SPATCO > Submersible Pumps, Motors & Leak Detectors > Submersible Pumps
Top Discharge 316 Cast Stainless Steel Submersible Pump 230 Volt 1HP

Top Discharge 316 Cast Stainless Steel Submersible Pump 230 Volt 1HP

Item #RX750SS-230

BJM's Bullet Series Top Discharge 316 Cast Stainless Steel Pumps pass liquid up and around the motor before discharging. This ensures better motor cooling in low level liquid applications.

Price

$3,560

  • Thermal and amp overload
  • All parts exposed to pumped liquids are made of 316 Stainless Steel.
  • Elastomers are made of FKM.
  • Standard 33ft. power cord made of oil-resistant material
  • Three Seal Motor Protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • 1HP
  • 3450 RPM
  • 230V
  • 1PH60Hz