SPATCO > Fuel Monitoring > Systems and Consoles
Pneumercator LC 1000

Pneumercator LC 1000

Item #LC1000

The Pneumercator LC 1000 series alarm consoles are designed for use with any tank mounted sensing device that transmits an alarm condition by opening or closing switch contacts. While the controls are usable with a variety of field sensors, the LCs are optimized for level control. They assure complete safety and minimum installation cost by requiring only low current, intrinsically safe wiring between console and tank switch. Housed in a water-tight enclosure, the solid state circuitry provides from one (1) to four (4) alarm channels for monitoring up to four independent sensing points. Bright incandescent alarm lights and a loud sounding horn warn of alarm conditions. Dry contacts are provided for controlling your external devices such as pumps, valves, or remote alarm stations.

Pneumercator LC 1000 Benefits

  • Consoles can monitor multiple tanks 
  • High and low level warning lights 
  • Audible alarm with reset button 
  • Multiple switches 
  • Push button test 
  • Intrinsically safe operation of tank mounted sensors
  • Power Input:  120 VAC ± 10%, 60 Hz; Fuse — .10 AMP, AG-SLO BLO
  • Power to Field Sensor:  Low electrical energy; 12 VDC at 15mA provided by control unit to each sensor switch. Safe for Class I, Division 1, Groups A, B, C, D; Class II Division 1, Groups E, G.
  • Control Relay Output:  Dry switch contact — SPDT per point, rated 3 AMPS at 120 VAC; selectable either normally open or normally closed.
  • Response Time:  Typically 1/2 second. Automatic horn silence option, adjustable 30 seconds to 3 minutes.
  • Indicators/Controls:  Red light indicates alarm condition; horn signals audible alarm — 85dB min.; reset button silences alarm; test button tests alarm circuits
  • Temperature:  -40 °F to 160 °F (-40 °C to 71 °C)
  • Enclosure:  NEMA 4-weatherproof standard
  • Installation:  Wall mount standard
  • Weight:  6 lb (2.7 kg) approx. — small case; 11 lb (5 kg) approx. — large case
  • Sensor Cable:  Standard 2 conductor #18AWG; up to 5000 feet (1524 m) (by customer)

Approvals/Certifications:

  • FM approved; File no. 1Q3A4.AX