Franklin Fueling PMA-150 1 1/2 HP Pump Motor Assembly for 4-Inch. Submersible Turbine Pump

Franklin Fueling PMA-150 1 1/2 HP Pump Motor Assembly for 4-Inch. Submersible Turbine Pump

Item #PMA-150

FE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping. FE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products. If ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.

Price

$1,417.00

60 Hz Pump Motor

  • 1½ Hp fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.
  • Standard pressure (150, two-stage) model, max. pressure = 32 psi.
  • High pressure (H150, three-stage) model, max.
    pressure = 45 psi.

60 Hz Power Requirements

  • 1½ Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power.
  • 1½ Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 15 microfarad.
  • SPGC-220 single-phase Guardian Controllers and STP-CBS single-phase control boxes are available for 1½ Hp
    pump control.
  • Max. motor draw: 11 Amps.