW-0400|OPW 12VW-0400 Vacuum Assist Nozzle - Black|The OPW 12VW Series automatic nozzles are one of OPWs premium nozzles for Vacuum-Assist vapor recovery systems. Designed with an integrated vapor-valve, they are certified on the most used vapor recovery systems in the world.|https://spatco.com/shop/products/opw-12vw-0400-vacuum-assist-nozzle-black|https://spatco.com//assets/products/images/12VW-0400.jpg|in stock|254.89 USD|4 lb|OPW|Black|new|no| 11BP-0750|11BP-0750|OPW 11BP-0750 Unleaded Automatic Nozzle - Gold|The OPW 11BP® Series is designed for use in retail and commercial filling applications including prepay, self and full service, credit/debit card readers or card-lock systems to help prevent gasoline spills. The OPW 11BP® will not open until the pumping system is pressurized, and closes automatically when the pressure is removed. Nozzle compatible up to E10 (10% Ethanol).|https://spatco.com/shop/products/opw-11bp-0750-unleaded-automatic-nozzle-gold|https://spatco.com//assets/products/images/11BP-0750.jpg|in stock|104.94 USD|2.73 lb|OPW|Gold|new|no| 11BP-0500|11BP-0500|OPW 11BP-0500 Blue Unleaded Nozzle With Hold Open Clip 3/4 Inch Inlet|The OPW 11BP® Series is designed for use in retail and commercial filling applications including prepay, self and full service, credit/debit card readers or card-lock systems to help prevent gasoline spills. The OPW 11BP® will not open until the pumping system is pressurized, and closes automatically when the pressure is removed. Nozzle compatible up to E10 (10% Ethanol).|https://spatco.com/shop/products/opw-11bp-0500-unleaded-automatic-nozzle-blue|https://spatco.com//assets/products/images/11BP-0500.jpg|in stock|104.93 USD|2.73 lb|OPW|Blue|new|no| 11BP-0400|11BP-0400|OPW 11BP-0400 Unleaded Automatic Nozzle - Black|The OPW 11BP® Series is designed for use in retail and commercial filling applications including prepay, self and full service, credit/debit card readers or card-lock systems to help prevent gasoline spills. The OPW 11BP® will not open until the pumping system is pressurized, and closes automatically when the pressure is removed. Nozzle compatible up to E10 (10% Ethanol). Unleaded nozzles are designed for appropriate flow rates and have smaller diameter spouts than diesel or leaded gasoline spouts.|https://spatco.com/shop/products/opw-11bp-0400-unleaded-automatic-nozzle-black|https://spatco.com//assets/products/images/11BP-0400.jpg|in stock|90.91 USD|4.7 lb|OPW|Black|new|no| 11BP-0300|11BP-0300|OPW 11BP-0300 Unleaded Automatic Nozzle - Red|The OPW 11BP® Series is designed for use in retail and commercial filling applications including prepay, self and full service, credit/debit card readers or card-lock systems to help prevent gasoline spills. The OPW 11BP® will not open until the pumping system is pressurized, and closes automatically when the pressure is removed. Nozzle compatible up to E10 (10% Ethanol).|https://spatco.com/shop/products/opw-11bp-0300-unleaded-automatic-nozzle-red|https://spatco.com//assets/products/images/11BP-0300.jpg|in stock|102.32 USD|2.73 lb|OPW|Red|new|no| 11B-0900|11B-0900|OPW 11B-0900 Leaded Prepay Nozzle - Yellow|The OPW 11B® Series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene.|https://spatco.com/shop/products/opw-11b-0900-leaded-prepay-nozzle-yellow|https://spatco.com//assets/products/images/11B-0900.jpg|in stock|94.45 USD|2.73 lb|OPW|Yellow|new|no| 11B-0500|11B-0500|OPW 11B-0500 Leaded Prepay Nozzle - Blue|The OPW 11B® Series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene.|https://spatco.com/shop/products/opw-11b-0500-leaded-prepay-nozzle-blue|https://spatco.com//assets/products/images/11B-0500.jpg|in stock|104.94 USD|2.73 lb|OPW|Blue|new|no| 11B-0300|11B-0300|OPW 11B-0300 Leaded Prepay Nozzle - Red|The OPW 11B® Series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills.|https://spatco.com/shop/products/opw-11b-0300-leaded-prepay-nozzle-red|https://spatco.com//assets/products/images/11B-0300.jpg|in stock|104.94 USD|2.73 lb|OPW|Red|new|no| 11A-0400|11A-0400|OPW 11A-0400 Leaded Fuel Nozzle - Black|The OPW 11® Series automatic nozzles are OPW’s premium conventional nozzles for safe retail and commercial petroleum filling. The OPW 11® Series is the most trusted conventional nozzle in the world for full service use. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. 11A Nozzles are no longer permitted and sold with Hold-Open Clips per UL 2586 requirements.|https://spatco.com/shop/products/opw-11a-0400-diesel-fuel-nozzle-black|https://spatco.com//assets/products/images/11A-0400.jpg|in stock|92.87 USD|3 lb|OPW|Black|new|no| 11A-0100|11A-0100|OPW 11A-0100 Leaded Fuel Nozzle - Green|The OPW 11® Series automatic nozzles are OPW’s premium conventional nozzles for safe retail and commercial petroleum filling. The OPW 11® Series is the most trusted conventional nozzle in the world for full service use. Nozzle compatible up to B5 (5% Biodiesel), Fuel Oil and Kerosene. 11A Nozzles are no longer permitted and sold with Hold-Open Clips per UL 2586 requirements. |https://spatco.com/shop/products/opw-11a-0100-diesel-fuel-nozzle-green|https://spatco.com//assets/products/images/11A-0100.jpg|in stock|85.52 USD|4 lb|OPW|Green|new|no| 10RFT-5750|10RFT-5750|OPW 10RFT-5750 1-1/2 inch Female Single Replacement Valve Top|Use with 10BF-5725 Single Poppet Emergency Shut-Off Valves. OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at grade level to minimize hazards associated with collision or fire at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, activating poppets and shutting off the flow of fuel. |https://spatco.com/shop/products/opw-1-1-2-inch-female-single-replacement-valve-top-use-with-10bf-5725-single-poppet-emergency-shut-off-valves|https://spatco.com//assets/products/images/10RFT-5750.jpg|in stock|76.8 USD|6 lb|OPW||new|no| 10BHMP-5830|10BHMP-5830|OPW 10BHMP-5830 1-1/2 inch Double Poppet Emergency Shut-Off Valve with Male Top|OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at grade level to minimize hazards associated with collision or fire at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, activating poppets and shutting off the flow of fuel.|https://spatco.com/shop/products/opw-1-1-2-inch-double-poppet-emergency-shut-off-valve-with-male-top-replaces-10rmsp|https://spatco.com//assets/products/images/10BHMP-5830.jpg|in stock|230.5 USD|10 lb|OPW||new|no| 10BF-5725|10BF-5725|OPW 10BF-5725 1-1/2 inch Single Poppet Emergency Shut-Off Valve - Female NPT|Strategically designed to install beneath fuel dispensers at grade-level to minimize the hazards resulting from fire or collision at the dispenser. If the dispenser is pulled over or dislodged by collision, the top of the valve breaks off at the integral shear groove, activating poppets and shutting off the flow of fuel. Equipped with 1-1/2 inch female NPT threaded outlets for fast- reliable connection. The 10BF-5725 is also equipped with a 3/8 inch test port.|https://spatco.com/shop/products/opw-1-1-2-inch-single-poppet-emergency-shut-off-valve-female-npt|https://spatco.com//assets/products/images/10BF-5725.jpg|in stock|164.09 USD|3 lb|OPW||new|no| TCT-2509|TCT-2509|OPW TCT-2509 Test Jumper for Double Wall Coupling|9 inch Test Jumper for Air Stem. For for DPC and SBC Series.|https://spatco.com/shop/products/opw-test-jumper-for-double-wall-coupling|https://spatco.com//assets/products/images/TCT-2509.jpg|in stock|28.07 USD|1 lb|OPW||new|no| TBA-3020|TBA-3020|OPW TBA-3020 3 inch to 2 inch FRP Test Boot with Test Port|FlexWorks Test Boots are used to isolate and air-test the interstitial space between the primary and secondary pipe. One test boot is required for each pipe end.|https://spatco.com/shop/products/opw-3-inch-to-2-inch-frp-test-boot-with-test-port|https://spatco.com//assets/products/images/TBA-3020.jpg|in stock|40.54 USD|0.4 lb|OPW||new|no| SL-1100|SL-1100|OPW SL-1100 Urethane Sealant|This all-purpose adhesive/sealant is a moisture cure polyurethane based formula. Can be used as an entry fitting sealant as well as to bond dispenser tops.|https://spatco.com/shop/products/opw-urethane-sealant|https://spatco.com//assets/products/images/SL-1100.jpg|in stock|24.31 USD|1 lb|OPW||new|no| SBK-1800|SBK-1800|OPW SBK-1800 Stabilizer Bar Kit for the Gilbarco Encore Series|Provides reliable support inside dispenser sumps/pans for emergency shear valves. One kit is required for each emergency valve and vapor shear valve. Stabilizer bar is installed widthwise in dispenser sump.|https://spatco.com/shop/products/opw-stabalizer-bar-kit-for-the-encore-series|https://spatco.com//assets/products/images/SBK-1800.jpg|in stock|92.58 USD|10 lb|OPW||new|no| EBF-0751|EBF-0751|OPW EBF-0751 Conduit Entry Boot - 1/2 inch, 3/4 inch, 1 inch|FlexWorks™ Flexible Entry Boots are reliable, safe seals for pipe and conduit entries into underground containment sumps. The entry boots allow for angled pipe entries and have no exposed metal parts to the underground environment. They are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and access pipe. One test boot is required for each pipe end.|https://spatco.com/shop/products/opw-conduit-entry-boot-1-2-inch-3-4-inch-1-inch|https://spatco.com//assets/products/images/EBF-0751.jpg|in stock|54.6 USD|2 lb|OPW||new|no| HEF-4015|HEF-4015|OPW 4 HEF-4015 inch to 1-1/2 inch Double Entry Boot Fitting for Flexworks Pipes|OPWs FlexWorks™ Double Flexible Entry Boots are designed to seal the sump penetration. These entry boots incorporate both internal and external band clamps to provide additional sealing in harsh environments. Boots firmly fasten and seal to the sump wall using steel studs, fasteners and a galvanized compression ring. These entry boots are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and conduit.|https://spatco.com/shop/products/opw-4-inch-to-1-1-2-inch-double-entry-boot-fitting-for-flexworks-pipe|https://spatco.com//assets/products/images/DEB-4015.jpg|in stock|111.53 USD|5 lb|OPW||new|no| 848480-001|848480-001|Veeder-Root Pressurized Line Leak Detector (Without SwiftCheck)|Veeder-Roots electronic Pressurized Line leak Detection System uses patented measurement technology to test lines at full pump pressure for highly accurate 0.1 gph precision and 3.0 gph gross testing. Two methods of installation give you options that will substantially reduce your costs.|https://spatco.com/shop/products/veeder-root-pressurized-line-leak-detector-without-swiftcheck|https://spatco.com//assets/products/images/848480-001.jpg|in stock|929.71 USD|7 lb|Veeder Root||new|no| 846400-001|846400-001|Veeder-Root 4 inch Mag plus Float Kit for Diesel with 5 foot Cable|Kit includes a product float, water float, boot, two 3/4 adjustable adapters, and cable. The 2 kits also include two 2 non-adjustable adapters. For use with diesel fuels.|https://spatco.com/shop/products/veeder-root-4-inch-mag-plus-float-kit-for-diesel-with-5-foot-cable|https://spatco.com//assets/products/images/846400-001.jpg|in stock|442 USD|3 lb|Veeder Root||new|no| 794380-208|794380-208|Veeder Root 794380-208 Sump Sensor, 12 foot cable|Quickly and accurately detect the presence of hydrocarbons or fluids and differentiate between the two, with Veeder-Root’s dispenser pan and containment sump sensors. Durable and accurate, with no moving parts to wear out or stick, these sensors withstand harsh environments, continuing to detect fluid or hydrocarbons even in freezing temperatures. The housing is constructed of polyester, the sensing element a conductive elastomer, and it can be reused after an alarm is sensed without degradation.|https://spatco.com/shop/products/veeder-root-sump-sensor-12-foot-cable|https://spatco.com//assets/products/images/794380-208.jpg|in stock|451.43 USD|10 lb|Veeder Root||new|no| 576010-695|576010-695|Veeder-Root 576010-695 Lithium Battery with 3.6V for TLS-350|Lithium battery #576010-695 for the Veeder-Root TLS-350 tank monitoring system has 3.6 volts.|https://spatco.com/shop/products/veeder-root-lithium-battery-with-3-6-v-for-tls-350|https://spatco.com//assets/products/images/576010-695.jpg|in stock|79.07 USD|1 lb|Veeder Root||new|no| 514100-328|514100-328|Veeder-Root 514100-328 Thermal Paper Roll for TLS-300 Series (Single Roll)|Thermal paper roll replacement for the TLS-300 Series Automatic Tank Gauge (ATG) Consoles.|https://spatco.com/shop/products/veeder-root-thermal-paper-roll-for-tls-300-series-automatic-tank-gauge-atg-consoles|https://spatco.com//assets/products/images/514100-328.jpg|in stock|6.6 USD|0.5 lb|Veeder Root||new|no| 330272-001|330272-001|Veeder-Root 330272-001 Cable, 5 feet long (standard size)|This cable is used on the Veeder-Root low level tank probe installation kit.|https://spatco.com/shop/products/veeder-root-cable-5-feet-long-standard-size-for-low-level-mag-probe-installation-kit|https://spatco.com//assets/products/images/330272-001.jpg|in stock|117 USD|1 lb|Veeder Root||new|no| UMP200U1-3|UMP200U1-3|Red Jacket UMP200U1-3 2 HP Replacement Motor|This replacement motor is 2HP, 1.5 KW, 208/230 Voltage, Single Phase. For underground storage tanks. Includes blow-out proof stem with double Viton O-ring stem seal. Standard handle can be replaced with a lockable handle.|https://spatco.com/shop/products/red-jacket-2-hp-replacement-motor|https://spatco.com//assets/products/images/UMP200U1-3.jpg|in stock|1298.31 USD|40 lb|Red Jacket||new|no| UMP150U1|UMP150U1|Red Jacket UMP150U1 1-1/2 HP Replacement Motor|Product Details: 1.5HP, 1.13 KW, 208/230 Voltage, Single Phase|https://spatco.com/shop/products/red-jacket-1-1-2-hp-replacement-motor|https://spatco.com//assets/products/images/UMP150U1.jpg|in stock|1325.69 USD|40 lb|Red Jacket||new|no| 880-041-5|880-041-5|Red Jacket 880-041-5 Control Box for 1/3, 3/4, 1-1/2, and 2HP Motors|Red Jacket’s Standard Control Box with 115 VAC Coil for all single-phase 1/3, ¾, 1½, and 2 HP motors is the simplest way to control site fueling. Maintain safe, reliable, efficient fuel flow the Red Jacket’s most basic submersible turbine pump interface. It interfaces between the fuel dispenser and the turbine pump and has an indicator light that signals when a customer begins fueling. It’s also designed as a “lock-out-tag-out” device to ensure safety during maintenance. |https://spatco.com/shop/products/red-jacket-control-box-for-1-3-3-4-1-1-2-and-2hp-motors|https://spatco.com//assets/products/images/880-041-5.jpg|in stock|211.57 USD|3.5 lb|Red Jacket||new|no| 410164-003|410164-003|Red Jacket 410164-003 Capacitor for 2 HP Single Phase STP 40 MFD|Red Jacket Capacitor is for 2 HP Single Phase STP 40 MFD is for underground storage equipment.|https://spatco.com/shop/products/red-jacket-capacitor-for-2-hp-single-phase-stp-40-mfd|https://spatco.com//assets/products/images/410164-003.jpg|in stock|214.2 USD|0.5 lb|Red Jacket||new|no| 410153-001|410153-001|Red Jacket 410153-001 Check Valve Kit for Red Jacket STP and Variable|For Red Jacket submersible turbine pumps (STP) and variable. Includes poppet assembly and spring|https://spatco.com/shop/products/red-jacket-check-valve-kit-for-red-jacket-stp-and-variable|https://spatco.com//assets/products/images/410153-001.jpg|in stock|259.66 USD|2 lb|Red Jacket||new|no| 410152-001|410152-001|Red Jacket 410152-001 Check Valve Housing Kit|Four Inch Red Jacket STP and variable speed replacement part. Includes housing, poppet, and spring.|https://spatco.com/shop/products/red-jacket-check-valve-housing-kit|https://spatco.com//assets/products/images/410152-001.jpg|in stock|340.1 USD|4 lb|Red Jacket||new|no| 323-001-5|323-001-5|Red Jacket 323-001-5 Adjustable Functional Element/Petroleum|Adjustable functional element for non-AG Petroleum Pumps. Compatible with all competitive 4 submersible turbines.|https://spatco.com/shop/products/red-jacket-adjustable-functional-element-petroleum|https://spatco.com//assets/products/images/323-001-5.jpg|in stock|397.8 USD|7 lb|Red Jacket||new|no| 188-241-5|188-241-5|Red Jacket 188-241-5 Syphon Check Valve Assembly|For Red Jacket submersible turbines.|https://spatco.com/shop/products/red-jacket-syphon-check-valve-assembly|https://spatco.com//assets/products/images/188-241-5.jpg|in stock|96.17 USD|3 lb|Red Jacket||new|no| 144-183-5|144-183-5|Red Jacket 144-183-5 Stainless Steel Check Valve Kit - Standard STP|For spill containment and pressure relief of standard Red Jacket 4 inch submersible pumps. Check valve can be raised to help eliminate spills by providing a larger path to depressurize the line and return fuel to the storage tank.|https://spatco.com/shop/products/red-jacket-stainless-steel-check-valve-kit-standard-stp|https://spatco.com//assets/products/images/144-183-5.jpg|in stock|72.57 USD|1.5 lb|Red Jacket||new|no| 144-091-5|144-091-5|Red Jacket 144-091-5 Plug and Lead Harness (Pigtail Kit)|Isolates/protects individual fuel dispensers from wiring shorts or phasing issues. 17 feet long.|https://spatco.com/shop/products/red-jacket-plug-and-lead-harness-pigtail-kit-17-feet-5-2m|https://spatco.com//assets/products/images/144-091-5.jpg|in stock|179.23 USD|9 lb|Red Jacket||new|no| 116-058-5|116-058-5|Red Jacket 116-058-5 FX1DV Diesel Leak Detector|Red Jacket FXV Mechanical Line Leak Detection offers the fastest line leak detection available for hourly monitoring. They are built for superior performance and for keeping operators in compliance – even in the most challenging environments. |https://spatco.com/shop/products/red-jacket-fx1dv-diesel-leak-detector|https://spatco.com//assets/products/images/116-058-5.jpg|in stock|274.98 USD|9 lb|Red Jacket||new|no| 116-056-5|116-056-5|Red Jacket 116-056-5 FX1V Gasoline Leak Detector|Red Jacket FXV Mechanical Line Leak Detection offers the fastest line leak detection available for hourly monitoring. They are built for superior performance and for keeping operators in compliance – even in the most challenging environments. |https://spatco.com/shop/products/red-jacket-fx1v-gasoline-leak-detector|https://spatco.com//assets/products/images/116-056-5.jpg|in stock|274.98 USD|8.5 lb|Red Jacket||new|no| 111-661-5|111-661-5|Red Jacket 111-661-5 25 MFD Capacitor for 1-1/2 HP pump|Compatible with all standard fuels, including gasoline with up to 20% ethanol.|https://spatco.com/shop/products/red-jacket-25-mfd-capacitor-for-1-1-2-hp-pump|https://spatco.com//assets/products/images/111-661-5.jpg|in stock|158.24 USD|0.5 lb|Red Jacket||new|no| 111-092-5|111-092-5|Red Jacket 111-092-5 17.5 MFD Extracta Capacitor for 1/3 and 3/4 HP pumps|Repair part for Red Jacket Standard and Maxxum Big Flo submersible turbines. Compatible with all standard fuels, including gasoline with up to 20% ethanol.|https://spatco.com/shop/products/red-jacket-17-5-mfd-extracta-capacitor-for-1-3-and-3-4-hp-pumps|https://spatco.com//assets/products/images/111-092-5.jpg|in stock|134 USD|3 lb|Red Jacket||new|no| FR701V|FR701V|Fill-Rite Model FR701V 115 Volt AC Pump with 807C Gallon Mechanical Meter|This rugged, positive displacement, heavy duty pump has a 1/3 HP motor (115 VAC-60Hz) with sealed bearings, heavy duty switch, thermal overload protection and junction box. Carbon vanes and ceramic/carbon seals reduce wear and repair expense. Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift. Easy removable strainer, automatic bypass valve, 2 threaded bung for tank openings.|https://spatco.com/shop/products/fill-rite-model-fr701v-115-volt-ac-pump-with-807c-gallon-mechanical-meter|https://spatco.com//assets/products/images/FR701V.jpg|in stock|1019.99 USD|76 lb|Fill-Rite||new|no| FR700|FR700|Fill-Rite Model FR700V 115 Volt AC Pump with Manual Nozzle|This rugged, positive displacement, heavy duty pump is explosion proof UL listed with sealed bearings, heavy duty switch, thermal overload protection and junction box. Carbon vanes and ceramic/carbon seals reduce wear and repair expense. Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift. Easy removable strainer, automatic bypass valve, 2 threaded bung for tank openings. Pump is for use with above ground and underground tanks. Perfect for small fleets.|https://spatco.com/shop/products/fill-rite-model-fr700v-115-volt-ac-pump-with-manual-nozzle|https://spatco.com//assets/products/images/FR700.jpg|in stock|805 USD|64 lb|Fill-Rite||new|no| FR4211H|FR4211H|Fill-Rite Model FR4211H 12V DC High Flow Pump with Hose, Manual Nozzle and Meter|Contractor-grade, industry-standard Fill-Rite DC Fuel Transfer Pump has an explosion-proof motor with permanent magnet. Steel suction pipe telescopes from 22in. to 40in. Features built-in check valve and strainer, hose with static ground wire and thermal overload protection. Comes complete with a 901 Meter and Manual Nozzle. Pad lockable. UL listed. U.S.A.|https://spatco.com/shop/products/fill-rite-model-fr4211h-12v-dc-high-flow-pump-with-hose-manual-nozzle-and-meter|https://spatco.com//assets/products/images/FR4211D.jpg|in stock|1044.33 USD|55 lb|Fill-Rite||new|no| FR4210H|FR4210H|Fill-Rite FR4210H 12V DC High Flow Pump with hose Manual Nozzle|Professional-grade, industry-standard Fill-Rite pump has an explosion-proof motor with permanent magnet. Steel suction pipe telescopes from 22 inches to 40 inches. Features built-in check valve and strainer, hose with static ground wire and thermal overload protection. Manual nozzle included; Pad-lockable. UL listed. Made in the U.S.A.|https://spatco.com/shop/products/fill-rite-model-fr4210g-12-volt-dc-high-flow-pump-with-hose-and-manual-nozzle|https://spatco.com//assets/products/images/FR4210.jpg|in stock|589.99 USD|37 lb|Fill-Rite||new|no| FR311VB|FR311VB|Fill-Rite Model FR311VB 115/230V High Flow AC Pump|This heavy duty cast iron pump is perfect for large fleets. For use with above ground and underground tanks. Motor has sealed bearings, heavy-duty switch and thermal overload protection. Has built-in junction box, cast iron pump housing with iron rotor and carbon vanes. |https://spatco.com/shop/products/fill-rite-model-fr311vb-115-230v-high-flow-ac-pump|https://spatco.com//assets/products/images/FR311VB.jpg|in stock|1939.99 USD|98 lb|Fill-Rite||new|no| FR152|FR152|Fill-Rite Model FR152 Piston Hand Pump with Steel Telescoping Tube, Hose and Nozzle Spout|Pump has an aluminum body with a stainless steel liner. Provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel. Pump easily mounts to a standard drum with 2 NPT threaded tank adaptor. Made in the USA. |https://spatco.com/shop/products/fill-rite-model-fr152-piston-hand-pump-with-steel-telescoping-tube-hose-and-nozzle-spout|https://spatco.com//assets/products/images/FR152.jpg|in stock|268.67 USD|20 lb|Fill-Rite||new|no| 807C|807C|Fill-Rite Model 807C Three Wheel Mechanical, 3/4 inch Meter|The 807C Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 807C is a 3 wheel mechanical meter designed for transfer pumps with a flow rate of 5 to 20 GPM. this meter has a 3/4 in. inlet and outlet.|https://spatco.com/shop/products/fill-rite-model-807c-three-wheel-mechanical-3-4-inch-meter|https://spatco.com//assets/products/images/807C.jpg|in stock|258.27 USD|10 lb|Fill-Rite||new|no| 700KTF2659|700KTF2659|Fill-Rite 700KTF2659 Pump Repair Kit for Series 700B|The rebuild kit consists of: (700G8380) Rotor (1), (Kit700Sl) Seal Assy (1), (700H0534) Vane (8), (700F2762) Poppet Buna N (1), (700F2800) O‐Ring (1), (700F3131) Rotor Key (1), (800F4380) Gasket (1), (1200F6455) O‐Ring (1), (300F7743) Gasket (1), (300F7744) Gasket (1), (700G7063) Rotor Cover (1), (300G7296) Screws (2), (700F2670) Gasket Fluorocarbon (1)|https://spatco.com/shop/products/fill-rite-700ktf2659-pump-repair-kit-for-series-700b|https://spatco.com//assets/products/images/700KTF2659.jpg|in stock|217 USD|5 lb|Fill-Rite||new|no| 1211|1211|Fill-Rite Model FR1211H 12 Volt DC Pump with Hose, Manual Nozzle Meter|This industry standard DC pump dispenses up to 15 GPM (57 LPM). The FR1211H is ideal for pumping gas, diesel fuel and kerosene. With an amp draw thats easy on your DC power source. Explosion-proof UL/cUL listed 1/4 HP motor. The FR1211H comes complete with an 807C meter, 12 ft. static wire hose and manual nozzle.|https://spatco.com/shop/products/fill-rite-model-fr1211g-12-volt-dc-pump-with-hose-manual-nozzle-and-meter|https://spatco.com//assets/products/images/1211.jpg|in stock|798.2 USD|47 lb|Fill-Rite||new|no| 1210|1210|Fill-Rite Model FR1210H 12 Volt DC Pump with Hose and Manual Nozzle|Fill-Rite® DC powered pumps provide the flexibility and power to handle even your most difficult applications. DC power means mobility. Whether you mount the pump on a skid tank, in a truck bed, or install it on a large bulk tank at a remote construction site, a Fill-Rite H-series DC pump delivers high flow and rugged dependability. This industry standard DC pump dispenses up to 15 GPM (57 LPM). The FR1210H is ideal for pumping gas, diesel fuel and kerosene. With an amp draw thats easy on your DC power source. |https://spatco.com/shop/products/fill-rite-model-fr1210h-12-volt-dc-pump-with-hose-and-manual-nozzle|https://spatco.com//assets/products/images/1210.jpg|in stock|534.73 USD|40 lb|Fill-Rite||new|no| 112|112|Fill-Rite Model FR112 Rotary Hand Pump Complete|Cast aluminum Fill-Rite pump provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel. Improved seal keeps water out. Pump easily mounts to a standard drum with 2 inch NPT. Anti-siphoning device, hose with static wire and a 20 in. to 34-3/4 inch telescoping suction pipe. Pad-lockable pump can be set up for reverse flow and is adaptable for drums, kegs or storage tanks. Made in the U.S.A.|https://spatco.com/shop/products/fill-rite-model-fr112-rotary-hand-pump-complete|https://spatco.com//assets/products/images/112.jpg|in stock|255.67 USD|24 lb|Fill-Rite||new|no| GP5-4WAY|GP5-4WAY|B and K Model GP5-4WAY Four Way One Section Gauge Pole with Overall length of 5 feet|Printed on 4 sides: 1. Inches 2. 1000 Gallons 3. 550 Gallons 4. 275 Gallons|https://spatco.com/shop/products/bandk-four-way-one-section-gauge-pole-with-overall-length-of-5-feet|https://spatco.com//assets/products/images/GP5-4WAY.jpg|in stock|13.46 USD|10 lb|BK Tank Guage||new|no| 3FL-18|3FL-18|B and K Model 3FL-18 Three Sectional Fold-N-Lock Gauge Stick with Overall length of 18 feet|B and K’s Fold-N-Lock Sticks are perfect for those who like a one piece pole but don’t have the storage for a long pole and may be in an outlying area where delivery is difficult.|https://spatco.com/shop/products/bandk-model-3fl-18-three-sectional-fold-n-lock-gauge-stick-with-overall-length-of-18-feet|https://spatco.com//assets/products/images/3FL-18.jpg|in stock|41.92 USD|25 lb|BK Tank Guage||new|no| FS105|FS105|Netgear Model FS105 Five Port, 10/100 Mbps Fast Ethernet Switch with AutoUpLink|The NETGEAR FS105 5-Port Fast Ethernet Switch links up to five PCs or peripherals to instantly expand your local area network. Each port supports up to 200 Mbps in dedicated bandwidth, while automatic flow control ensures smooth traffic. The switch includes status LEDs for power, link, speed, and activity for each port. If your network has existing 10BASE-T devices, they will work seamlessly within a higher bandwidth environment with each port achieving its full speed. Plug in your Ethernet cables and connect a power cord, and youre ready to go.|https://spatco.com/shop/products/netgear-model-fs105-five-port-10-100-mbps-fast-ethernet-switch-with-auto-uplink|https://spatco.com//assets/products/images/FS105.jpg|in stock|39.3 USD|3 lb|NETGEAR||new|no| T20306-G1R|T20306-G1R|Gilbarco T20306-G1 Advantage Crind Regulator Board|Refurbished printed circuit board assembly CRIND regulator for the Gilbarco Advantage dispenser.|https://spatco.com/shop/products/gilbarco-advantage-crind-regulator-board|https://spatco.com//assets/products/images/T20306-G1R.jpg|in stock|108.33 USD|1.1 lb|Gilbarco||new|no| T20076-G3R|T20076-G3R|Gilbarco T20076-G3 Advantage Pump Interface Board|Remanufactured part for the Gilbarco Advantage fueling dispenser.|https://spatco.com/shop/products/gilbarco-advantage-pump-interface-board|https://spatco.com//assets/products/images/T20076-G3R.jpg|in stock|130 USD|0.85 lb|Gilbarco||new|no| T20013-G1|T20013-G1|Gilbarco T20013-G1 Advantage Digital Flow Control Valve|Has a 4 bolt flange. Fits Gilbarco Advantage dispenser.|https://spatco.com/shop/products/gilbarco-advantage-digital-control-valve|https://spatco.com//assets/products/images/T20013-G1.jpg|in stock|354.75 USD|3.5 lb|Gilbarco||new|no| T19976-G3R|T19976-G3R|Gilbarco T19976-G3 C+ Meter for Encore Series Dispenser|This meter can be used in Encore dispensers as well as Eclipse and Gasboy dispensers. Electronically calibrated. Refund of $75.00 with return of core.|https://spatco.com/shop/products/gilbarco-c-meter-for-encore-series-dispenser|https://spatco.com//assets/products/images/T19976-G3R.jpg|in stock|308.35 USD|17 lb|Gilbarco||new|no| T19684-03|T19684-03|Gilbarco T19684-03 Grade Select Membrane Keypad|Membrane Switch for Soda Button Grade Select for Gilbarco.|https://spatco.com/shop/products/gilbarco-grade-select-membrane-keypad|https://spatco.com//assets/products/images/T19684-03.jpg|in stock|27.03 USD|0.25 lb|Gilbarco||new|no| T19569-10|T19569-10|Gilbarco T19569-10 Advantage Membrane Keypad - Single Line Crind|Advantage Membrane Switch for Single Line non-ADA CRIND. Use with T18724 series overlays.|https://spatco.com/shop/products/gilbarco-advantage-membrane-keypad-single-line-crind|https://spatco.com//assets/products/images/T19569-10.jpg|in stock|22.5 USD|0.25 lb|Gilbarco||new|no| T19525-03|T19525-03|Gilbarco T19525-03 Monochrome Keypad|Monochrome keypad for info screen. Fits Gilbarco fueling dispensers. |https://spatco.com/shop/products/gilbarco-monochrome-keypad|https://spatco.com//assets/products/images/T19525-03.jpg|in stock|29 USD|0.25 lb|Gilbarco||new|no| T19301-G1|T19301-G1|Gilbarco T19301-G1 Legacy I.S. Barrier Board|I.S. Barrier Board is for Gilbarco Legacy series fuel dispensers.|https://spatco.com/shop/products/gilbarco-legacy-i-s-barrier-board|https://spatco.com//assets/products/images/T19301-G1.jpg|in stock|162.33 USD|2 lb|Gilbarco||new|no| T18350-G1R|T18350-G1R|Gilbarco T18350-G1 Advantage Pulser|G-3 Pulser, 125:1, 75 Volt, fits Gilbarco Advantage dispenser. Refund of $50.00 with return of core.|https://spatco.com/shop/products/gilbarco-advantage-pulser|https://spatco.com//assets/products/images/T18350-G1R.jpg|in stock|243.77 USD|7 lb|Gilbarco||new|no| T18188-G4R|T18188-G4R|Gilbarco T18188-G4 Advantage Crind Printer Assembly with Control Board|Printer fits the Gilbarco Advantage dispenser. |https://spatco.com/shop/products/gilbarco-advantage-crind-printer-assy-with-control-board|https://spatco.com//assets/products/images/T18188-G4R.jpg|in stock|285 USD|2 lb|Gilbarco||new|no| T17651-G1R|T17651-G1R|Gilbarco T17651-G1 Distribution Box Board - Refurbished (used on PA0261)|Circuit board is for use on PA0261 Gilbarco POS distribution boxes.|https://spatco.com/shop/products/gilbarco-distribution-box-board-used-on-pa0261|https://spatco.com//assets/products/images/T17651-G1R.jpg|in stock|99.5 USD|2 lb|Gilbarco||new|no| T17622-G8|T17622-G8|Gilbarco T17622-G8 Advantage 1/2 inch LCD Backlight|The 1/2 LCD reflector assembly is for the Gilbarco Advantage dispenser.|https://spatco.com/shop/products/gilbarco-advantage-1-2-inch-lcd-backlight|https://spatco.com//assets/products/images/T17622-G8.jpg|in stock|33.93 USD|2 lb|Gilbarco||new|no| Q13180-04|Q13180-04|Gilbarco Q13180-04 GSM Gender Mender|Gilbarco GSM Gender Mender is model #Q13180-04.|https://spatco.com/shop/products/gilbarco-gsm-gender-mender|https://spatco.com//assets/products/images/Q13180-04.jpg|in stock|10.47 USD|0.25 lb|Gilbarco||new|no| Q12519-02|Q12519-02|Gilbarco Q12519-02 Printer Door Fastener Stud |Plastic 1/4 turn printer door fastener stud comes in a package of 50. Black in color.|https://spatco.com/shop/products/gilbarco-advantage-printer-door-fastener-stud-q12519-02s|https://spatco.com//assets/products/images/Q12519-02.jpg|in stock|3.35 USD|0.4 lb|Gilbarco||new|no| Q12519-01|Q12519-01|Gilbarco Q12519-01 Printer Door Fastener Receptacle|Plastic female knob for Gilbarco dispenser printer doors.|https://spatco.com/shop/products/encore-printer-door-fastener-receptacle-pkg-50-q12519-01s|https://spatco.com//assets/products/images/Q12519-01.jpg|in stock|3.35 USD|0.4 lb|Gilbarco||new|no| Q12448-04|Q12448-04|Gilbarco Q12448-04 Subminiature Incandescent Lamp|Replacement screw-in lamp for Gilbarco Advantage dispenser.|https://spatco.com/shop/products/gilbarco-subminiature-incandescent-bulb|https://spatco.com//assets/products/images/Q12448-04.jpg|in stock|4.18 USD|1 lb|Gilbarco||new|no| PA024TC20R|PA024TC20R|Gilbarco PA024TC20 Advantage C-Meter (Rebuilt)|This meter is for the Gilbarco Advantage Dispenser A side. Discharge port is 90 degrees to right of calibration dial. Plastic swivel ball and pin on shaft. Refund of $198.03 with return of core. |https://spatco.com/shop/products/gilbarco-advantage-c-meter|https://spatco.com//assets/products/images/PA024TC20R.jpg|in stock|604.1 USD|13 lb|Gilbarco||new|no| M08228K003|M08228K003|Gilbarco M08228K003 Encore FlexPay Encrypted Pin Pad (EPP)|Used in new Encore dispensers and Encore and Advantage retrofit kits built prior to Oct 2011. Requires a network specific security key upon installation by a Gilbarco ASC. Use M09291K001 for programming cables.|https://spatco.com/shop/products/gilbarco-encore-flexpay-encrypted-pin-pad-epp|https://spatco.com//assets/products/images/M08228K003.jpg|in stock|1952.62 USD|5 lb|Gilbarco||new|no| M07763B002|M07763B002|Gilbarco M07763B002 Encore Keypad, Customer Alpha Numeric Input|Use with ENE1702 overlays.|https://spatco.com/shop/products/gilbarco-encore-keypad-customer-alpha-numeric-input|https://spatco.com//assets/products/images/M07763B002.jpg|in stock|24.95 USD|0.1 lb|Gilbarco||new|no| M04119A001RF|M04119A001RF|Gilbarco M04119A001RF Encore USB CRIND Printer for Encore 500 Dispensers|Used on Encore 500 dispensers built after 2004. Can be used to replace M13832A001 printer module by pulling pins and removing printer chute and paper bucket. Refund of $375.00 with return of core.|https://spatco.com/shop/products/gilbarco-encore-usb-crind-printer-for-encore-500-dispensers|https://spatco.com//assets/products/images/M04119A001RF.jpg|in stock|641.67 USD|3 lb|Gilbarco||new|no| M03651A002R|M03651A002R|Gilbarco M03651A002 Crind Logic Printed Circuit Board Assembly|Crind Logic Printed Circuit Board Assembly is for the Gilbarco Advantage and Encore dispensers.|https://spatco.com/shop/products/gilbarco-advantage-encore-crind-logic-printed-circuit-board-assembly|https://spatco.com//assets/products/images/M03651A002R.jpg|in stock|260 USD|1 lb|Gilbarco||new|no| M02136B001|M02136B001|Gilbarco M02136B001 Encore Dual Head Card Reader|This reader is made to fit Gilbarco Encore dispensers.|https://spatco.com/shop/products/gilbarco-encore-dual-head-card-reader|https://spatco.com//assets/products/images/M02136B001.jpg|in stock|116.58 USD|0.25 lb|Gilbarco||new|no| M01254B003|M01254B003|Gilbarco M01254B003 Encore Keypad, Monochrome Softkey Display|Use with ENE0301 Series overlays.|https://spatco.com/shop/products/gilbarco-encore-keypad-monochrome-softkey-display|https://spatco.com//assets/products/images/M01254B003.jpg|in stock|35.1 USD|1 lb|Gilbarco||new|no| M01047A005|M01047A005|Gilbarco M01047A005 Encore Nozzle Boot|Mounting screws (M01118B004) sold separately.|https://spatco.com/shop/products/gilbarco-encore-nozzle-boot|https://spatco.com//assets/products/images/M01047A005.jpg|in stock|116.41 USD|5 lb|Gilbarco||new|no| M00246A001|M00246A001|Gilbarco M00246A001 Encore Digital Control Valve Kit|Digital Control Valve Kit is for the Gilbarco Encore fuel dispenser.|https://spatco.com/shop/products/gilbarco-encore-digital-control-valve-kit-for-the-encore-dispenser|https://spatco.com//assets/products/images/M00246A001.jpg|in stock|250 USD|3 lb|Gilbarco||new|no| M00141B002|M00141B002|Gilbarco M00141B002 Customer Input Keypad for Encore 300 and 500 Dispensers|Customer Input Keypad for Gilbarco Encore 300 and Encore 500 Dispensers. Use with EU03004 Series overlays with M00141B002 keypad switches.|https://spatco.com/shop/products/gilbarco-encore-customer-input-keypad-for-encore-300-and-500-dispensers|https://spatco.com//assets/products/images/M00141B002.jpg|in stock|35.1 USD|0.4 lb|Gilbarco||new|no| K96663-02GEN|K96663-02GEN|Gilbarco K96663-02GEN Encore / Advantage - Monochrome Display Replacement Kit for Dispensers|This drop-in replacement for Gilbarco Encore™, 500, 300 and Advantage™ dispensers is easy to install. Has an LED backlight.|https://spatco.com/shop/products/gilbarco-encore-advantage-monochrome-display-replacement-kit-for-dispensers|https://spatco.com//assets/products/images/K96663-02GEN.jpg|in stock|183.33 USD|1.7 lb|Gilbarco||new|no| K94254-01|K94254-01|Gilbarco K94254-01 Advantage Meter Check Valve Kit|Valve kit is for the Gilbarco Advantage fuel dispenser meter.|https://spatco.com/shop/products/gilbarco-advantage-meter-check-valve-kit|https://spatco.com//assets/products/images/K94254-01.jpg|in stock|100.7 USD|3 lb|Gilbarco||new|no| K14195|K14195|Gilbarco K14195 Assembly PB SEAL and WIRE 4 LG|Seal and wire assembly 4 Large, is for Gilbarco Multi-Product Dispensers (3 and 6 Hose Units). |https://spatco.com/shop/products/gilbarco-assy-pb-seal-and-wire-4-lg|https://spatco.com//assets/products/images/K14195.jpg|in stock|3.17 USD|0.65 lb|Gilbarco||new|no| EU01003G001|EU01003G001|Gilbarco EU01003G001 Encore Monochrome Softkey|For use on these brands of Gilbarco Encore fueling dispensers: 76, Circle K, Citgo, Conoco, Kangaroo Express, Marathon, Murphy, Pilot, RaceTrac, and Sunoco.|https://spatco.com/shop/products/gilbarco-encore-monochrome-softkey|https://spatco.com//assets/products/images/EU01003G001.jpg|in stock|24.73 USD|0.1 lb|Gilbarco||new|no| ENE1702G001|ENE1702G001|Gilbarco ENE1702G001 Encore Overlay, Alpha Numeric Standard English (Outright)|Overlay is standard E Cim Alpha Numeric for Gilbarco Encore dispensers.|https://spatco.com/shop/products/gilbarco-encore-overlay-alpha-numeric-standard-englishoutright|https://spatco.com//assets/products/images/ENE1702G001.jpg|in stock|16.53 USD|1 lb|Gilbarco||new|no|